dawiepoolman commented 6 years ago

Hi guys

After having deleted and re-started downloading the blockchain a week ago I started seeing errors again:

I have been following this guide for the setup.

I have used this refined command to launch monerod with more manageable block-sync-size:

./bin/monero-v0.12.3.0/monerod --rpc-bind-ip=192.168.1.10 --rpc-bind-port=4008 --confirm-external-bind --max-concurrency 1 --block-sync-size 20

It was running very stable up to this point. I have a 2Tb external hdd connected to the pi. Is the mapping correc?

./bin/monero-v0.12.3.0/monerod --rpc-bind-ip=192.168.1.10 --rpc-bind-port=4008 --confirm-external-bind --max-concurrency 1 --block-sync-size 20 --log-level 1

produces:

./bin/monero-v0.12.3.0/monerod --rpc-bind-ip=192.168.1.10 --rpc-bind-port=4008 --confirm-external-bind --db-salvage

Is the database corrupted again?

moneromooo-monero commented 6 years ago

You seem to be out of memory. Or something is trying to allocate a whole lot. Use more memory, add swap, etc. Do you have a stack trace for the crash ?

dawiepoolman commented 6 years ago

Hi moneromoo I am struggling to figure out how to produce/analyse the stack trace with gdb (I have no idea how this works tbh)

When I ran ''' gdb ./bin/monero-v0.12.3.0/monerod run --rpc-bind-ip=192.168.1.10 --rpc-bind-port=4008 --confirm-external-bind --max-concurrency 1 --block-sync-size 20 --log-level 1 ''' I got this

I have tried increasing the swap file in the manual from 1000 to 5000 but when I ran '''sudo dphys-swapfile setup ''' it appeared to have capped it to a max default of 2048MB Would that be sufficient for --block-sync-size 20? I tried with --block-sync-size 1 as well but I get the same issue

moneromooo-monero commented 6 years ago

That should be enough, and sync size should not really matter a whole lot here.

But the db is probably corrupt indeed if you get a SIGSEGV there. You can type "bt" to get the stack trace at the crash point (you have just the tip here).

dawiepoolman commented 6 years ago

Cool, I was close :P Here is the stack trace

0 0x0093ed64 in mdb_midl_xmerge ()

1 0x00938ee6 in mdb_page_alloc.isra ()

2 0x0093a430 in mdb_page_new ()

3 0x0093a634 in mdb_node_add ()

4 0x0093cb68 in mdb_cursor_put ()

5 0x007c8640 in cryptonote::BlockchainLMDB::add_txpool_tx(cryptonote::transaction const&, cryptonote::txpool_tx_meta_t const&) ()

6 0x008124e4 in cryptonote::tx_memory_pool::add_tx(cryptonote::transaction&, crypto::hash const&, unsigned int, cryptonote::tx_verification_context&, bool, bool, bool, unsigned char) ()

7 0x008039aa in cryptonote::core::add_new_tx(cryptonote::transaction&, crypto::hash const&, crypto::hash const&, unsigned int, cryptonote::tx_verification_context&, bool, bool, bool) ()

8 0x0080405c in cryptonote::core::handle_incoming_txs(std::cxx11::list<std::cxx11::basic_string<char, std::char_traits, std::allocator >, std::allocator<std::__cxx11::basic_string<char, std::char_traits, std::allocator > > > const&, std::vector<cryptonote::tx_verification_context, std::allocator >&, bool, bool, bool) ()

9 0x007a4374 in cryptonote::t_cryptonote_protocol_handler::try_add_next_blocks(cryptonote::cryptonote_connection_context&) ()

10 0x007a62de in cryptonote::t_cryptonote_protocol_handler::handle_response_get_objects(int, cryptonote::NOTIFY_RESPONSE_GET_OBJECTS::request&, cryptonote::cryptonote_connection_context&) ()

11 0x006b727e in int epee::net_utils::buff_to_t_adapter<cryptonote::t_cryptonote_protocol_handler, cryptonote::NOTIFY_RESPONSE_GET_OBJECTS::request, cryptonote::cryptonote_connection_context, boost::_bi::bind_t<int, boost::_mfi::mf3<int, cryptonote::t_cryptonote_protocol_handler, int, cryptonote::NOTIFY_RESPONSE_GET_OBJECTS::request&, cryptonote::cryptonote_connection_context&>, boost::_bi::list4<boost::_bi::value<cryptonote::t_cryptonote_protocol_handler>, boost::arg<1>, boost::arg<2>, boost::arg<3> > > >(cryptonote::t_cryptonote_protocol_handler, int, std::__cxx11::basic_string<char, std::char_traits, std::allocator > const&, boost::_bi::bind_t<int, boost::_mfi::mf3<int, cryptonote::t_cryptonote_protocol_handler, int, cryptonote::NOTIFY_RESPONSE_GET_OBJECTS::request&, cryptonote::cryptonote_connection_context&>, boost::_bi::list4<boost::_bi::value<cryptonote::t_cryptonote_protocol_handler*>, boost::arg<1>, boost::arg<2>, boost::arg<3> > >, cryptonote::cryptonote_connection_context&) ()

12 0x006b82f4 in int cryptonote::t_cryptonote_protocol_handler::handle_invoke_map(bool, int, std::cxx11::basic_string<char, std::char_traits, std::allocator > const&, std::cxx11::basic_string<char, std::char_traits, std::allocator >&, cryptonote::cryptonote_connection_context&, bool&) ()

13 0x006b84aa in int nodetool::node_server<cryptonote::t_cryptonote_protocol_handler >::handle_invoke_map<nodetool::p2p_connection_context_t >(bool, int, std::cxx11::basic_string<char, std::char_traits, std::allocator > const&, std::cxx11::basic_string<char, std::char_traits, std::allocator >&, nodetool::p2p_connection_context_t&, bool&) ()

14 0x006b8732 in nodetool::node_server<cryptonote::t_cryptonote_protocol_handler >::notify(int, std::__cxx11::basic_string<char, std::char_traits, std::allocator > const&, nodetool::p2p_connection_context_t&) ()

15 0x007b0890 in epee::levin::async_protocol_handler<nodetool::p2p_connection_context_t >::handle_recv(void const*, unsigned int) ()

16 0x007bea76 in epee::net_utils::connection<epee::levin::async_protocol_handler<nodetool::p2p_connection_context_t > >::handle_read(boost::system::error_code const&, unsigned int) ()

17 0x007a7f2a in void boost::asio::detail::strand_service::dispatch<boost::asio::detail::binder2<boost::_bi::bind_t<void, boost::_mfi::mf2<void, epee::net_utils::connection<epee::levin::async_protocol_handler<nodetool::p2p_connection_context_t > >, boost::system::error_code const&, unsigned int>, boost::_bi::list3<boost::_bi::value<boost::shared_ptr<epee::net_utils::connection<epee::levin::async_protocol_handler<nodetool::p2p_connection_context_t > > > >, boost::arg<1> ()(), boost::arg<2> ()()> >, boost::system::error_code, unsigned int> >(boost::asio::detail::strand_service::strand_impl&, boost::asio::detail::binder2<boost::_bi::bind_t<void, boost::_mfi::mf2<void, epee::net_utils::connection<epee::levin::async_protocol_handler<nodetool::p2p_connection_context_t > >, boost::system::error_code const&, unsigned int>, boost::_bi::list3<boost::_bi::value<boost::shared_ptr<epee::net_utils::connection<epee::levin::async_protocol_handler<nodetool::p2p_connection_context_t > > > >, boost::arg<1> ()(), boost::arg<2> (*)()> >, boost::system::error_code, unsigned int>&) ()

18 0x007a8110 in boost::asio::detail::completion_handler<boost::asio::detail::rewrapped_handler<boost::asio::detail::binder2<boost::asio::detail::wrapped_handler<boost::asio::io_context::strand, boost::_bi::bind_t<void, boost::_mfi::mf2<void, epee::net_utils::connection<epee::levin::async_protocol_handler<nodetool::p2p_connection_context_t > >, boost::system::error_code const&, unsigned int>, boost::_bi::list3<boost::_bi::value<boost::shared_ptr<epee::net_utils::connection<epee::levin::async_protocol_handler<nodetool::p2p_connection_context_t > > > >, boost::arg<1> ()(), boost::arg<2> ()()> >, boost::asio::detail::is_continuation_if_running>, boost::system::error_code, unsigned int>, boost::_bi::bind_t<void, boost::_mfi::mf2<void, epee::net_utils::connection<epee::levin::async_protocol_handler<nodetool::p2p_connection_context_t > >, boost::system::error_code const&, unsigned int>, boost::_bi::list3<boost::_bi::value<boost::shared_ptr<epee::net_utils::connection<epee::levin::async_protocol_handler<nodetool::p2p_connection_context_t > > > >, boost::arg<1> ()(), boost::arg<2> ()()> > > >::do_complete(void, boost::asio::detail::scheduler_operation, boost::system::error_code const&, unsigned int) ()

