Open tomasvida opened 9 months ago
have you found a solution? If so can you please post the code for ESPhome
have you found a solution? If so can you please post the code for ESPhome
Have a look at the code on my GitHub as that might help you out !
Unfortunately I didn't solve it, but I will take a look at the link of a colleague who answered here today
Thanks for the help I have used an ESP32 and changed the following settings. But it does not work.
esp32: board: esp32dev framework: type: arduino
Does something need to be adjusted here? uart: id: uart_bus tx_pin: 1 #GPIO1 or 1 tx pin for pylontech uart rx_pin: 3 #GPIO3 or 3 rx pin for pylontech uart baud_rate: 115200 # baudrate for pylontech uart rx_buffer_size: 2048
website is accessible but without data. Time | level | Tag | Message 19:41:23 | [I] | [safe_mode:041] | Boot seems successful; resetting boot loop counter 19:41:23 | [D] | [esp32.preferences:114] | Saving 1 preferences to flash... 19:41:23 | [D] | [esp32.preferences:143] | Saving 1 preferences to flash: 0 cached, 1 written, 0 failed 19:44:41 | [I] | [main:1308] | Testing pwrsys commands 19:44:41 | [I] | [main:1311] | This has send the pwrsys command 19:44:41 | [D] | [uart_debug:158] | >>> "pwrsys\r\n"
Ok so a few things what pylontech is it ? Some of them require you to send a weird command before it will respond! Also the Esp32 might be different pins!
It all depends if the pylontech is on a certain firmware version. I haven’t done sending the command as I updated my firmware and it fixed it for me but I can help if you get stuck
Polontech US3000C 10.01.2023 (Console RJ45) ESP32 WROM conect to TX (GPIO1) and RX (GPIO3)
Dear Mletenay, thank you for your work. It is very useful and fills the holes left by the manufacturer's technology. I have been using your integration of the good we inverter into the home assistant for a very long time. Thank you for her! Now I'm trying to get the pylontech integration working, but I keep having problems with it, I can't do it. I tried to use esp32 and ESP8266 but there is no difference between them. I am successfully using the Pylontech Battery Monitoring via WiFi integration that you mention in your tutorial. It works perfectly. But when I upload esphome to ESP, with the attached configuration, I am not able to connect with the help of your integration. Can you please advise me where I am doing wrong? esphome-web-726110.txt
Many thanks! Tomas