search

morrownr / 8821au-20210708

Linux Driver for USB WiFi Adapters that are based on the RTL8811AU and RTL8821AU Chipsets - v5.12.5.2
Other
563 stars 80 forks source link

dkms-make.sh (bad exit status :2) dkms build error: 10 #106

Closed Ciren1211 closed 8 months ago

Ciren1211 commented 11 months ago

Hello, I am on a le potato and running rasbian 11. I am a complete beginner to all of this and not sure why it is not working. Here is what it gave me when i ran the ./install-driver.sh `ciren@raspberrypi:~/src/8821au-20210708 $ sudo ./install-driver.sh : --------------------------- : install-driver.sh v20230227 : aarch64 (architecture) : 4/4 (in-use/total processing units) : 1995696 (total system memory) : 6.1.46-08797-g9c18484153bc (kernel version) : gcc (Debian 10.2.1-6) 10.2.1 20210110 : dkms:2.8 : ---------------------------

Checking for previously installed drivers. : ---------------------------

Starting installation. Installing 8821au.conf to /etc/modprobe.d The dkms installation routines are in use. Copying source files to /usr/src/rtl8821au-5.12.5.2

Creating symlink /var/lib/dkms/rtl8821au/5.12.5.2/source -> /usr/src/rtl8821au-5.12.5.2

DKMS: add completed. The driver was added to dkms successfully. : ---------------------------

Kernel preparation unnecessary for this kernel. Skipping...

Building module: cleaning build area... ./dkms-make.sh.......(bad exit status: 2) Error! Bad return status for module build on kernel: 6.1.46-08797-g9c18484153bc (aarch64) Consult /var/lib/dkms/rtl8821au/5.12.5.2/build/make.log for more information. An error occurred. dkms build error: 10 Please report this error. Please copy all screen output and paste it into the problem report. Run the following before reattempting installation. $ sudo ./remove-driver.sh`

morrownr commented 11 months ago

Hi @Ciren1211

I'll try to help.

I am on a le potato and running rasbian 11

Can you explain what le potato is?

The rasbian is the very old name of the Rasberry Pi OS. Can you clarify what distro you are using?

Please run the following and post the results:

$ lsusb

: 6.1.46-08797-g9c18484153bc (kernel version) : gcc (Debian 10.2.1-6) 10.2.1 20210110

The likely cause is shown in the above 2 lines. You are running kernel 6.1 which is likely compiled by gcc-12 but then the installed gcc is showing as gcc10. That is too big of a gap. The quickest fix is likely to install gcc-12:

$ sudo apt install gcc-12

Regards