19 0x007a833e in void boost::asio::detail::strand_service::dispatch<boost::asio::detail::rewrapped_handler<boost::asio::detail::binder2<boost::asio::detail::wrapped_handler<boost::asio::io_context::strand, boost::_bi::bind_t<void, boost::_mfi::mf2<void, epee::net_utils::connection<epee::levin::async_protocol_handler<nodetool::p2p_connection_context_t > >, boost::system::error_code const&, unsigned int>, boost::_bi::list3<boost::_bi::value<boost::shared_ptr<epee::net_utils::connection<epee::levin::async_protocol_handler<nodetool::p2p_connection_context_t > > > >, boost::arg<1> ()(), boost::arg<2> ()()> >, boost::asio::detail::is_continuation_if_running>, boost::system::error_code, unsigned int>, boost::_bi::bind_t<void, boost::_mfi::mf2<void, epee::net_utils::connection<epee::levin::as---Type to continue, or q to quit---

dawiepoolman commented 6 years ago

19 0x007a833e in void boost::asio::detail::strand_service::dispatch<boost::asio::detail::rewrapped_handler<boost::asio::detail::binder2<boost::asio::detail::wrapped_handler<boost::asio::io_context::strand, boost::_bi::bind_t<void, boost::_mfi::mf2<void, epee::net_utils::connection<epee::levin::async_protocol_handler<nodetool::p2p_connection_context_t > >, boost::system::error_code const&, unsigned int>, boost::_bi::list3<boost::_bi::value<boost::shared_ptr<epee::net_utils::connection<epee::levin::async_protocol_handler<nodetool::p2p_connection_context_t > > > >, boost::arg<1> ()(), boost::arg<2> ()()> >, boost::asio::detail::is_continuation_if_running>, boost::system::error_code, unsigned int>, boost::_bi::bind_t<void, boost::_mfi::mf2<void, epee::net_utils::connection<epee::levin::as---Type to continue, or q to quit---

ync_protocol_handler<nodetool::p2p_connection_context_t > >, boost::system::error_code const&, unsigned int>, boost::_bi::list3<boost::_bi::value<boost::shared_ptr<epee::net_utils::connection<epee::levin::async_protocol_handler<nodetool::p2p_connection_context_t > > > >, boost::arg<1> ()(), boost::arg<2> ()()> > > >(boost::asio::detail::strand_service::strand_impl&, boost::asio::detail::rewrapped_handler<boost::asio::detail::binder2<boost::asio::detail::wrapped_handler<boost::asio::io_context::strand, boost::_bi::bind_t<void, boost::_mfi::mf2<void, epee::net_utils::connection<epee::levin::async_protocol_handler<nodetool::p2p_connection_context_t > >, boost::system::error_code const&, unsigned int>, boost::_bi::list3<boost::_bi::value<boost::shared_ptr<epee::net_utils::connection<epee::levin::async_protocol_handler<nodetool::p2p_connection_context_t > > > >, boost::arg<1> ()(), boost::arg<2> ()()> >, boost::asio::detail::is_continuation_if_running>, boost::system::error_code, unsigned int>, boost::_bi::bind_t<void, boost::_mfi::mf2<void, epee::net_utils::connection<epee::levin::async_protocol_handler<nodetool::p2p_connection_context_t > >, boost::system::error_code const&, unsigned int>, boost::_bi::list3<boost::_bi::value<boost::shared_ptr<epee::net_utils::connection<epee::levin::async_protocol_handler<nodetool::p2p_connection_context_t > > > >, boost::arg<1> ()(), boost::arg<2> (*)()> > >&) ()

20 0x007a847c in boost::asio::detail::reactive_socket_recv_op<boost::asio::mutable_buffers_1, boost::asio::detail::wrapped_handler<boost::asio::io_context::strand, boost::_bi::bind_t<void, boost::_mfi::mf2<void, epee::net_utils::connection<epee::levin::async_protocol_handler<nodetool::p2p_connection_context_t > >, boost::system::error_code const&, unsigned int>, boost::_bi::list3<boost::_bi::value<boost::shared_ptr<epee::net_utils::connection<epee::levin::async_protocol_handler<nodetool::p2p_connection_context_t > > > >, boost::arg<1> ()(), boost::arg<2> ()()> >, boost::asio::detail::is_continuation_if_running> >::do_complete(void, boost::asio::detail::scheduler_operation, boost::system::error_code const&, unsigned int) ()

21 0x006e3276 in boost::asio::detail::epoll_reactor::descriptor_state::do_complete(void, boost::asio::detail::scheduler_operation, boost::system::error_code const&, unsigned int) ()

22 0x00678e16 in boost::asio::detail::scheduler::run(boost::system::error_code&) ()

23 0x0078c770 in epee::net_utils::boosted_tcp_server<epee::levin::async_protocol_handler<nodetool::p2p_connection_context_t > >::worker_thread() ()

24 0x00a86f8c in thread_proxy ()

25 0x76ef8fc4 in start_thread (arg=0x667ff450) at pthread_create.c:335

26 0x76e84bc8 in ?? () at ../sysdeps/unix/sysv/linux/arm/clone.S:76 from /lib/arm-linux-gnueabihf/libc.so.6

Backtrace stopped: previous frame identical to this frame (corrupt stack?)

dawiepoolman commented 6 years ago

rm data.mdb and start again with 2048MB RAM instead of 1000MB?

moneromooo-monero commented 6 years ago

I now think the memory's ok, the DB being shot probably causes it to request silly amounts based on bad data. Maybe hyc can help more here.

dawiepoolman commented 6 years ago

so I deleted the mdb and restarted. after a few hours ... should i run fsck?

dawiepoolman commented 6 years ago

Hi guys, FYI, I cross posted this issue to the r/pinode subreddit to ask for help there w.r.t. what could also be Pi setup related errors u/shermand100 has been very helpful too

dawiepoolman commented 6 years ago

Hi guys

I failed again:

2018-10-07 19:50:20.452 [P2P2] INFO global src/cryptonote_protocol/cryptonote_protocol_handler.inl:1171 [185.152.64.176:18080 OUT] Synced 96116/1677909 2018-10-07 19:50:28.878 [P2P2] INFO global src/cryptonote_protocol/cryptonote_protocol_handler.inl:1171 [185.152.64.176:18080 OUT] Synced 96121/1677909 2018-10-07 19:50:31.267 [P2P2] ERROR cn src/cryptonote_basic/cryptonote_format_utils.cpp:987 Failed to parse block from blob Error in `./bin/monero-v0.12.3.0/monerod': munmap_chunk(): invalid pointer: 0x4accc3c8 Aborted pi@xmrpi:~ $

dawiepoolman commented 6 years ago

update I ran: ./bin/monero-v0.12.3.0/monero-blockchain-import --pop-blocks 10

when I resumed monerod it went past the block.
Why would it be so unstable?

dawiepoolman commented 6 years ago

failed again

2018-10-07 20:09:01.940 [P2P4] INFO global src/cryptonote_protocol/cryptonote_protocol_handler.inl:1171 [148.251.89.12:18080 OUT] Synced 96816/1677923 2018-10-07 20:09:02.633 [P2P4] INFO global src/cryptonote_protocol/cryptonote_protocol_handler.inl:1171 [148.251.89.12:18080 OUT] Synced 96821/1677923 2018-10-07 20:09:08.860 [P2P4] WARN blockchain.db.lmdb src/blockchain_db/lmdb/db_lmdb.cpp:75 Failed to add output pubkey to db transaction: MDB_KEYEXIST: Key/data pair already exists 2018-10-07 20:09:11.931 [P2P4] ERROR blockchain src/cryptonote_core/blockchain.cpp:3585 Error adding block with hash: <14f1cc8df986d22a2c9016dd8f5aecc9a7db3a429e724ab0eba392e91732f3e2> to blockchain, what = Failed to add output pubkey to db transaction: MDB_KEYEXIST: Key/data pair already exists 2018-10-07 20:09:11.952 [P2P4] INFO global src/cryptonote_protocol/cryptonote_protocol_handler.inl:1171 [148.251.89.12:18080 OUT] Synced 96825/1677923 2018-10-07 20:10:08.620 [P2P1] ERROR blockchain src/cryptonote_core/blockchain.cpp:3449 Block with id: <14f1cc8df986d22a2c9016dd8f5aecc9a7db3a429e724ab0eba392e91732f3e2> attempting to add transaction already in blockchain with id: <74366d0cb8736eb4368bb663938d705b40d58620038ee404bde971dc39e0ca6f> 2018-10-07 20:10:16.191 [P2P1] ERROR blockchain src/cryptonote_core/blockchain.cpp:3449 Block with id: <14f1cc8df986d22a2c9016dd8f5aecc9a7db3a429e724ab0eba392e91732f3e2> attempting to add transaction already in blockchain with id: <74366d0cb8736eb4368bb663938d705b40d58620038ee404bde971dc39e0ca6f> 2018-10-07 20:10:26.976 [P2P6] ERROR blockchain src/cryptonote_core/blockchain.cpp:3449 Block with id: <14f1cc8df986d22a2c9016dd8f5aecc9a7db3a429e724ab0eba392e91732f3e2> attempting to add transaction already in blockchain with id: <74366d0cb8736eb4368bb663938d705b40d58620038ee404bde971dc39e0ca6f>

dawiepoolman commented 6 years ago

2018-10-07 20:17:07.080 76f12210 INFO global src/cryptonote_core/cryptonote_core.cpp:427 Loading blockchain from folder /home/pi/.bitmonero/lmdb ... Bus error

