Closed GoogleCodeExporter closed 9 years ago
Sorry but this library it is developed only for Futurashop/Open-electronics
shields.
Marco
Original comment by martines...@gmail.com
on 14 Jan 2013 at 9:31
[deleted comment]
Ok, that's fair. If I change to the Open-Electronics Shield: Does the Library
run on Leonardo on Serial1 Pin D0/D1?
Original comment by bsi...@gmail.com
on 14 Jan 2013 at 10:35
Unfortunately I don't know Leonardo.
I'm sure that it works with Open-Eletcronics Shield and Arduino.
But if Leonardo shield is 100% compatible with Arduino Uno. Yes It will work.
Marco
Original comment by martines...@gmail.com
on 14 Jan 2013 at 10:50
To use this lib with Leonardo follow these two steps:
1) Change in GSM.cpp the pin for communication
#define _GSM_TXPIN_ 10
#define _GSM_RXPIN_ 11
2) Connect manually the serial pins of the shield (central pin of the strip
with SW-HW) to the pin 10 and 11. Looking the shield the pin of the left strip
to the 10 of Leonardo and the pin of the right strip to the 11 of Leonardo.
CHECK THE PHOTOS
now upload and use it :)
Original comment by martines...@gmail.com
on 9 Mar 2013 at 1:44
Attachments:
This issue section is not longer supported.
Please check the support page www.gsmlib.org
Original comment by martines...@gmail.com
on 6 Jul 2013 at 11:27
Original issue reported on code.google.com by
bsi...@gmail.com
on 11 Jan 2013 at 4:51