search

mmmiiilll / dslrdashboard

Automatically exported from code.google.com/p/dslrdashboard
0 stars 0 forks source link

0.30.32 can not control D800 with WIFI #209

Open GoogleCodeExporter opened 8 years ago

GoogleCodeExporter commented 8 years ago 
After update to 0.30.32, app can not control my D800 with wifi router, but can 
do with OTG cable.
0.30.30 is ok.

Original issue reported on code.google.com by dadof...@gmail.com on 16 Feb 2014 at 12:44

GoogleCodeExporter commented 8 years ago 
PS: after update, click "connect openwrt/linux" no response

Original comment by dadof...@gmail.com on 16 Feb 2014 at 12:49

GoogleCodeExporter commented 8 years ago 
I have the same issue. Tried to update the router to the latest ddserver 
version and now I get the IO error not found.

Original comment by kenwishn...@gmail.com on 16 Feb 2014 at 9:11

GoogleCodeExporter commented 8 years ago 
try open cv neon.

Original comment by artisdar...@gmail.com on 17 Feb 2014 at 10:15

GoogleCodeExporter commented 8 years ago 
A new version for OpenWRT (v ....0.12.bin ) as well DslrDashboard V0.30.33.apk

New files can be found here:
https://drive.google.com/folderview?id=0BxMZ8XY3H2wiNmtrS0FtLTJxR1E&usp=sharing

DslrDashboard V0.30.33.apk can be found also at Google Play

Original comment by Babyloni...@gmail.com on 19 Feb 2014 at 9:48

GoogleCodeExporter commented 8 years ago 
Again, thanks Babylonianbird for helping out.

If you have problems updating the router firmware you can try the follwing in 
OpenWrt web interface (http://192.168.1.1 by default)
Go to 'System->Backup/Flash firmware' and press the 'Perform reset' button. 
After this the router should reboot.
Now again go to 'System->Backup/Flash firmware'. Uncheck the 'Keep settings' 
checkbox.
Select the new firmware (sysupgrade image) and flash it.

Be sure to choose the right 'sysupgrade' image that matches your router version 
(V1, V2).
Be sure your MR3040 battery is charged, or it is connected to charger.
Be sure to wait 2-4 minutes after you press the flash button (do not power off 
your MR3040).
Watch the MR3040 LEDS after your pressed the flash button. It should restart 
itself.

Original comment by hub...@gmail.com on 25 Feb 2014 at 10:10