dawiepoolman commented 6 years ago

gdb ./bin/monero-v0.12.3.0/monerod GNU gdb (Raspbian Copyright (C) License GPLv3+: This is free software: There is NO WARRANTY, and "show This GDB was configured Type "show For bug reporting http://gnu.org/licenses/gpl.html you are free to change and redistribute it. to the extent permitted by law. Type "show copying" warranty" for details. as "arm-linux-gnueabihf". configuration" for configuration details. instructions, please see: .org/software/gdb/bugs/">http://www.gnu.org/software/gdb/bugs/. and other documentation resources online at: .org/software/gdb/documentation/">http://www.gnu.org/software/gdb/documentation/. word" to search for commands related to "word"... from ./bin/monero-v0.12.3.0/monerod...(no debugging symbols found)...done. --rpc-bind-port=4008 --confirm-external-bind --max-concurrency 1 --block-sync-size 5 --log-level 1 /home/pi/bin/monero-v0.12.3.0/monerod --rpc-bind-ip=192.168.1.10 --rpc-bind-port=4008 --confirm-external-bind --max-concurrency 1 --block-sync-size 5 --log-level 1 using libthread_db enabled] library "/lib/arm-linux-gnueabihf/libthread_db.so.1". 76ff6210 INFO global src/daemon/main.cpp:282 Monero 'Lithium Luna' (v0.12.3.0-release) 76ff6210 INFO daemon src/daemon/main.cpp:284 Moving from main() into the daemonize now. 76ff6210 INFO global src/daemon/protocol.h:53 Initializing cryptonote protocol... 76ff6210 INFO global src/daemon/protocol.h:58 Cryptonote protocol initialized OK 76ff6210 INFO global src/daemon/p2p.h:63 Initializing p2p server... 76ff6210 INFO net.throttle contrib/epee/src/network_throttle-detail.cpp:162 Setting LIMIT: 2048 kbps 76ff6210 INFO net.p2p src/p2p/net_node.inl:1875 Set limit-up to 2048 kB/s 76ff6210 INFO net.throttle contrib/epee/src/network_throttle-detail.cpp:162 Setting LIMIT: 8192 kbps 76ff6210 INFO net.throttle contrib/epee/src/network_throttle-detail.cpp:162 Setting LIMIT: 8192 kbps 76ff6210 INFO net.p2p src/p2p/net_node.inl:1888 Set limit-down to 8192 kB/s 76ff6210 INFO net.throttle contrib/epee/src/network_throttle-detail.cpp:162 Setting LIMIT: 2048 kbps 76ff6210 INFO net.p2p src/p2p/net_node.inl:1910 Set limit-up to 2048 kB/s 76ff6210 INFO net.throttle contrib/epee/src/network_throttle-detail.cpp:162 Setting LIMIT: 8192 kbps 76ff6210 INFO net.throttle contrib/epee/src/network_throttle-detail.cpp:162 Setting LIMIT: 8192 kbps 76ff6210 INFO net.p2p src/p2p/net_node.inl:1914 Set limit-down to 8192 kB/s 768b3450 INFO net.p2p src/p2p/net_node.inl:457 dns_threads[0] addr_str: seeds.moneroseeds.se number of results: 0 756ff450 INFO net.p2p src/p2p/net_node.inl:457 dns_threads[2] addr_str: seeds.moneroseeds.ch number of results: 0 74cff450 INFO net.p2p src/p2p/net_node.inl:457 dns_threads[3] addr_str: seeds.moneroseeds.li number of results: 0 760b3450 INFO net.p2p src/p2p/net_node.inl:457 dns_threads[1] addr_str: seeds.moneroseeds.ae.org number of results: 0 76ff6210 INFO net.p2p src/p2p/net_node.inl:495 DNS seed node lookup either timed out or failed, falling back to defaults 76ff6210 INFO net.p2p src/p2p/net_node.inl:357 Added seed node: 107.152.130.98:18080 76ff6210 INFO net.p2p src/p2p/net_node.inl:357 Added seed node: 161.67.132.39:18080 76ff6210 INFO net.p2p src/p2p/net_node.inl:357 Added seed node: 163.172.182.165:18080 76ff6210 INFO net.p2p src/p2p/net_node.inl:357 Added seed node: 195.154.123.123:18080 76ff6210 INFO net.p2p src/p2p/net_node.inl:357 Added seed node: 198.74.231.92:18080 76ff6210 INFO net.p2p src/p2p/net_node.inl:357 Added seed node: 212.83.172.165:18080 76ff6210 INFO net.p2p src/p2p/net_node.inl:357 Added seed node: 212.83.175.67:18080 76ff6210 INFO net.p2p src/p2p/net_node.inl:357 Added seed node: 5.9.100.248:18080 76ff6210 INFO net contrib/epee/include/net/abstract_tcp_server2.inl:910 Set server type to: 2 from name: P2P, prefix_name = P2P 76ff6210 INFO net.p2p src/p2p/net_node.inl:546 Binding on 0.0.0.0:18080 76ff6210 INFO net.p2p src/p2p/net_node.inl:551 Net service bound to 0.0.0.0:18080 76ff6210 INFO net.p2p src/p2p/net_node.inl:2004 Added IGD port mapping. 76ff6210 INFO global src/daemon/p2p.h:68 p2p server initialized OK 76ff6210 INFO global src/daemon/rpc.h:63 Initializing core RPC server... 76ff6210 INFO net contrib/epee/include/net/abstract_tcp_server2.inl:910 Set server type to: 1 from name: RPC, prefix_name = RPC 76ff6210 INFO global contrib/epee/include/net/http_server_impl_base.h:76 Binding on 192.168.1.10:4008 76ff6210 INFO global src/daemon/rpc.h:69 core RPC server initialized OK on port: 4008 76ff6210 INFO global src/daemon/core.h:86 Initializing core... 76ff6210 INFO global src/cryptonote_core/cryptonote_core.cpp:427 Loading blockchain from folder /home/pi/.bitmonero/lmdb ... 76ff6210 INFO blockchain.db.lmdb src/blockchain_db/lmdb/db_lmdb.cpp:528 DB map size: 3074644480 76ff6210 INFO blockchain.db.lmdb src/blockchain_db/lmdb/db_lmdb.cpp:529 Space used: 1632563200 76ff6210 INFO blockchain.db.lmdb src/blockchain_db/lmdb/db_lmdb.cpp:530 Space remaining: 1442081280 76ff6210 INFO blockchain.db.lmdb src/blockchain_db/lmdb/db_lmdb.cpp:531 Size threshold: 0 76ff6210 INFO blockchain.db.lmdb src/blockchain_db/lmdb/db_lmdb.cpp:533 Percent used: 0.5310 Percent threshold: 0.8000

Thread 1 "monerod" received signal SIGBUS, Bus error. 0x009368b0 in mdb_rpage_get () (gdb)

dawiepoolman commented 6 years ago

stuff it. restarting from zero for the 4th and last time...

dawiepoolman commented 6 years ago

(gdb) bt

0 0x009368b0 in mdb_rpage_get ()

1 0x00937f92 in mdb_page_get.isra ()

2 0x009392ce in mdb_page_search_root ()

3 0x0093952c in mdb_page_search ()

4 0x00939970 in mdb_cursor_set ()

5 0x009389e2 in mdb_cursor_get ()

6 0x007d7eb8 in cryptonote::BlockchainLMDB::get_block_blob_from_height[abi:cxx11](unsigned long long const&) const ()

7 0x007c0484 in cryptonote::BlockchainDB::get_block_from_height(unsigned long long const&) const ()

8 0x0095976a in cryptonote::HardFork::rescan_from_block_height(unsigned long long) ()

9 0x0095a758 in cryptonote::HardFork::init() ()

10 0x007f89fe in cryptonote::Blockchain::init(cryptonote::BlockchainDB, cryptonote::network_type, bool, cryptonote::test_options const) ()

11 0x00809f0e in cryptonote::core::init(boost::program_options::variables_map const&, char const, cryptonote::test_options const) ()

12 0x00681d08 in daemonize::t_core::run() ()

13 0x0066f760 in daemonize::t_daemon::run(bool) ()

14 0x006cda74 in daemonize::t_executor::run_interactive(boost::program_options::variables_map const&) ()

15 0x006d1b46 in bool daemonizer::daemonize(int, char const**, daemonize::t_executor&&, boost::program_options::variables_map const&) ()

16 0x00652e66 in main ()

(gdb)

dawiepoolman commented 6 years ago

running for the 4th time from block 0 with:

./bin/monero-v0.12.3.0/monerod --rpc-bind-ip=192.168.1.10 --rpc-bind-port=4008 --confirm-external-bind --max-concurrency 1 --block-sync-size 20

glv2 commented 6 years ago

If you see the problem again, you should try the dmesg command to check if the kernel detected hardware errors that could explain database corruptions.

