Closed ADMiNZ closed 2 years ago
If you used the firmware.bin
, then that is not the way in which you can flash the firmware to the lamp using esptool.
Check out my flashing guide
I recommend the use of ESPHome-Flasher, but if you want to flash the firmware using esptool, then follow the instructions in the guide, to make sure that you also flash a bootloader, partition info and such.
Maybe it does work if you flash the plain firmware-factory.bin
instead, using write_flash 0x0
, because that contains all required parts too. I never tried this method though, since that factory firmware build output is rather new.
If you used the
firmware.bin
, then that is not the way in which you can flash the firmware to the lamp using esptool. Check out my flashing guide I recommend the use of ESPHome-Flasher, but if you want to flash the firmware using esptool, then follow the instructions in the guide, to make sure that you also flash a bootloader, partition info and such.Maybe it does work if you flash the plain
firmware-factory.bin
instead, usingwrite_flash 0x0
, because that contains all required parts too. I never tried this method though, since that factory firmware build output is rather new.
Thanks a lot! The only problem was that I did not stitch it like that :)))
Happy we got that stitched then 🪡 Enjoy your lamp!
Hello.
The firmware is assembled without errors. Stitched without errors.
The download field does not work, the power buttons do not work and I do not see the device on the network :(
xiaomi-bslamp2.yaml
Validate xiaomi-bslamp2.yaml
logs_xiaomi-bslamp2_compile.txt
CMD
I have a backup - and after its return - everything works.
P.S: Of course the current repository is flooded. \192.168...\config\esphome\custom_components\xiaomi_bslamp2