Can't pair rPI2 with PC: "Failed to pair to server: Error"

moonlight-stream / moonlight-embedded

Gamestream client for embedded systems

https://github.com/moonlight-stream/moonlight-embedded/wiki

GNU General Public License v3.0

1.51k stars 325 forks source link

Can't pair rPI2 with PC: "Failed to pair to server: Error" #332

Closed Roet-Ivar closed 8 years ago

Roet-Ivar commented 8 years ago

Info: I use the latest version of GeForce Experience 2.10.2 on PC and RecalboxOS 4.0.0-beta1 on the Raspberry pi 2.

What I've tested:

I've added my IP in the moonlight config.
When running: "./Moonlight.sh pair" I get the pairing code sent to my PC (connections seems fine), but after ~10s I get "Failed to pair to server: Error".
There is no "keyfolder" created from any attempts that I can delete either since I never got further than this.

Any ideas?

EDIT: From Recalbox website: "GFE 2.10 + Moonlight 2.1.3 seem not to be doing well together yet. Prefer GFE 2.9 if possible" So I guess I'll have to downgrade my GFE to 2.9 and test again.

I'll come back with results later, please keep this issue open till then.

Roet-Ivar commented 8 years ago

@irtimmer Hi sir. Sorry for the duplicate. If I get this right: You have solved this issue in the coming realease of Moonlight-embedded? If so, then it's up to Recalbox devs to update the bundled version of Moonlight in their next release?

Oh, and thanks to all you guys for this software!

dead commented 8 years ago

Moonlight 2.1.3 works fine with GFE 2.10... Try compiling it yourself.

Roet-Ivar commented 8 years ago

I tested the latest beta driver of GFE and it did pair once. After a reboot the pairing seems lost so I gave it a clean and pair, and again: "Failed to pair to server: Error".

EDIT: Installed the latest Nvidia graphics drivers, now I can pair again. Let me see if this pairing seem consistent before closing.

Roet-Ivar commented 8 years ago

OK guys. It seems like the pairing is OK after using latest GPU drivers and GFE beta if running "clean" first and then the "pair" command.

Update: Nope, it doesn't want to re-pair again. It only seem to work once per install of either GFE / Geforce drivers or moonlight.

substring commented 8 years ago

@Roet-Ivar Moonlight 2.1.4 solved all my pairing troubles + my users' problems too. Have you given it a try ? Consider closing this issue if it worked fine

irtimmer commented 8 years ago

Pairing issues should be resolved with latest release.