search

mkaiser / Sungrow-SHx-Inverter-Modbus-Home-Assistant

Sungrow SH Integration for Home Assistant for SH3K6, SH4K6, SH5K-20, SH5K-V13, SH3K6-30, SH4K6-30, SH5K-30, SH3.RS, SH3.6RS, SH4.0RS, SH5.0RS, SH6.0RS, SH5.0RT, SH6.0RT, SH8.0RT, SH10RT, SH5.0RT-20, SH6.0RT-20, SH8.0RT-20, SH10RT-20, SH5.0RT-V112, SH6.0RT-V112, SH8.0RT-V112, SH10RT-V112, SH5.0RT-V122, SH6.0RT-V122, SH8.0RT-V122, SH10RT-V122, SH4.6R
375 stars 95 forks source link

Grid Frequency Scale #84

Closed ehajo closed 1 year ago

ehajo commented 1 year ago

Got 500Hz on SH8.0RT, don't know if others are affected... Changed parameter

Louisbertelsmann commented 1 year ago

Are you using the RJ45 port on the inverter? If you are using the one on the WiFi module, that's the problem.

ehajo commented 1 year ago

hi louis, ah ok. i am using the connector on the wifi-module... i am not able to get the other one working....

Louisbertelsmann commented 1 year ago

That's the thing. The other one is probably working, you just need the WiFi module to send the data to iSolarCloud. Your ideal setup would be to run two ethernet cables, one to the internal lan port and a second one for the WiFi module. Huge fan of your BNO055 breakout, btw.

ehajo commented 1 year ago

oh, did not need the isolarcloud since your great implementation into home assistant :-) but tried a lot but native connector is not working :-(

thank you :-)

Louisbertelsmann commented 1 year ago

Maybe restart your inverter to get the internal LAN port to get a new ip address? You can look at the procedure in this issue here.

ehajo commented 1 year ago

thank you, i will give it a try!

dylan09 commented 1 year ago

but tried a lot but native connector is not working :-(

Did you take a look at your router which IP address was assigned when you connect the LAN port? It gets a different IP address. So you have to change the IP address in secrects.yaml.

mkaiser commented 1 year ago

@ehajo

could you solve the LAN connection issue?

ehajo commented 1 year ago

i tried it today! had to buy a poe-switch and so on to get a 2nd lan-port outdoor.... frequency is working as attended with the native lan-port instead of the cloud-dongle. so just as you said:

mkaiser commented 1 year ago

great!

thank you for the feedback :)