(solved) unstable driver with last kernel in kali x86

[andreagonzalez2k]

Hello, updated Kali x86 to latest version today: Linux a 5.10.0-kali6-686-pae #1 SMP Debian 5.10.26-1kali2 (2021-04-01) i686 GNU/Linux In previous versions the driver worked very well with no issues. But in this version airodump-ng does not filter by channel and even it does not find any ap from time to time. Using default options with a usb 3.0 device powered in a usb 2.0 port. Attached dmesg output shows errors. They repeat in a loop. error_8812.txt

[andreagonzalez2k]

Sorry, my fault. I forgot to kill conflicting apps with: airmon-ng check kill Now it works like a charm again. Could it be possible not to have to kill Network manager? Thanks for your driver, it is the best for my 8812 device,

[morrownr]

You are welcome.

Quote: "Could it be possible not to have to kill Network manager?"

Answer: Yes, I have been working on a new guide. It seems to work well here. Can I get you to test it and advise?

Test Monitor Mode

Setup:

Install the aircrack-ng package

$ sudo apt install aircrack-ng

Ensure Network Manager doesn't cause problems

$ sudo nano /etc/NetworkManager/NetworkManager.conf

add

[keyfile]
unmanaged-devices=interface-name:mon0;interface-name:mon1

Note: The above tells Network Manager to disregard two interfaces. I usually just use mon0 for monitor mode. I have two usb adapters on my main box and doing it this way allows me to continue in managed mode with internet access while I use the other adapter for monitor mode.

Enable monitor mode using iw and ip:

$ sudo iw dev

phy#0
    Interface wlan0
        ifindex 3
        wdev 0x1
        addr 00:c0:ca:ad:4b:cc
        type managed
        txpower 12.00 dBm

$ sudo ip link set wlan0 down
$ sudo iw phy phy0 interface add mon0 type monitor
$ sudo ip link set mon0 down
$ sudo iw mon0 set monitor control
$ sudo ip link set mon0 up
$ sudo iw dev mon0 set channel 36 (or whatever channel you want)

---

Test injection

$ sudo aireplay-ng --test mon0

---

Test deauth

$ sudo airodump-ng mon0 --band ag

$ sudo airodump-ng mon0 --bssid <MAC address of router> --channel <channel of router>

$ sudo aireplay-ng --deauth 0 -c <deviceMAC> -a <routerMAC> mon0 -D

---

Please let me know how it goes and what changes I need to make. I realize this needs to be better documented so maybe you can help me with that.

[andreagonzalez2k]

Hello, it seems that it does not work.

┌──(root💀a)-[/home/a/Documentos/temp] └─# more /etc/NetworkManager/NetworkManager.conf
[main] plugins=ifupdown,keyfile

[ifupdown] managed=false

[keyfile] unmanaged-devices=interface-name:mon0;interface-name:mon1

┌──(root💀a)-[/home/a/Documentos/temp] └─# iw dev
phy#0 Interface mon0 ifindex 4 wdev 0x2 addr 00:00:00:00:00:00 type monitor channel 44 (5220 MHz), width: 20 MHz (no HT), center1: 5220 MHz txpower 15.00 dBm Interface wlan0 ifindex 3 wdev 0x1 addr 46:92:e2:0b:7b:2c type monitor channel 44 (5220 MHz), width: 20 MHz (no HT), center1: 5220 MHz txpower 15.00 dBm

┌──(root💀a)-[/home/a/Documentos/temp] └─# aireplay-ng --test mon0
21:33:21 Trying broadcast probe requests... 21:33:23 No Answer... 21:33:23 Found 0 APs

Using "airodump-ng mon0 --band ag" it does not find any ap in any channel (a or g band). After I executed "airmon-ng check kill" and aireplay-ng anf airodump-ng work again. One more thing is that even when I kill NetworkManager and it works in dmesg there are two warnings. I attached the file with them. warnings.txt

[morrownr]

Interface wlan0
ifindex 3
wdev 0x1
addr 46:92:e2:0b:7b:2c
type monitor

How did wlan0 get to be type monitor? It should not be monitor.

Before executing the steps I posted, you really need a clean fresh boot and don't run airmon-ng.

[andreagonzalez2k]

Hello, fresh boot. It seems that when executing "iw phy phy0 interface add mon0 type monitor" already puts mon0 in monitor mode. "iw mon0 set monitor control" also puts wlan0 in monitor mode.

┌──(root💀a)-[/home/a] └─# more /etc/NetworkManager/NetworkManager.conf [main] plugins=ifupdown,keyfile

[ifupdown] managed=false

[keyfile] unmanaged-devices=interface-name:mon0;interface-name:mon1

┌──(root💀a)-[/home/a] └─# iw dev

┌──(root💀a)-[/home/a] └─# iw dev phy#0 Interface wlan0 ifindex 3 wdev 0x1 addr ca:ad:93:b2:b1:db type managed txpower -100.00 dBm

┌──(root💀a)-[/home/a] └─# ip link set wlan0 down

┌──(root💀a)-[/home/a] └─# iw phy phy0 interface add mon0 type monitor

┌──(root💀a)-[/home/a] └─# iw dev
phy#0 Interface mon0 ifindex 4 wdev 0x2 addr 00:00:00:00:00:00 type monitor txpower -100.00 dBm Interface wlan0 ifindex 3 wdev 0x1 addr ca:ad:93:b2:b1:db type managed txpower -100.00 dBm

┌──(root💀a)-[/home/a] └─# ip link set mon0 down

┌──(root💀a)-[/home/a] └─# iw mon0 set monitor control

┌──(root💀a)-[/home/a] └─# iw dev
phy#0 Interface mon0 ifindex 4 wdev 0x2 addr 00:00:00:00:00:00 type monitor channel 1 (2412 MHz), width: 20 MHz (no HT), center1: 2412 MHz txpower 17.00 dBm Interface wlan0 ifindex 3 wdev 0x1 addr ca:ad:93:b2:b1:db type monitor channel 1 (2412 MHz), width: 20 MHz (no HT), center1: 2412 MHz txpower 17.00 dBm

┌──(root💀a)-[/home/a] └─# ip link set mon0 up

┌──(root💀a)-[/home/a] └─# iw dev mon0 set channel 44

┌──(root💀a)-[/home/a] └─# aireplay-ng --test mon0 00:40:55 Trying broadcast probe requests... 00:40:57 No Answer... 00:40:57 Found 0 APs

[morrownr]

Okay, I was testing with an adapter that has a mt7612u chipset on a Linux Mint box. Let me see about setting up an adapter with a rtl8812au chipset on a Kali box to see what the difference is with the Realtek driver.

Yes, I am aware that some of the lines are not needed in some situations. I try to avoid using "airmon-ng check kill" myself. The setup with mon0 works well here with my main box but let me check it in your setup. Will report back.