dawiepoolman commented 6 years ago

Next error

2018-10-08 00:15:24.542 [P2P8] INFO global src/cryptonote_protocol/cryptonote_protocol_handler.inl:1171 [107.10.255.62:18080 OUT] Synced 92332/1678034 2018-10-08 00:16:10.535 [P2P8] INFO global src/cryptonote_protocol/cryptonote_protocol_handler.inl:1171 [107.10.255.62:18080 OUT] Synced 92352/1678035 2018-10-08 00:16:11.194 [P2P8] ERROR blockchain src/cryptonote_core/blockchain.cpp:3585 Error adding block with hash: to blockchain, what = Error adding spent key image to db transaction: Cannot allocate memory 2018-10-08 00:16:14.847 [P2P8] ERROR blockchain src/cryptonote_core/blockchain.cpp:3585 Error adding block with hash: to blockchain, what = Attempting to add transaction that's already in the db (tx id 172038) 2018-10-08 00:16:15.059 [P2P8] INFO global src/cryptonote_protocol/cryptonote_protocol_handler.inl:310 [14.215.45.243:18080 OUT] Sync data returned a new top block candidate: 92352 -> 1678036 [Your node is 1585684 blocks (1565 days) behind] SYNCHRONIZATION started 2018-10-08 00:16:49.660 [P2P8] ERROR blockchain src/cryptonote_core/blockchain.cpp:3585 Error adding block with hash: to blockchain, what = Attempting to add transaction that's already in the db (tx id 172038) 2018-10-08 00:17:26.624 [P2P2] WARN net.dns src/common/dns_utils.cpp:508 WARNING: no two valid MoneroPulse DNS checkpoint records were received 2018-10-08 00:17:26.837 [P2P2] ERROR blockchain src/cryptonote_core/blockchain.cpp:3585 Error adding block with hash: to blockchain, what = Attempting to add transaction that's already in the db (tx id 172038) 2018-10-08 00:17:53.068 [P2P2] ERROR blockchain src/cryptonote_core/blockchain.cpp:3585 Error adding block with hash: to blockchain, what = Attempting to add transaction that's already in the db (tx id 172038) 2018-10-08 00:18:20.734 [P2P4] ERROR blockchain src/cryptonote_core/blockchain.cpp:3585 Error adding block with hash: to blockchain, what = Attempting to add transaction that's already in the db (tx id 172038) 2018-10-08 00:18:32.383 [P2P3] ERROR blockchain src/cryptonote_core/blockchain.cpp:3585 Error adding block with hash: to blockchain, what = Attempting to add transaction that's already in the db (tx id 172038) 2018-10-08 00:18:40.511 [P2P4] ERROR blockchain src/cryptonote_core/blockchain.cpp:3585 Error adding block with hash: to blockchain, what = Attempting to add transaction that's already in the db (tx id 172038) 2018-10-08 00:18:56.613 [P2P0] ERROR blockchain src/cryptonote_core/blockchain.cpp:3585 Error adding block with hash: to blockchain, what = Attempting to add transaction that's already in the db (tx id 172038) 2018-10-08 00:19:12.158 [P2P0] ERROR blockchain src/cryptonote_core/blockchain.cpp:3585 Error adding block with hash: to blockchain, what = Attempting to add transaction that's already in the db (tx id 172038) 2018-10-08 00:19:12.957 [P2P5] ERROR blockchain src/cryptonote_core/blockchain.cpp:3585 Error adding block with hash: to blockchain, what = Attempting to add transaction that's already in the db (tx id 172038) 2018-10-08 00:19:14.385 [P2P2] ERROR blockchain src/cryptonote_core/blockchain.cpp:3585 Error adding block with hash: to blockchain, what = Attempting to add transaction that's already in the db (tx id 172038) 2018-10-08 00:19:26.217 [P2P6] ERROR blockchain src/cryptonote_core/blockchain.cpp:3585 Error adding block with hash: to blockchain, what = Attempting to add transaction that's already in the db (tx id 172038) 2018-10-08 00:19:46.066 [P2P6] ERROR blockchain src/cryptonote_core/blockchain.cpp:3585 Error adding block with hash: to blockchain, what = Attempting to add transaction that's already in the db (tx id 172038) 2018-10-08 00:19:47.358 [P2P5] ERROR blockchain src/cryptonote_core/blockchain.cpp:3585 Error adding block with hash: to blockchain, what = Attempting to add transaction that's already in the db (tx id 172038) 2018-10-08 00:20:00.974 [P2P3] ERROR blockchain src/cryptonote_core/blockchain.cpp:3585 Error adding block with hash: to blockchain, what = Attempting to add transaction that's already in the db (tx id 172038) 2018-10-08 00:20:05.109 [P2P1] ERROR blockchain src/cryptonote_core/blockchain.cpp:3585 Error adding block with hash: to blockchain, what = Attempting to add transaction that's already in the db (tx id 172038) 2018-10-08 00:20:27.419 [P2P2] ERROR blockchain src/cryptonote_core/blockchain.cpp:3585 Error adding block with hash: to blockchain, what = Attempting to add transaction that's already in the db (tx id 172038) 2018-10-08 00:20:32.886 [P2P1] ERROR blockchain src/cryptonote_core/blockchain.cpp:3585 Error adding block with hash: to blockchain, what = Attempting to add transaction that's already in the db (tx id 172038) 2018-10-08 00:20:59.767 [P2P8] ERROR blockchain src/cryptonote_core/blockchain.cpp:3585 Error adding block with hash: to blockchain, what = Attempting to add transaction that's already in the db (tx id 172038) 2018-10-08 00:21:19.007 [P2P1] ERROR blockchain src/cryptonote_core/blockchain.cpp:3585 Error adding block with hash: to blockchain, what = Attempting to add transaction that's already in the db (tx id 172038) 2018-10-08 00:21:20.236 [P2P7] ERROR blockchain src/cryptonote_core/blockchain.cpp:3585 Error adding block with hash: to blockchain, what = Attempting to add transaction that's already in the db (tx id 172038) Error in `./bin/monero-v0.12.3.0/monerod': free(): invalid next size (normal): 0x3f48fd38 Aborted pi@xmrpi:~ $

dawiepoolman commented 6 years ago

pi@xmrpi:~ $ dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.70-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1144 SMP Tue Sep 18 17:34:46 BST 2018 [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 8 MiB at 0x3ac00000 [ 0.000000] On node 0 totalpages: 242688 [ 0.000000] free_area_init_node: node 0, pgdat 80c84f80, node_mem_map ba39f000 [ 0.000000] Normal zone: 2133 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 242688 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 17 pages/cpu @ba348000 s38720 r8192 d22720 u69632 [ 0.000000] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240555 [ 0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=d82c22c1-b686-43fe-9749-68ea4720ac83 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 940228K/970752K available (7168K kernel code, 575K rwdata, 2076K rodata, 1024K init, 706K bss, 22332K reserved, 8192K cma-reserved) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xbb800000 - 0xff800000 (1088 MB) lowmem : 0x80000000 - 0xbb400000 ( 948 MB) modules : 0x7f000000 - 0x80000000 ( 16 MB) .text : 0x80008000 - 0x80800000 (8160 kB) .init : 0x80b00000 - 0x80c00000 (1024 kB) .data : 0x80c00000 - 0x80c8fe8c ( 576 kB) .bss : 0x80c96f10 - 0x80d478b0 ( 707 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 25276 entries in 75 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000022] Switching to timer-based delay loop, resolution 52ns [ 0.000274] Console: colour dummy device 80x30 [ 0.000814] console [tty1] enabled [ 0.000850] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.000890] pid_max: default: 32768 minimum: 301 [ 0.001218] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001251] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002207] Disabling memory control group subsystem [ 0.002301] CPU: Testing write buffer coherency: ok [ 0.002728] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003145] Setting up static identity map for 0x100000 - 0x10003c [ 0.003284] Hierarchical SRCU implementation. [ 0.003982] smp: Bringing up secondary CPUs ... [ 0.004779] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.005624] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.006448] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.006552] smp: Brought up 1 node, 4 CPUs [ 0.006624] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.006645] CPU: All CPU(s) started in HYP mode. [ 0.006663] CPU: Virtualization extensions available. [ 0.007557] devtmpfs: initialized [ 0.017715] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0 [ 0.018387] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 [ 0.018630] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.018674] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.019248] pinctrl core: initialized pinctrl subsystem [ 0.020044] NET: Registered protocol family 16 [ 0.022650] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.027375] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.027407] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.027619] Serial: AMBA PL011 UART driver [ 0.029274] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.029744] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe [ 0.061002] bcm2835-dma 3f007000.dma: DMA legacy API manager at bb813000, dmachans=0x1 [ 0.062437] SCSI subsystem initialized [ 0.062676] usbcore: registered new interface driver usbfs [ 0.062746] usbcore: registered new interface driver hub [ 0.062848] usbcore: registered new device driver usb [ 0.070085] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-09-10 17:26 [ 0.071388] clocksource: Switched to clocksource arch_sys_counter [ 0.148670] VFS: Disk quotas dquot_6.6.0 [ 0.148782] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.148985] FS-Cache: Loaded [ 0.149196] CacheFiles: Loaded [ 0.158046] NET: Registered protocol family 2 [ 0.158783] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.158912] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.159115] TCP: Hash tables configured (established 8192 bind 8192) [ 0.159259] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.159321] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.159564] NET: Registered protocol family 1 [ 0.160037] RPC: Registered named UNIX socket transport module. [ 0.160061] RPC: Registered udp transport module. [ 0.160080] RPC: Registered tcp transport module. [ 0.160099] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.161405] NOHZ: local_softirq_pending 80 [ 0.161645] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available [ 0.164347] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.172250] FS-Cache: Netfs 'nfs' registered for caching [ 0.172866] NFS: Registering the id_resolver key type [ 0.172914] Key type id_resolver registered [ 0.172934] Key type id_legacy registered [ 0.172963] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.174895] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.175051] io scheduler noop registered [ 0.175073] io scheduler deadline registered (default) [ 0.175361] io scheduler cfq registered [ 0.175383] io scheduler mq-deadline registered [ 0.175403] io scheduler kyber registered [ 0.177671] BCM2708FB: allocated DMA memory fad00000 [ 0.177715] BCM2708FB: allocated DMA channel 0 @ bb813000 [ 0.186248] Console: switching to colour frame buffer device 82x26 [ 0.194607] bcm2835-rng 3f104000.rng: hwrng registered [ 0.197065] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 0.202217] vc-sm: Videocore shared memory driver [ 0.204804] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [ 0.218927] brd: module loaded [ 0.229745] loop: module loaded [ 0.232072] Loading iSCSI transport class v2.0-870. [ 0.235039] libphy: Fixed MDIO Bus: probed [ 0.237410] usbcore: registered new interface driver lan78xx [ 0.239741] usbcore: registered new interface driver smsc95xx [ 0.241933] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 0.271990] dwc_otg 3f980000.usb: base=0xf0980000 [ 0.401386] NOHZ: local_softirq_pending 80 [ 0.421386] NOHZ: local_softirq_pending 80 [ 0.441385] NOHZ: local_softirq_pending 80 [ 0.461386] NOHZ: local_softirq_pending 80 [ 0.474396] Core Release: 2.80a [ 0.476410] Setting default values for core params [ 0.478445] Finished setting default values for core params [ 0.680698] Using Buffer DMA mode [ 0.682639] Periodic Transfer Interrupt Enhancement - disabled [ 0.684567] Multiprocessor Interrupt Enhancement - disabled [ 0.686497] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 0.688358] Dedicated Tx FIFOs mode [ 0.690446] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xbad14000 dma = 0xfad14000 len=9024 [ 0.694318] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints Interrupt/Control Split Transaction hack enabled [ 0.704010] dwc_otg: Microframe scheduler enabled [ 0.704066] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805e96c0 [ 0.706082] WARN::hcd_init_fiq:460: FIQ ASM at 0x805e9a28 length 36 [ 0.708076] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000 [ 0.710178] dwc_otg 3f980000.usb: DWC OTG Controller [ 0.712368] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 0.714686] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000 [ 0.717003] Init: Port Power? op_state=1 [ 0.719254] Init: Power Port (0) [ 0.721650] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.723959] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.726256] usb usb1: Product: DWC OTG Controller [ 0.728499] usb usb1: Manufacturer: Linux 4.14.70-v7+ dwc_otg_hcd [ 0.730772] usb usb1: SerialNumber: 3f980000.usb [ 0.733644] hub 1-0:1.0: USB hub found [ 0.735851] hub 1-0:1.0: 1 port detected [ 0.738429] dwc_otg: FIQ enabled [ 0.738434] dwc_otg: NAK holdoff enabled [ 0.738439] dwc_otg: FIQ split-transaction FSM enabled [ 0.738449] Module dwc_common_port init [ 0.738695] usbcore: registered new interface driver usb-storage [ 0.740978] mousedev: PS/2 mouse device common for all mice [ 0.743216] IR NEC protocol handler initialized [ 0.745385] IR RC5(x/sz) protocol handler initialized [ 0.747588] IR RC6 protocol handler initialized [ 0.749761] IR JVC protocol handler initialized [ 0.751853] IR Sony protocol handler initialized [ 0.753944] IR SANYO protocol handler initialized [ 0.756036] IR Sharp protocol handler initialized [ 0.758026] IR MCE Keyboard/mouse protocol handler initialized [ 0.760052] IR XMP protocol handler initialized [ 0.762728] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer [ 0.765073] bcm2835-cpufreq: min=600000 max=1400000 [ 0.767523] sdhci: Secure Digital Host Controller Interface driver [ 0.769650] sdhci: Copyright(c) Pierre Ossman [ 0.772108] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe [ 0.774585] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe [ 0.776876] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.780480] ledtrig-cpu: registered to indicate activity on CPUs [ 0.782898] hidraw: raw HID events driver (C) Jiri Kosina [ 0.785363] usbcore: registered new interface driver usbhid [ 0.787671] usbhid: USB HID core driver [ 0.790511] vchiq: vchiq_init_state: slot_zero = bad80000, is_master = 0

