search

mohankreddy / javadrone

Automatically exported from code.google.com/p/javadrone
0 stars 0 forks source link

Drone does not always initialize completely #12

Closed GoogleCodeExporter closed 9 years ago

GoogleCodeExporter commented 9 years ago 
Often times I have to start the PS3Flight and ControlTower apps multiple times 
until the drone fully initializes. This happens mostly when the drone is 
accessed for the first time after it was powered up. Maybe the initialize 
command has to be sent repeatedly similar to the start and land commands?

Original issue reported on code.google.com by normen667 on 23 May 2011 at 8:41

GoogleCodeExporter commented 9 years ago

Original comment by normen667 on 23 May 2011 at 9:03

GoogleCodeExporter commented 9 years ago 
What error you getting? Connection timeout? Or it just does not respond to 
commands?
I have enabled logging in ControlTower, please try again and report what errors 
you are getting in log.

If error persist, try to:

1. Ping drone
2. Telnet to drone

to see if this is networking problem. I have similar issue sometimes and I have 
to reset Drone to solve it. I suspect it is something on drone side.

Original comment by kroko...@gmail.com on 24 May 2011 at 11:04

GoogleCodeExporter commented 9 years ago 
I see that drone stays in BOOTSTRAP mode without switching to DEMO.

Original comment by kroko...@gmail.com on 26 May 2011 at 10:04

GoogleCodeExporter commented 9 years ago

Original comment by kroko...@gmail.com on 26 May 2011 at 11:16