Some Helpful tips for 64bit users and chatpad config file for Portuguese Portugal Keyboards

for those using 64bit version you will have to follow this in order to work 
properly. i had to do it because it bugged other way (you really have to do in 
that order):

"TUTORIAL WORKS 100%!!! A user called Kenneth did this. Found it in the issue 
section!

JUST BEFORE DOING THIS... DELETE ALL THE DRIVERS MANUALLY IN THE DEVICE 
MANAGER... RIGHTMOUSE (DELETE DRIVER -> UNINSTALL? YES in the checkbox)

I HAD THE SAME PROBS AS YOU AND NOW IT'S WORKING!!!

KENNETH:
Heres what i did i was having the same problem and i solved it heres how. 1.I 
unplugged the controller 2.uninstalled all the chatpad drivers 3.plugged the 
controller in one of my pc's back usb ports 4.went to device manager and 
updated my normal controller drivers( if the controller updated the drivers 
automatically its best to check but you should be ok) 5.restart and do the f8 
driver check disable 6.install AMD64 chatpad drivers and wait for it to 
finish(if you get the pop ups asking about drivers click install anyway) 7.once 
the drivers have installed restart the pc and do the f8 disable again 8. now 
unplug the controller and plug it right back into the same usb port 9.run the 
normal win7 amd64 test 3.exe and the command prompt should open and stay open 
10.once the command prompt finishes it will be open so press a couple buttons 
to see if they light up this works 100% of the time for me although it took me 
awhile to figure it out also im on win7 64bit too if it doesnt work retrace 
your steps because i just typed this entire message from my chatpad hope this 
helps good luck"

if you already installed it and it doesnt work... you will have to do this

"JUST BEFORE DOING THIS... DELETE ALL THE DRIVERS MANUALLY IN THE DEVICE 
MANAGER... RIGHTMOUSE (DELETE DRIVER -> UNINSTALL? YES in the checkbox)" make 
sure you run the uninstaller that comes with the drivers too, then install it 
again with the order listed above

NOTE: any time you want to use the controller you will have to disable the 
signature drivers on F8 ALWAYS! otherwise the controller dont even switch on... 

if you dont want this anymore (because it might be boring to always start 
windows with F8 option, start uninstalling it the way above, then uninstall the 
original driver for the controller and reinstall it (do not forget to remove 
the virtual drivers on the device manager) and the controller should be fine 
again... hope this helps while the project is stopped and they dont have the 
signed drivers, and an easier installer..

anyway i want to thanks the creator of this, since microsoft itself didnt do 
it, i always wanted this because the chatpad for pc is too useful i can emulate 
the keys and play pc games easier with the chatpad as going msn while im on my 
bed ^^

it gave me problems before i followed the tutorial above, so if you didnt use 
it yet and want (if you have 64bit windows, follow it!)

________________________________

after some time working on the configuration file, ive made this one configured 
for portuguese-portugal keyboards... it was kinda troublesome since the name of 
the codes didnt match the keys, i had to type 1 by 1 to know which was from 
where... so in order to make it easier for portuguese people like me, im 
sharing it here!

http://ifile.it/m08dknf/chatpad_config_PTver.txt

NOTE: make sure you take off the "_PTver" part to make it work
Original issue reported on code.google.com by xboxlive...@gmail.com on 30 Jun 2012 at 1:02
Attachments:
chatpad_config_PTver.txt
monokulo / chatpad-super-driver

Some Helpful tips for 64bit users and chatpad config file for Portuguese Portugal Keyboards #39