[ 0.803017] [vc_sm_connected_init]: end - returning 0 [ 0.805943] Initializing XFRM netlink socket [ 0.808325] NET: Registered protocol family 17 [ 0.810779] Key type dns_resolver registered [ 0.813582] Registering SWP/SWPB emulation handler [ 0.816614] registered taskstats version 1 [ 0.824955] uart-pl011 3f201000.serial: cts_event_workaround enabled [ 0.827519] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2 [ 0.834276] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0 [ 0.836816] mmc-bcm2835 3f300000.mmc: DMA channel allocated [ 0.892013] sdhost: log_buf @ bad13000 (fad13000) [ 0.933043] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 0.937029] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 0.940892] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 0.945878] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 0.951513] Indeed it is in host mode hprt0 = 00021501 [ 1.027731] random: fast init done [ 1.041434] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 1.044528] of_cfs_init [ 1.046615] of_cfs_init: OK [ 1.049049] Waiting for root device PARTUUID=d82c22c1-b686-43fe-9749-68ea4720ac83... [ 1.071387] NOHZ: local_softirq_pending 80 [ 1.098297] mmc1: new high speed SDIO card at address 0001 [ 1.138400] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.145568] mmc0: new high speed SDHC card at address 1388 [ 1.148276] mmcblk0: mmc0:1388 USD00 29.5 GiB [ 1.151857] mmcblk0: p1 p2 [ 1.161436] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 1.163773] Indeed it is in host mode hprt0 = 00001101 [ 1.401653] usb 1-1: New USB device found, idVendor=0424, idProduct=2514 [ 1.403937] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.406832] hub 1-1:1.0: USB hub found [ 1.409294] hub 1-1:1.0: 4 ports detected [ 1.521406] NOHZ: local_softirq_pending 82 [ 1.523812] NOHZ: local_softirq_pending 82 [ 1.526125] NOHZ: local_softirq_pending 82 [ 1.528343] NOHZ: local_softirq_pending 82 [ 1.731422] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 1.861609] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514 [ 1.863889] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.866557] hub 1-1.1:1.0: USB hub found [ 1.868797] hub 1-1.1:1.0: 3 ports detected [ 2.071470] Under-voltage detected! (0x00050005) [ 2.183703] dwc_otg_handle_wakeup_detected_intr lxstate = 2 [ 2.571412] usb 1-1.1: reset high-speed USB device number 3 using dwc_otg [ 2.821613] usb 1-1.1: USB disconnect, device number 3 [ 2.921413] usb 1-1.1: new high-speed USB device number 4 using dwc_otg [ 3.051619] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514 [ 3.053742] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.056293] hub 1-1.1:1.0: USB hub found [ 3.058365] hub 1-1.1:1.0: 3 ports detected [ 3.151420] usb 1-1.2: new high-speed USB device number 5 using dwc_otg [ 3.362279] usb 1-1.2: New USB device found, idVendor=1058, idProduct=25a2 [ 3.364376] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.366494] usb 1-1.2: Product: Elements 25A2 [ 3.368652] usb 1-1.2: Manufacturer: Western Digital [ 3.370884] usb 1-1.2: SerialNumber: 57585631413538304A4C3558 [ 3.373774] usb-storage 1-1.2:1.0: USB Mass Storage device detected [ 3.376594] scsi host0: usb-storage 1-1.2:1.0 [ 3.931414] usb 1-1.1.1: new high-speed USB device number 6 using dwc_otg [ 4.061761] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800 [ 4.064152] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.336884] libphy: lan78xx-mdiobus: probed [ 4.391984] scsi 0:0:0:0: Direct-Access WD Elements 25A2 1021 PQ: 0 ANSI: 6 [ 4.398672] sd 0:0:0:0: [sda] Spinning up disk... [ 5.431408] . [ 6.471408] . [ 7.511406] . [ 7.513791] ready [ 7.518228] sd 0:0:0:0: [sda] 3906963456 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 7.522986] sd 0:0:0:0: [sda] Write Protect is off [ 7.525279] sd 0:0:0:0: [sda] Mode Sense: 47 00 10 08 [ 7.525603] sd 0:0:0:0: [sda] No Caching mode page found [ 7.527835] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 7.563766] sda: sda1 [ 7.567598] sd 0:0:0:0: [sda] Attached SCSI disk [ 7.805899] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 7.808235] EXT4-fs (sda1): write access will be enabled during recovery [ 8.311464] Voltage normalised (0x00000000) [ 9.376310] random: crng init done [ 12.471465] Under-voltage detected! (0x00050005) [ 20.791468] Voltage normalised (0x00000000) [ 22.819313] EXT4-fs (sda1): recovery complete [ 22.829391] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 22.833632] VFS: Mounted root (ext4 filesystem) readonly on device 8:1. [ 22.901122] devtmpfs: mounted [ 22.906358] Freeing unused kernel memory: 1024K [ 23.850413] systemd[1]: System time before build time, advancing clock. [ 24.197935] NET: Registered protocol family 10 [ 24.201823] Segment Routing with IPv6 [ 24.247749] ip_tables: (C) 2000-2006 Netfilter Core Team [ 24.340583] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 24.349004] systemd[1]: Detected architecture arm. [ 24.398398] systemd[1]: Set hostname to . [ 24.632108] systemd-fstab-generator[79]: Failed to create mount unit file /run/systemd/generator/-.mount, as it already exists. Duplicate entry in /etc/fstab? [ 24.700117] systemd[78]: /lib/systemd/system-generators/systemd-fstab-generator failed with error code 1. [ 25.222016] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 25.231257] systemd[1]: Reached target Swap. [ 25.237663] systemd[1]: Listening on fsck to fsckd communication Socket. [ 25.244231] systemd[1]: Listening on Syslog Socket. [ 25.251256] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 25.261342] systemd[1]: Created slice System Slice. [ 34.057350] EXT4-fs (sda1): re-mounted. Opts: (null) [ 34.058712] EXT4-fs (sda1): re-mounted. Opts: (null) [ 34.156910] systemd-journald[100]: Received request to flush runtime journal from PID 1 [ 35.060665] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 35.066984] bcm2835_alsa bcm2835_alsa: card created with 8 channels [ 35.348754] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 35.538117] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 35.545112] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43455-sdio.bin for chip 0x004345(17221) rev 0x000006 [ 35.545971] usbcore: registered new interface driver brcmfmac [ 35.974418] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04 [ 35.975182] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 9.10.105 Compiler: 1.29.4 ClmImport: 1.36.3 Creation: 2018-03-09 18:56:28 [ 37.188682] uart-pl011 3f201000.serial: no DMA platform data [ 37.431590] Under-voltage detected! (0x00050005) [ 37.896748] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 37.896794] brcmfmac: power management disabled [ 37.966128] Adding 2097148k swap on /var/swap. Priority:-2 extents:5 across:2400252k FS [ 38.359809] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 41.258693] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 43.844643] Bluetooth: Core ver 2.22 [ 43.844723] NET: Registered protocol family 31 [ 43.844729] Bluetooth: HCI device and connection manager initialized [ 43.844749] Bluetooth: HCI socket layer initialized [ 43.844762] Bluetooth: L2CAP socket layer initialized [ 43.844793] Bluetooth: SCO socket layer initialized [ 43.859761] Bluetooth: HCI UART driver ver 2.3 [ 43.859775] Bluetooth: HCI UART protocol H4 registered [ 43.859781] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 43.860001] Bluetooth: HCI UART protocol Broadcom registered [ 44.106714] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 44.106734] Bluetooth: BNEP filters: protocol multicast [ 44.106764] Bluetooth: BNEP socket layer initialized [ 54.071475] Voltage normalised (0x00000000) [ 532.471230] rpi_firmware_get_throttled: 3 callbacks suppressed [ 532.471238] Under-voltage detected! (0x00050005) [ 538.711129] rpi_firmware_get_throttled: 3 callbacks suppressed [ 538.711135] Voltage normalised (0x00000000) [ 551.191140] Under-voltage detected! (0x00050005) [ 555.351127] Voltage normalised (0x00000000) [ 732.151059] Under-voltage detected! (0x00050005) [ 738.391010] Voltage normalised (0x00000000) [ 836.150977] Under-voltage detected! (0x00050005) [ 840.310944] Voltage normalised (0x00000000) [ 942.230905] Under-voltage detected! (0x00050005) [ 954.710861] Voltage normalised (0x00000000) [ 956.790898] Under-voltage detected! (0x00050005) [ 960.950848] Voltage normalised (0x00000000) [ 1173.111419] rpi_firmware_get_throttled: 1 callbacks suppressed [ 1173.111423] Voltage normalised (0x00000000) [ 1175.191508] rpi_firmware_get_throttled: 2 callbacks suppressed [ 1175.191515] Under-voltage detected! (0x00050005) [ 1179.351470] Voltage normalised (0x00000000) [ 1181.431496] Under-voltage detected! (0x00050005) [ 1189.751502] Voltage normalised (0x00000000) [ 1191.831543] Under-voltage detected! (0x00050005) [ 1497.592757] rpi_firmware_get_throttled: 13 callbacks suppressed [ 1497.592761] Voltage normalised (0x00000000) [ 1499.672383] rpi_firmware_get_throttled: 13 callbacks suppressed [ 1499.672391] Under-voltage detected! (0x00050005) [ 1507.992309] Voltage normalised (0x00000000) [ 1510.072380] Under-voltage detected! (0x00050005) [ 1520.472329] Voltage normalised (0x00000000) [ 1524.632388] Under-voltage detected! (0x00050005) [ 1807.512556] rpi_firmware_get_throttled: 17 callbacks suppressed [ 1807.512560] Voltage normalised (0x00000000) [ 1811.672628] rpi_firmware_get_throttled: 17 callbacks