search

mongoose-os-apps / shelly-homekit

Apple HomeKit firmware for Shelly's
Other
1.83k stars 130 forks source link

Momentary Switch with Shelly Plus 1 #1429

Closed johnmrichey closed 1 month ago

johnmrichey commented 3 months ago

I have the Shelly HomeKit setup as Momentary switch but when I get the contacts across the dry contacts of 0|I it's not acting as a momentary switch.

I have tried all the various combinations but it seems to be always the same regardless.

Any suggestions please. image

johnmrichey commented 3 months ago

I posted this to the Shelly forum as it seems this is an issue with stock 1.4.0 as well in my testing.

Shelly Plus 1 as Momentary Switch https://community.shelly.cloud/topic/1870-shelly-plus-1-as-momentary-switch/

Sternsoldat commented 3 months ago

HeyCan you explain what exactly happen with you O|I contact?-send from my mobile device-Am 04.08.2024 um 02:15 schrieb johnmrichey @.***>: I have the Shelly HomeKit setup as Momentary switch but when I get the contacts across the dry contacts of 0|I it's not acting as a momentary switch. I have tried all the various combinations but it seems to be always the same regardless. Any suggestions please. 31760082-ED0C-4298-8F53-5814634BBB71.png (view on web)

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you are subscribed to this thread.Message ID: @.***>

johnmrichey commented 3 months ago

As a momentary switch which is normally open it should be open when you release the button. When I use Garage Door type that behaves correctly and return to the open state but it forces the HAP type to Garage Door in HomeKit.

When I use Switch type Momentary the dry contacts toggle to closed and stay in the closed position, not until you press the button again do it then open.

johnmrichey commented 3 months ago

The voltmeter across the contacts when pressed indicates continuity and stays that way until you press the button again.

johnmrichey commented 3 months ago

You just need to turn on Auto Off and it works fine.

Problem solved.

johnmrichey commented 3 months ago

Auto Off does not make it work properly as an actual momentary switch. Any ideas how to make this work as normally open actual momentary switch please?

github-actions[bot] commented 2 months ago

This issue is stale because it has been open 3 weeks with no activity. Comment or this will be closed in 1 week.

github-actions[bot] commented 2 months ago

This issue has now been closed, as no update was provided after it was marked stale. Feel free to provide updates to reopen this issue.

markirb commented 2 months ago

Can you please add more detail why auto off does not work? It should be exactly what you need

dmarthur commented 2 months ago

@johnmrichey - I was having this same problem even after I activated the auto-off feature. I disconnected the live wire to the relay, waited 10 seconds, and reconnected it. That fixed the problem for me. My settings for that relay are shown below.

Screenshot 2024-09-15 at 5 02 46 PM
github-actions[bot] commented 1 month ago

This issue is stale because it has been open 3 weeks with no activity. Comment or this will be closed in 1 week.