Closed atomtoto closed 3 months ago
by plugging it in/unplugging it
Are you still using the usb flash adapter? It could be possible happen that the adapter boot it in the flash mode. Try to boot it with the regular power system 230V (or what you need).
by plugging it in/unplugging it
Are you still using the usb flash adapter? It could be possible happen that the adapter boot it in the flash mode. Try to boot it with the regular power system 230V (or what you need).
Unfortunately it doesn’t work either (that I power it separately or from the adapter, moreover it is no longer in flash mode)
Can you read the logout on the TX/RX interface during and after the boot und post it here.
Can you read the logout on the TX/RX interface during and after the boot und post it here.
Do you know a way to do that on macOS? Thanks!
The most tools that can flash a shelly, also can read the TX/RX. You can use the mos cli tool or espflash.
This issue is stale because it has been open 3 weeks with no activity. Comment or this will be closed in 1 week.
This issue has now been closed, as no update was provided after it was marked stale. Feel free to provide updates to reopen this issue.
I tried to install the homekit firmware on my shelly 1 by flashing it with a usb adapter. The installation works, the flash ends completely, but when I reboot my shelly (by plugging it in/unplugging it), it does not appear in the list of available wifi. What can I do?