Closed GoogleCodeExporter closed 9 years ago
The pins' initialization is in the GSM.cpp
Decomment the appropriate lines if you're using pin 4 and 5 (standard version)
or 2 and 3 (new upcoming version)
Let me know.
Marco
Original comment by martines...@gmail.com
on 18 Mar 2012 at 1:20
Original comment by dmg...@gmail.com
on 18 Mar 2012 at 2:46
> pinMode(GSM_ON, OUTPUT);
> pinMode(GSM_RESET, OUTPUT);
He right, I wrote you email in Jan, that you add this lines in project...
Original comment by dmg...@gmail.com
on 18 Mar 2012 at 3:07
Ok, I missed it and the email. Thank you. I've added these lines right now. But
I never had problems for this issue.
Original comment by martines...@gmail.com
on 18 Mar 2012 at 8:51
In some variants it is may work not properly.
For example, set GSM_ON on pin 13 (with LED), and see result with and without
this command.
Original comment by dmg...@gmail.com
on 19 Mar 2012 at 6:06
int softpowerbutton = 6; // elec freaks shield's soft power button attached to
digital 6 pin
void setup()
{
pinMode(softpowerbutton, OUTPUT);
}
void loop()
{
digitalWrite(ledPin, HIGH); // push to button
delay(1000);
digitalWrite(ledPin, LOW);
}
Original comment by taylanek...@gmail.com
on 22 Sep 2012 at 9:48
also soft reset button attached to the digital pin5
Original comment by taylanek...@gmail.com
on 22 Sep 2012 at 9:49
Original comment by martines...@gmail.com
on 11 Dec 2012 at 5:01
This issue section is not longer supported.
Please check the support page www.gsmlib.org
Original comment by martines...@gmail.com
on 6 Jul 2013 at 11:27
Original issue reported on code.google.com by
far...@gmail.com
on 17 Mar 2012 at 8:14