suppressed [ 1811.672636] Under-voltage detected! (0x00050005) [ 1822.072571] Voltage normalised (0x00000000) [ 1824.152578] Under-voltage detected! (0x00050005) [ 1832.472521] Voltage normalised (0x00000000) [ 1838.712625] Under-voltage detected! (0x00050005) [ 2113.272715] rpi_firmware_get_throttled: 22 callbacks suppressed [ 2113.272719] Voltage normalised (0x00000000) [ 2117.432729] rpi_firmware_get_throttled: 22 callbacks suppressed [ 2117.432736] Under-voltage detected! (0x00050005) [ 2123.672749] Voltage normalised (0x00000000) [ 2129.912809] Under-voltage detected! (0x00050005) [ 2134.072718] Voltage normalised (0x00000000) [ 2138.232812] Under-voltage detected! (0x00050005) [ 2419.033072] rpi_firmware_get_throttled: 19 callbacks suppressed [ 2419.033076] Voltage normalised (0x00000000) [ 2421.113212] rpi_firmware_get_throttled: 19 callbacks suppressed [ 2421.113236] Under-voltage detected! (0x00050005) [ 2431.513076] Voltage normalised (0x00000000) [ 2433.593132] Under-voltage detected! (0x00050005) [ 2450.233102] Voltage normalised (0x00000000) [ 2452.313199] Under-voltage detected! (0x00050005) [ 2720.633326] rpi_firmware_get_throttled: 16 callbacks suppressed [ 2720.633331] Voltage normalised (0x00000000) [ 2724.793393] rpi_firmware_get_throttled: 16 callbacks suppressed [ 2724.793401] Under-voltage detected! (0x00050005) [ 2739.353341] Voltage normalised (0x00000000) [ 2741.433321] Under-voltage detected! (0x00050005) [ 2745.593312] Voltage normalised (0x00000000) [ 2751.833430] Under-voltage detected! (0x00050005) [ 3038.873532] rpi_firmware_get_throttled: 14 callbacks suppressed [ 3038.873540] Under-voltage detected! (0x00050005) [ 3051.353506] rpi_firmware_get_throttled: 15 callbacks suppressed [ 3051.353511] Voltage normalised (0x00000000) [ 3053.433501] Under-voltage detected! (0x00050005) [ 3057.593503] Voltage normalised (0x00000000) [ 3059.673568] Under-voltage detected! (0x00050005) [ 3063.833478] Voltage normalised (0x00000000) [ 3342.553659] rpi_firmware_get_throttled: 16 callbacks suppressed [ 3342.553666] Under-voltage detected! (0x00050005) [ 3350.873690] Under-voltage detected! (0x00050005) [ 3357.113641] rpi_firmware_get_throttled: 17 callbacks suppressed [ 3357.113645] Voltage normalised (0x00000000) [ 3359.193713] Under-voltage detected! (0x00050005) [ 3365.433630] Voltage normalised (0x00000000) [ 3384.153700] Voltage normalised (0x00000000) [ 3644.153771] rpi_firmware_get_throttled: 18 callbacks suppressed [ 3644.153777] Under-voltage detected! (0x00050005) [ 3691.993807] rpi_firmware_get_throttled: 17 callbacks suppressed [ 3691.993812] Voltage normalised (0x00000000) [ 3694.073881] Under-voltage detected! (0x00050005) [ 3700.313804] Voltage normalised (0x00000000) [ 3708.633814] Under-voltage detected! (0x00050005) [ 3712.793778] Voltage normalised (0x00000000) [ 3970.714044] rpi_firmware_get_throttled: 9 callbacks suppressed [ 3970.714054] Under-voltage detected! (0x00050005) [ 4035.193989] rpi_firmware_get_throttled: 9 callbacks suppressed [ 4035.193996] Voltage normalised (0x00000000) [ 4039.354014] Under-voltage detected! (0x00050005) [ 4051.833897] Voltage normalised (0x00000000) [ 4055.993941] Under-voltage detected! (0x00050005) [ 4083.033934] Voltage normalised (0x00000000) [ 4272.314256] rpi_firmware_get_throttled: 10 callbacks suppressed [ 4272.314264] Under-voltage detected! (0x00050005) [ 4282.714330] Under-voltage detected! (0x00050005) [ 4297.274287] Under-voltage detected! (0x00050005) [ 4343.034372] rpi_firmware_get_throttled: 13 callbacks suppressed [ 4343.034378] Voltage normalised (0x00000000) [ 4351.354364] Voltage normalised (0x00000000) [ 4401.274457] Voltage normalised (0x00000000) [ 4575.994745] rpi_firmware_get_throttled: 9 callbacks suppressed [ 4575.994752] Under-voltage detected! (0x00050005) [ 4592.634851] Under-voltage detected! (0x00050005) [ 4652.954878] Under-voltage detected! (0x00050005) [ 4657.114828] rpi_firmware_get_throttled: 8 callbacks suppressed [ 4657.114833] Voltage normalised (0x00000000) [ 4707.034902] Voltage normalised (0x00000000) [ 4725.754976] Voltage normalised (0x00000000) [ 4912.955226] rpi_firmware_get_throttled: 7 callbacks suppressed [ 4912.955235] Under-voltage detected! (0x00050005) [ 4927.515139] Under-voltage detected! (0x00050005) [ 4973.275256] Under-voltage detected! (0x00050005) [ 4977.435297] rpi_firmware_get_throttled: 7 callbacks suppressed [ 4977.435305] Voltage normalised (0x00000000) [ 4987.835235] Voltage normalised (0x00000000) [ 5052.315254] Voltage normalised (0x00000000) [ 5233.275478] rpi_firmware_get_throttled: 8 callbacks suppressed [ 5233.275485] Under-voltage detected! (0x00050005) [ 5254.075495] Under-voltage detected! (0x00050005) [ 5316.475501] Under-voltage detected! (0x00050005) [ 5326.875501] rpi_firmware_get_throttled: 8 callbacks suppressed [ 5326.875506] Voltage normalised (0x00000000) [ 5358.075526] Voltage normalised (0x00000000) [ 5376.795553] Voltage normalised (0x00000000) [ 5545.275745] rpi_firmware_get_throttled: 6 callbacks suppressed [ 5545.275752] Under-voltage detected! (0x00050005) [ 5578.555784] Under-voltage detected! (0x00050005) [ 5651.355813] Under-voltage detected! (0x00050005) [ 5655.515873] rpi_firmware_get_throttled: 6 callbacks suppressed [ 5655.515879] Voltage normalised (0x00000000) [ 5711.675797] Voltage normalised (0x00000000) [ 5724.156423] Voltage normalised (0x00000000) [ 5855.195913] rpi_firmware_get_throttled: 5 callbacks suppressed [ 5855.195920] Under-voltage detected! (0x00050005) [ 5907.195943] Under-voltage detected! (0x00050005) [ 5915.515949] Under-voltage detected! (0x00050005) [ 5973.755999] rpi_firmware_get_throttled: 7 callbacks suppressed [ 5973.756005] Voltage normalised (0x00000000) [ 5979.996007] Voltage normalised (0x00000000) [ 5988.316050] Voltage normalised (0x00000000) [ 6175.516153] rpi_firmware_get_throttled: 11 callbacks suppressed [ 6175.516172] Under-voltage detected! (0x00050005) [ 6198.396154] Under-voltage detected! (0x00050005) [ 6225.436169] Under-voltage detected! (0x00050005) [ 6277.436199] rpi_firmware_get_throttled: 11 callbacks suppressed [ 6277.436205] Voltage normalised (0x00000000) [ 6300.316212] Voltage normalised (0x00000000) [ 6319.036232] Voltage normalised (0x00000000) [ 6481.276348] rpi_firmware_get_throttled: 13 callbacks suppressed [ 6481.276355] Under-voltage detected! (0x00050005) [ 6518.716431] Under-voltage detected! (0x00050005) [ 6533.276379] Under-voltage detected! (0x00050005) [ 6616.476425] rpi_firmware_get_throttled: 13 callbacks suppressed [ 6616.476432] Voltage normalised (0x00000000) [ 6639.356439] Voltage normalised (0x00000000) [ 6649.756419] Voltage normalised (0x00000000) [ 6795.356578] rpi_firmware_get_throttled: 11 callbacks suppressed [ 6795.356585] Under-voltage detected! (0x00050005) [ 6801.596699] Under-voltage detected! (0x00050005) [ 6818.236626] Under-voltage detected! (0x00050005) [ 6945.116653] rpi_firmware_get_throttled: 15 callbacks suppressed [ 6945.116660] Voltage normalised (0x00000000) [ 6965.916668] Voltage normalised (0x00000000) [ 6982.556685] Voltage normalised (0x00000000) [ 7123.996791] rpi_firmware_get_throttled: 13 callbacks suppressed [ 7123.996799] Under-voltage detected! (0x00050005) [ 7182.236828] Under-voltage detected! (0x00050005) [ 7209.276835] Under-voltage detected! (0x00050005) [ 7267.516971] rpi_firmware_get_throttled: 10 callbacks suppressed [ 7267.516977] Voltage normalised (0x00000000) [ 7273.756966] Voltage normalised (0x00000000) [ 7331.997191] Voltage normalised (0x00000000) [ 7431.837354] rpi_firmware_get_throttled: 8 callbacks suppressed [ 7431.837361] Under-voltage detected! (0x00050005) [ 7442.237353] Under-voltage detected! (0x00050005) [ 7506.717492] Under-voltage detected! (0x00050005) [ 7583.678462] rpi_firmware_get_throttled: 6 callbacks suppressed [ 7583.678468] Voltage normalised (0x00000000) [ 7654.397768] Voltage normalised (0x00000000) [ 7718.877810] Voltage normalised (0x00000000) [ 7733.437855] rpi_firmware_get_throttled: 4 callbacks suppressed [ 7733.437861] Under-voltage detected! (0x00050005) [ 7750.077867] Under-voltage detected! (0x00050005) [ 7802.077992] Under-voltage detected! (0x00050005) [ 7960.158147] rpi_firmware_get_throttled: 6 callbacks suppressed [ 7960.158153] Voltage normalised (0x00000000) [ 7972.638182] Voltage normalised (0x00000000) [ 8003.838220] Voltage normalised (0x00000000) [ 8097.438344] rpi_firmware_get_throttled: 6 callbacks suppressed [ 8097.438351] Under-voltage detected! (0x00050005) [ 8124.478405] Under-voltage detected! (0x00050005) [ 8147.358412] Under-voltage detected! (0x00050005) [ 8274.238565] rpi_firmware_get_throttled: 8 callbacks suppressed [ 8274.238572] Voltage normalised (0x00000000) [ 8290.878570] Voltage normalised (0x00000000) [ 8301.278573] Voltage normalised (0x00000000) [ 8423.998745] rpi_firmware_get_throttled: 13 callbacks suppressed [ 8423.998753] Under-voltage detected! (0x00050005) [ 8444.798736] Under-voltage detected! (0x00050005) [ 8513.438824] Under-voltage detected! (0x00050005) [ 8575.838805] rpi_firmware_get_throttled: 9 callbacks suppressed [ 8575.838808] Voltage normalised (0x00000000) [ 8598.718892] Voltage normalised (0x00000000) [ 8640.318915] Voltage normalised (0x00000000) [ 8725.599059] rpi_firmware_get_throttled: 7 callbacks suppressed [ 8725.599066] Under-voltage detected! (0x00050005) [ 