search

mkaiser / Sungrow-SHx-Inverter-Modbus-Home-Assistant

Sungrow SH Integration for Home Assistant for SH3K6, SH4K6, SH5K-20, SH5K-V13, SH3K6-30, SH4K6-30, SH5K-30, SH3.RS, SH3.6RS, SH4.0RS, SH5.0RS, SH6.0RS, SH5.0RT, SH6.0RT, SH8.0RT, SH10RT, SH5.0RT-20, SH6.0RT-20, SH8.0RT-20, SH10RT-20, SH5.0RT-V112, SH6.0RT-V112, SH8.0RT-V112, SH10RT-V112, SH5.0RT-V122, SH6.0RT-V122, SH8.0RT-V122, SH10RT-V122, SH4.6R
310 stars 80 forks source link

Imported Energy Cost #83

Closed mschneider82 closed 10 months ago

mschneider82 commented 1 year ago

Hi, In the Tesla Dashboard there are two unknown entities

                entity: sensor.daily_imported_energy_cost_3
                entity: sensor.daily_exported_energy_compensation_3

How to create these entities with my custom kwh costs?

mschneider82 commented 1 year ago

cc @Louis712

Louisbertelsmann commented 1 year ago

I created those with the values given from the energy dashboard built in to home assistant. I found, that those aren't reliable. I will probably Do a pullrequest to add that stuff. You can copy the templates and add them to your configuration. Unfortunately I probably won't get to it until this evening.

Louisbertelsmann commented 1 year ago

I'll create a pull request as soon as the other feature is tested. Might take a couple of days. If you want to have it now, here I have it with the templates. here

hAMMERlized commented 1 year ago

Hi,

anything happened here so far? i have the same issue. i copied the content of the modbus_sungrow.yaml which younhave linked above, but it's still the sam issue.

Louisbertelsmann commented 1 year ago

You should change the entities in the dashboard.

hAMMERlized commented 1 year ago

You should change the entities in the dashboard.

Not sure if right but the only entities which could fit in there that i could finde are "sensor.daily_exported_energy_compensation_2" and "sensor.daily_imported_energy_cost_2". Is this right?

Thanks for the quick response btw.

Louisbertelsmann commented 1 year ago

That's right.

hAMMERlized commented 1 year ago

ok but it satay at 0,0€ for both, exported and imported. Where does the sensors take the amount (€) for the imported kWh and exported kWh from? Did i miss some option where to edit the exact amount?

Louisbertelsmann commented 1 year ago

Right, I created input numbers for that. They're called "Set energy cost/compensation per kWh".