search

moode-player / docs

Project documentation
GNU General Public License v3.0
14 stars 5 forks source link

The browser shows 403 Forbidden -- nginx/1.18.0 after I follow the Development with Gulp 2.1 Back and front-end stuff #4

Open Jacob9Audio opened 1 year ago

Jacob9Audio commented 1 year ago

Hi I flash moodeaudio image 2023-01-20-moode-r825-lite.img on and follow the Development with Gulp 2.1 Back and front-end stuff. https://github.com/moode-player/docs/blob/main/development_with_gulp.md#21-back-and-front-end-stuff

Below is my board configuration: Linux: 5.15.84-v7+ #1613 | armv7l (32-bit) | DebOS: 11.6 Model: Pi-3B 1.2 1GB Audio: Pi HDMI 1

The instruction command I run on remote SSH as below: cd ~ sudo apt-get update sudo apt-get -y install npm git clone https://github.com/moode-player/moode.git cd moode npm ci node_modules/.bin/gulp build node_modules/.bin/gulp deploy --test sudo mv /var/www /var/www.org sudo node_modules/.bin/gulp deploy moodeutl -r

After browse the http://remoteIP/, the browser show 403 Forbidden -- nginx/1.18.0.

I tried to enable the log level to debug for Nginx, the log shows as below. [20-Jan-2023 16:09:48] NOTICE: fpm is running, pid 458 [20-Jan-2023 16:09:48] NOTICE: ready to handle connections [20-Jan-2023 16:09:48] NOTICE: systemd monitor interval set to 10000ms [06-Apr-2023 04:28:44] NOTICE: Terminating ... [06-Apr-2023 04:28:44] NOTICE: exiting, bye-bye! [06-Apr-2023 04:28:44] NOTICE: fpm is running, pid 6543 [06-Apr-2023 04:28:44] NOTICE: ready to handle connections [06-Apr-2023 04:28:44] NOTICE: systemd monitor interval set to 10000ms [06-Apr-2023 05:05:20] NOTICE: Terminating ... [06-Apr-2023 05:05:20] NOTICE: exiting, bye-bye! [06-Apr-2023 05:05:28.124285] DEBUG: pid 444, fpm_scoreboard_init_main(), line 38: got clock tick '100' [06-Apr-2023 05:05:28.126467] DEBUG: pid 444, fpm_signals_init_main(), line 221: Unblocking all signals [06-Apr-2023 05:05:28.126892] DEBUG: pid 444, fpm_event_init_main(), line 353: event module is epoll and 1 fds have been reserved [06-Apr-2023 05:05:28.127111] NOTICE: pid 444, fpm_init(), line 83: fpm is running, pid 444 [06-Apr-2023 05:05:28.127149] DEBUG: pid 444, fpm_children_make(), line 407: blocking signals before child birth [06-Apr-2023 05:05:28.129114] DEBUG: pid 444, fpm_children_make(), line 431: unblocking signals, child born [06-Apr-2023 05:05:28.129324] DEBUG: pid 444, fpm_children_make(), line 437: [pool www] child 486 started [06-Apr-2023 05:05:28.129372] DEBUG: pid 444, fpm_children_make(), line 407: blocking signals before child birth [06-Apr-2023 05:05:28.131511] DEBUG: pid 444, fpm_children_make(), line 431: unblocking signals, child born [06-Apr-2023 05:05:28.131749] DEBUG: pid 444, fpm_children_make(), line 437: [pool www] child 487 started [06-Apr-2023 05:05:28.131839] DEBUG: pid 444, fpm_event_loop(), line 382: 68196 bytes have been reserved in SHM [06-Apr-2023 05:05:28.131873] NOTICE: pid 444, fpm_event_loop(), line 383: ready to handle connections [06-Apr-2023 05:05:28.132229] DEBUG: pid 444, fpm_systemd_heartbeat(), line 68: have notify start to systemd [06-Apr-2023 05:05:28.132283] NOTICE: pid 444, fpm_systemd_heartbeat(), line 75: systemd monitor interval set to 10000ms [06-Apr-2023 05:05:29.133398] DEBUG: pid 444, fpm_pctl_perform_idle_server_maintenance(), line 382: [pool www] currently 0 active children, 2 spare children, 2 running children. Spawning rate 1 [06-Apr-2023 05:05:30.134574] DEBUG: pid 444, fpm_pctl_perform_idle_server_maintenance(), line 382: [pool www] currently 0 active children, 2 spare children, 2 running children. Spawning rate 1

Could you help to comment if any way I can enable more log or how to debug this problem?

Thanks.

Jacob

Jacob9Audio commented 1 year ago

Found there are missing files index.php and others, apl-config.php, bkp-config.php, blu-config.php, cdsp-config.php, chp-config.php, eqg-config.php, eqp-config.php, gpio-config.php, index.php, inp-config.php, lib-config.php... missing_files Keep working on why the deploy not working as expected.

Thanks.

Jacob

moodeaudio commented 1 year ago

The command node_modules/.bin/gulp deploy --test should create and populate a dir structure like below 

moose
  build
    dist
      cache
      develop
      var
        www

Copy moode/build/dist/var/www/* to the target /var/www dir

Jacob9Audio commented 1 year ago

Hi Tim, I have tried the copy works. Thanks for the help!!

Go deeper inside the glupfile.js. I found 

                  ...
                  // exclude generated content:
                  ,'!'+pkg.app.src+'/index.html'
                  ,'!'+pkg.app.src+'/templates/indextpl.min.html'
                  ,'!'+pkg.app.src+'/templates/indextpl.html'
                  ,'!'+pkg.app.src+'/header.php'
                  ,'!'+pkg.app.src+'/footer.php'
                  ,'!'+pkg.app.src+'/footer.min.php'
                  ,'!'+pkg.app.src+'/index.php'
                  ,'!'+pkg.app.src+'/*-config.php'
                  ...

=====================

It should in purpose to exclude those files for backend job because the deployment is for css and js changes. So I just try to follow the same flow and just skip this command ==> "sudo mv /var/www /var/www.org" And it works fine without the manual copy.

May I confirm if skip "sudo mv /var/www /var/www.org" is a correct way or I still need to manual copy the dist/.../www to /var/www?

Thanks again~~

Jacob