8742.239104] Under-voltage detected! (0x00050005) [ 8802.559120] Under-voltage detected! (0x00050005) [ 8966.879301] rpi_firmware_get_throttled: 7 callbacks suppressed [ 8966.879307] Voltage normalised (0x00000000) [ 8973.119240] Voltage normalised (0x00000000) [ 8983.519254] Voltage normalised (0x00000000) [ 9027.199308] rpi_firmware_get_throttled: 6 callbacks suppressed [ 9027.199315] Under-voltage detected! (0x00050005) [ 9060.479345] Under-voltage detected! (0x00050005) [ 9068.799345] Under-voltage detected! (0x00050005) [ 9272.639537] rpi_firmware_get_throttled: 14 callbacks suppressed [ 9272.639556] Voltage normalised (0x00000000) [ 9318.399606] Voltage normalised (0x00000000) [ 9411.999670] rpi_firmware_get_throttled: 10 callbacks suppressed [ 9411.999690] Under-voltage detected! (0x00050005) [ 9422.399691] Voltage normalised (0x00000000) [ 9466.079747] Under-voltage detected! (0x00050005) [ 9476.479812] Under-voltage detected! (0x00050005) [ 9580.479825] rpi_firmware_get_throttled: 7 callbacks suppressed [ 9580.479831] Voltage normalised (0x00000000) [ 9622.079867] Voltage normalised (0x00000000) [ 9647.039894] Voltage normalised (0x00000000) [ 9715.679970] rpi_firmware_get_throttled: 10 callbacks suppressed [ 9715.679978] Under-voltage detected! (0x00050005) [ 9734.400003] Under-voltage detected! (0x00050005) [ 9767.680019] Under-voltage detected! (0x00050005) [ 9904.960161] rpi_firmware_get_throttled: 8 callbacks suppressed [ 9904.960166] Voltage normalised (0x00000000) [ 9915.360135] Voltage normalised (0x00000000) [ 9921.600159] Voltage normalised (0x00000000) [10073.440295] rpi_firmware_get_throttled: 8 callbacks suppressed [10073.440302] Under-voltage detected! (0x00050005) [10092.160368] Under-voltage detected! (0x00050005) [10100.480319] Under-voltage detected! (0x00050005) [10231.520431] rpi_firmware_get_throttled: 10 callbacks suppressed [10231.520437] Voltage normalised (0x00000000) [10246.080449] Voltage normalised (0x00000000) [10296.000494] Voltage normalised (0x00000000) [10385.440588] rpi_firmware_get_throttled: 10 callbacks suppressed [10385.440596] Under-voltage detected! (0x00050005) [10395.840576] Under-voltage detected! (0x00050005) [10435.360629] Under-voltage detected! (0x00050005) [10535.200669] rpi_firmware_get_throttled: 8 callbacks suppressed [10535.200687] Voltage normalised (0x00000000) [10553.920728] Voltage normalised (0x00000000) [10562.240689] Voltage normalised (0x00000000) [10693.280824] rpi_firmware_get_throttled: 11 callbacks suppressed [10693.280832] Under-voltage detected! (0x00050005) [10718.240841] Under-voltage detected! (0x00050005) [10730.720853] Under-voltage detected! (0x00050005) [10845.120943] rpi_firmware_get_throttled: 10 callbacks suppressed [10845.120949] Voltage normalised (0x00000000) [10868.000980] Voltage normalised (0x00000000) [10890.880983] Voltage normalised (0x00000000) [11009.441087] rpi_firmware_get_throttled: 8 callbacks suppressed [11009.441093] Under-voltage detected! (0x00050005) [11032.321145] Under-voltage detected! (0x00050005) [11092.641179] Under-voltage detected! (0x00050005) [11163.361213] rpi_firmware_get_throttled: 8 callbacks suppressed [11163.361219] Voltage normalised (0x00000000) [11194.561241] Voltage normalised (0x00000000) [11207.041252] Voltage normalised (0x00000000) [11321.441545] rpi_firmware_get_throttled: 10 callbacks suppressed [11321.441565] Under-voltage detected! (0x00050005) [11363.041424] Under-voltage detected! (0x00050005) [11379.681403] Under-voltage detected! (0x00050005) [11498.241539] rpi_firmware_get_throttled: 10 callbacks suppressed [11498.241545] Voltage normalised (0x00000000) [11548.161573] Voltage normalised (0x00000000) [11566.881577] Voltage normalised (0x00000000) [11627.201716] rpi_firmware_get_throttled: 7 callbacks suppressed [11627.201725] Under-voltage detected! (0x00050005) [11635.521638] Under-voltage detected! (0x00050005) [11670.881663] Under-voltage detected! (0x00050005) [11849.761837] rpi_firmware_get_throttled: 10 callbacks suppressed [11849.761843] Voltage normalised (0x00000000) [11866.401838] Voltage normalised (0x00000000) [11880.961861] Voltage normalised (0x00000000) [11941.281977] rpi_firmware_get_throttled: 10 callbacks suppressed [11941.281985] Under-voltage detected! (0x00050005) [12007.841964] Under-voltage detected! (0x00050005) [12018.241983] Under-voltage detected! (0x00050005) [12190.882128] rpi_firmware_get_throttled: 10 callbacks suppressed [12190.882134] Voltage normalised (0x00000000) [12207.522158] Voltage normalised (0x00000000) [12220.002171] Voltage normalised (0x00000000) [12251.202203] rpi_firmware_get_throttled: 9 callbacks suppressed [12251.202210] Under-voltage detected! (0x00050005) [12263.682202] Under-voltage detected! (0x00050005) [12296.962219] Under-voltage detected! (0x00050005) [12519.522436] rpi_firmware_get_throttled: 10 callbacks suppressed [12519.522442] Voltage normalised (0x00000000) [12532.002450] Voltage normalised (0x00000000) [12579.842583] rpi_firmware_get_throttled: 8 callbacks suppressed [12579.842591] Under-voltage detected! (0x00050005) [12590.242496] Voltage normalised (0x00000000) [12608.962513] Under-voltage detected! (0x00050005) [12658.882559] Under-voltage detected! (0x00050005) [12827.362713] rpi_firmware_get_throttled: 7 callbacks suppressed [12827.362720] Voltage normalised (0x00000000) [12846.082740] Voltage normalised (0x00000000) [12860.642751] Voltage normalised (0x00000000) [12883.522764] rpi_firmware_get_throttled: 8 callbacks suppressed [12883.522770] Under-voltage detected! (0x00050005) [12900.162819] Under-voltage detected! (0x00050005) [12914.722897] Under-voltage detected! (0x00050005) [13137.282987] rpi_firmware_get_throttled: 15 callbacks suppressed [13137.282993] Voltage normalised (0x00000000) [13147.682999] Voltage normalised (0x00000000) [13164.323012] Voltage normalised (0x00000000) [13208.003051] rpi_firmware_get_throttled: 17 callbacks suppressed [13208.003058] Under-voltage detected! (0x00050005) [13222.563069] Under-voltage detected! (0x00050005) [13251.683127] Under-voltage detected! (0x00050005) [13443.043238] rpi_firmware_get_throttled: 11 callbacks suppressed [13443.043243] Voltage normalised (0x00000000) [13459.683223] Voltage normalised (0x00000000) [13480.483232] Voltage normalised (0x00000000) [13530.403365] rpi_firmware_get_throttled: 10 callbacks suppressed [13530.403372] Under-voltage detected! (0x00050005) [13567.843331] Under-voltage detected! (0x00050005) [13584.483299] Under-voltage detected! (0x00050005) [13759.203396] rpi_firmware_get_throttled: 10 callbacks suppressed [13759.203400] Voltage normalised (0x00000000) [13777.923391] Voltage normalised (0x00000000) [13834.083546] rpi_firmware_get_throttled: 8 callbacks suppressed [13834.083553] Under-voltage detected! (0x00050005) [13852.803471] Voltage normalised (0x00000000) [13873.603467] Under-voltage detected! (0x00050005) [13884.003498] Under-voltage detected! (0x00050005) [14075.363681] rpi_firmware_get_throttled: 11 callbacks suppressed [14075.363701] Voltage normalised (0x00000000) [14087.843576] Voltage normalised (0x00000000) [14106.563646] Voltage normalised (0x00000000) [14179.363677] rpi_firmware_get_throttled: 13 callbacks suppressed [14179.363698] Under-voltage detected! (0x00050005) [14200.163790] Under-voltage detected! (0x00050005) [14218.883874] Under-voltage detected! (0x00050005) [14397.763862] rpi_firmware_get_throttled: 14 callbacks suppressed [14397.763868] Voltage normalised (0x00000000) [14422.723885] Voltage normalised (0x00000000) [14431.043884] Voltage normalised (0x00000000) [14495.523940] rpi_firmware_get_throttled: 17 callbacks suppressed [14495.523947] Under-voltage detected! (0x00050005) [14514.243989] Under-voltage detected! (0x00050005) [14543.364028] Under-voltage detected! (0x00050005) [14707.684093] rpi_firmware_get_throttled: 19 callbacks suppressed [14707.684098] Voltage normalised (0x00000000) [14722.244117] Voltage normalised (0x00000000) [14734.724130] Voltage normalised (0x00000000) [14799.204156] rpi_firmware_get_throttled: 20 callbacks suppressed [14799.204163] Under-voltage detected! (0x00050005) [14815.844153] Under-voltage detected! (0x00050005) [14828.324178] Under-voltage detected! (0x00050005) [24787.373946] rpi_firmware_get_throttled: 5 callbacks suppressed [24787.373953] Under-voltage detected! (0x00050005) [24799.853955] rpi_firmware_get_throttled: 13 callbacks suppressed [24799.853960] Voltage normalised (0x00000000) [25041.134137] Under-voltage detected! (0x00050005) [25047.374130] Voltage normalised (0x00000000) [25059.854152] Under-voltage detected! (0x00050005) [25066.094156] Voltage normalised (0x00000000) [27231.376636] Under-voltage detected! (0x00050005) [27241.776628] Voltage normalised (0x00000000) [27264.656670] Under-voltage detected! (0x00050005) [27268.816667] Voltage normalised (0x00000000) [28930.738253] Under-voltage detected! (0x00050005) [28934.898255] Voltage normalised (0x00000000) [29305.138638] Under-voltage detected! (0x00050005) [29309.298948] Voltage normalised (0x00000000) [30652.979724] Under-voltage detected! (0x00050005) [30659.219728] Voltage normalised (0x00000000) [30665.460114] Under-voltage detected! (0x00050005) [30673.779736] Voltage normalised (0x00000000) [30675.859759] Under-voltage detected! (0x00050005) [30696.659773] Voltage normalised (0x00000000) pi@xmrpi:~ $

