search

mletenay / home-assistant-goodwe-inverter

Experimental version of Home Assistant integration for Goodwe solar inverters
https://discord.gg/TaXyWXT
MIT License
146 stars 38 forks source link

Swiching Modes General - Eco discharge mode: timetabels lost #270

Open Triggerfinger123 opened 5 months ago

Triggerfinger123 commented 5 months ago

I want to switch between the modes

The Eco charge & discharge do not create the "Battery work mode group".
When creating it in the solargo app, it works. Switching to General mode, they are deleted. (and need to put back manually). Also the eco-mode is not selected when in Eco charge/discharge.

I have a GW 20K-ET inverter and version V0.9.9.16. Can anyone help me with this problem?

mletenay commented 5 months ago

This is intentional. If you want to keep the schedule specified in inverter, use standard "Eco Mode". Eco charge/Eco discharge modes are special "synthetic" modes, which set the schedule 1 to "always" and clear the rest/ HA is then assumed to use automations to switch it on/off when required.

Triggerfinger123 commented 5 months ago

Switching from "Eco Mode" to "Eco Charge/Discharge Mode" the schedule 1 is set active. => OK Switching from ""Eco Charge/Discharge Mode" to "Eco Mode", the schedule 1 is not deactivated! => NOK

saltydog256 commented 1 week ago

And presumably set the parameters (like % power) or use the appropriate sliders? Slick implementation, I have a 10KET, SBP5000, 5038EM and 3048EM all using it on one installation with 40kWh of storage in 3 different locations. Perhaps like Triggerfinger, sometimes the changeover is not consistent, but I'll post if I nail it. There are a lot of moving parts.