Inverter State - unknown

[argually]

Before you create an issue, make sure to update to the current version of modbus_sungrow.yaml

Describe the bug: My Inverter state under "EMS & Battery Settings" is set to "Self-consumption mode (default)". When I set this the inverter state switches to "unknwon - you should not see me".

If I change the EMS-mode-Settings to "Forced mode" then the inverter mode state changes to "forced mode". If I reset the mode to "Self-consumption mode (default)" it goes back into "unknown mode - you should not see me."

At "Battery status" it shows a battery capacity of 0,0 kWh. But our BYD battery has 12.8 kWh capacity...

A clear and concise description of what the bug is. The Inverter state can´t be changed to "Self-consumption mode (default)".

Your Sungrow inverter:

• Model: SH-10.RT v112
• The inverter is connected via (mark one)
  • [] LAN (internal port)
  • [] WiNet-S (LAN)
  • [x] WiNet-S (WLAN)

• Are you using a Modbus Proxy (mark one)
  • [] yes
  • [x] no
  • [] I don't know what that is

Home Assistant version:

• Version: [e.g. 2024.6.4]

modbus_sungrow.yaml:

• Version/ time stamp : [e.g. 2024-04-05] (see header of the file)
• [x] I ensured to use the most recent version

Inverter Firmware Status:

• [x] I made sure that the newest firmware is installed via the installers account

To Reproduce Steps to reproduce the behavior:

1. Go to '...'
2. Click on '....'
3. Scroll down to '....'
4. See error

Expected behavior A clear and concise description of what you expected to happen.

Screenshots If applicable, add screenshots to help explain your problem.

Additional context Add any other context about the problem here.

[bjornenvall]

I have the same problem after installing the last inverter firmware.

[argually]

I installed the latest firmware to solve the problem…

[argually]

but it didn’t solve it…