dawiepoolman commented 6 years ago

Maybe the RPi is too weak to power the 2TB ext hdd?

dawiepoolman commented 6 years ago

I have an output of 5V 3A Power supply

dawiepoolman commented 6 years ago

Should I consider getting a SSD HD instead? They are probably more power efficient

dawiepoolman commented 6 years ago

Ok, so I ordered a powered USB hub after checking out some Raspberry Pi forums. Lets see if some more external power solves the reliability issue of the HDD.
I will keep this issue updated on my progress so that other Pi node operators can learn from my potholes.

dawiepoolman commented 6 years ago

So I think we cracked this one on reddit.. seemed like we should set max_usb_current=1 in boot config file to ensure enough current gets supplied to the HDD

Still syncing stable now..

moneromooo-monero commented 6 years ago

Very good find :)

dawiepoolman commented 6 years ago

Kudos to reddit user u/shermand100 for amazing perseverance and patience with an unusual symptoms and to @glv2 for the dmesg suggestion.
It all culminated into a very good learning. And to you @moneromooo-monero for always being involved and helping out too. My learning curve has exploded since I started following your work.

moneromooo-monero commented 6 years ago

Can you give a command that adds that setting to the boot file (ie, echo "max_usb_current=1" >> /etc/someconfig") which I can add to the README ?

hyc commented 6 years ago

I never even knew that was possible. Can't imagine it's good for the longevity of the Pi. Simple low-tech solution is just to get a USB Y-cable, and plug an external USB power supply in to give the drive enough juice.

dawiepoolman commented 6 years ago

@moneromooo-monero I ran command:

sudo nano /boot/config.txt

and then I added the setting to the config file:

max_usb_current=1

@hyc we discussed the Y splitter cable and powered usb hub alternatives as well on r/pinode TL;DR; the Y cable is not ideal and now not even the extra powered usb hub is really needed anymore it seems.

The pi is now running stable for a day already at temp=68.8'C which is below the max threshold of 80'C even without an extra cooling fan which I think is badass :P

moneromooo-monero commented 6 years ago

Thanks, it's now in https://github.com/monero-project/monero/pull/4553

hyc commented 6 years ago

Relying on the Pi to supply enough power by itself is a mistake. If there's extra CPU or network activity, it won't have enough juice for your HDD.

dawiepoolman commented 6 years ago

Since my last post I received the powered usb hub. I will plug that into the Pi for at least the period of catching up the initial sync. It can only help carry the load indeed.

monero-project / monero

RPi3B+ monerod errors #4507

0 0x0093ed64 in mdb_midl_xmerge ()

1 0x00938ee6 in mdb_page_alloc.isra ()

2 0x0093a430 in mdb_page_new ()

3 0x0093a634 in mdb_node_add ()

4 0x0093cb68 in mdb_cursor_put ()

5 0x007c8640 in cryptonote::BlockchainLMDB::add_txpool_tx(cryptonote::transaction const&, cryptonote::txpool_tx_meta_t const&) ()

6 0x008124e4 in cryptonote::tx_memory_pool::add_tx(cryptonote::transaction&, crypto::hash const&, unsigned int, cryptonote::tx_verification_context&, bool, bool, bool, unsigned char) ()

7 0x008039aa in cryptonote::core::add_new_tx(cryptonote::transaction&, crypto::hash const&, crypto::hash const&, unsigned int, cryptonote::tx_verification_context&, bool, bool, bool) ()

9 0x007a4374 in cryptonote::t_cryptonote_protocol_handler::try_add_next_blocks(cryptonote::cryptonote_connection_context&) ()

10 0x007a62de in cryptonote::t_cryptonote_protocol_handler::handle_response_get_objects(int, cryptonote::NOTIFY_RESPONSE_GET_OBJECTS::request&, cryptonote::cryptonote_connection_context&) ()

12 0x006b82f4 in int cryptonote::t_cryptonote_protocol_handler::handle_invoke_map(bool, int, std::cxx11::basic_string<char, std::char_traits, std::allocator > const&, std::cxx11::basic_string<char, std::char_traits, std::allocator >&, cryptonote::cryptonote_connection_context&, bool&) ()

14 0x006b8732 in nodetool::node_server<cryptonote::t_cryptonote_protocol_handler >::notify(int, std::__cxx11::basic_string<char, std::char_traits, std::allocator > const&, nodetool::p2p_connection_context_t&) ()

15 0x007b0890 in epee::levin::async_protocol_handler<nodetool::p2p_connection_context_t >::handle_recv(void const*, unsigned int) ()

16 0x007bea76 in epee::net_utils::connection<epee::levin::async_protocol_handler<nodetool::p2p_connection_context_t > >::handle_read(boost::system::error_code const&, unsigned int) ()

21 0x006e3276 in boost::asio::detail::epoll_reactor::descriptor_state::do_complete(void, boost::asio::detail::scheduler_operation, boost::system::error_code const&, unsigned int) ()

22 0x00678e16 in boost::asio::detail::scheduler::run(boost::system::error_code&) ()

23 0x0078c770 in epee::net_utils::boosted_tcp_server<epee::levin::async_protocol_handler<nodetool::p2p_connection_context_t > >::worker_thread() ()

24 0x00a86f8c in thread_proxy ()

25 0x76ef8fc4 in start_thread (arg=0x667ff450) at pthread_create.c:335

26 0x76e84bc8 in ?? () at ../sysdeps/unix/sysv/linux/arm/clone.S:76 from /lib/arm-linux-gnueabihf/libc.so.6

0 0x009368b0 in mdb_rpage_get ()

1 0x00937f92 in mdb_page_get.isra ()

2 0x009392ce in mdb_page_search_root ()

3 0x0093952c in mdb_page_search ()

4 0x00939970 in mdb_cursor_set ()

5 0x009389e2 in mdb_cursor_get ()

6 0x007d7eb8 in cryptonote::BlockchainLMDB::get_block_blob_from_height[abi:cxx11](unsigned long long const&) const ()

7 0x007c0484 in cryptonote::BlockchainDB::get_block_from_height(unsigned long long const&) const ()

8 0x0095976a in cryptonote::HardFork::rescan_from_block_height(unsigned long long) ()

9 0x0095a758 in cryptonote::HardFork::init() ()

10 0x007f89fe in cryptonote::Blockchain::init(cryptonote::BlockchainDB, cryptonote::network_type, bool, cryptonote::test_options const) ()

11 0x00809f0e in cryptonote::core::init(boost::program_options::variables_map const&, char const, cryptonote::test_options const) ()

12 0x00681d08 in daemonize::t_core::run() ()

13 0x0066f760 in daemonize::t_daemon::run(bool) ()

14 0x006cda74 in daemonize::t_executor::run_interactive(boost::program_options::variables_map const&) ()

15 0x006d1b46 in bool daemonizer::daemonize(int, char const**, daemonize::t_executor&&, boost::program_options::variables_map const&) ()

16 0x00652e66 in main ()