search

mkaiser / Sungrow-SHx-Inverter-Modbus-Home-Assistant

Sungrow SH Integration for Home Assistant for SH3K6, SH4K6, SH5K-20, SH5K-V13, SH3K6-30, SH4K6-30, SH5K-30, SH3.RS, SH3.6RS, SH4.0RS, SH5.0RS, SH6.0RS, SH5.0RT, SH6.0RT, SH8.0RT, SH10RT, SH5.0RT-20, SH6.0RT-20, SH8.0RT-20, SH10RT-20, SH5.0RT-V112, SH6.0RT-V112, SH8.0RT-V112, SH10RT-V112, SH5.0RT-V122, SH6.0RT-V122, SH8.0RT-V122, SH10RT-V122, SH4.6R
378 stars 95 forks source link

Inverter temperature reported as unknown #31

Closed elektrinis closed 1 year ago

elektrinis commented 2 years ago

Unknown temperature. I was getting temperature with SunGather integration, however it was not correct, +15 degrees of actual. Not sure where's the issue. temperature

mkaiser commented 1 year ago

works here. Can you restart, wait and re-check?

elektrinis commented 1 year ago

I have restarted both HA and inverter, also updated inverter firmware. Still the same :| How can I help to figure this out?

mkaiser commented 1 year ago

are you still getting no temperature?`

Which LAN port are you using?

elektrinis commented 1 year ago

Still Unknown. I'm using the built-in port, not via dongle.

mkaiser commented 1 year ago

are all other values working?

I am using the SH10.RT, too. Therefore we should have a very similar setup

elektrinis commented 1 year ago

Yes everything else seems fine, only temperature is missing. How can I help?

mkaiser commented 1 year ago

Any updates with these temperature-issues? Maybe Sungrow updated some firmware?