For which tools is the KillerBee firmware required?

[GoogleCodeExporter]

For which tools is the KillerBee firmware required? And for which can I use the 
RZUSB firmware? 
The only tool that is working with the original firmware is zbid. zbfind and 
zbdump fail. zbfind fails when assigning the channel number and zbdump fails as 
reported in issue 1, which seems also to be related to setting the channel.

According to the slides passive operations should work with the original 
firmware: "Default RZUSB firmware accommodates 802.15.4 sniffing, End Device, 
PAN Coordinator"

Thanks,
Markus

Original issue reported on code.google.com by markus.c...@gmail.com on 1 Jun 2011 at 9:02

[GoogleCodeExporter]

Yes, all should work in passive sniffing, which includes setting the channel, 
etc, using the default factory RZUSBSTICK firmware.

In issue 1, it seems to be a timing issue due to something odd with the USB 
bus. Contact me via email and we'll try to fix this, and then commit that 
change to the main repository. I'm unable to recreate this condition myself, 
despite many tries.

Thanks!

Original comment by rmspe...@gmail.com on 8 Jun 2011 at 2:32

[GoogleCodeExporter]

Thanks, I am currently busy with other things. I will send you an email as soon 
as I continue working with the RZUSBSTICK. You are right, it seems that it is 
related to issue 1. The problem is caused by the "No error" status message.

Original comment by markus.c...@gmail.com on 9 Jun 2011 at 7:00

[GoogleCodeExporter]

Markus, what is the status of this issue? Email me if I can help, else I want 
to mark how this was fixed for you.

Just as a note, when a function is run (ex inject, change channel, etc), the 
KillerBee framework does a check to see if it thinks that operation is 
supported on the specific device it is trying to execute on. If that is not 
marked as supported by the hardware, an error will throw before it tries to 
execute it.

Original comment by rmspe...@gmail.com on 13 Aug 2011 at 1:43

• Changed state: Accepted

[GoogleCodeExporter]

Closed as no further feedback from users. Will reopen if needed.

Original comment by rmspe...@gmail.com on 15 Nov 2011 at 12:02

• Changed state: Done

[GoogleCodeExporter]

Hello,

I'm having the same issue Markus had: tried both the new trunk code and the 
killerbee-1.0 release but no luck...by the way, I'm also with the original 
firmware for the RZUSBstick.

Any solutions so far?

Original comment by segar...@gmail.com on 6 Mar 2012 at 8:38