search

morrownr / 8821au-20210708

Linux Driver for USB WiFi Adapters that are based on the RTL8811AU and RTL8821AU Chipsets - v5.12.5.2
Other
740 stars 110 forks source link

USB network adapter does not work after update. #127

Closed nixxizlab closed 7 months ago

nixxizlab commented 7 months ago

Hello! The Internet adapter stopped working after updating Arch Linux. After reinstalling the driver, it began to detect the Wi-Fi network, but when connecting, it wrote that the password was incorrect. Motherboard: MSI MPG B550 GAMING PLUS.

6.6.23-1-lts x86_64
SecureBoot disabled
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 1462:7c56 Micro Star International MYSTIC LIGHT
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 005: ID 0bda:a811 Realtek Semiconductor Corp. RTL8811AU 802.11a/b/g/n/ac WLAN Adapter
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
8: phy8: Wireless LAN
    Soft blocked: no
    Hard blocked: no
rtl8821au/5.12.5.2, 6.6.23-1-lts, x86_64: installed
rtl8821au/5.12.5.2, 6.8.2-arch2-1, x86_64: installed
vboxhost/7.0.14_OSE, 6.6.23-1-lts, x86_64: installed
vboxhost/7.0.14_OSE, 6.7.6-arch1-1, x86_64: installed (WARNING! Missing some built modules!) (WARNING! Missing some built modules!) (WARNING! Missing some built modules!)
vboxhost/7.0.14_OSE, 6.8.2-arch2-1, x86_64: installed
phy#8
    Interface wlp48s0f3u1
        ifindex 16
        wdev 0x800000001
        addr (No)
        type managed
        txpower -100.00 dBm
global
country 00: DFS-UNSET
    (2402 - 2472 @ 40), (6, 20), (N/A)
    (2457 - 2482 @ 20), (6, 20), (N/A), AUTO-BW, PASSIVE-SCAN
    (2474 - 2494 @ 20), (6, 20), (N/A), NO-OFDM, PASSIVE-SCAN
    (5170 - 5250 @ 80), (6, 20), (N/A), AUTO-BW, PASSIVE-SCAN
    (5250 - 5330 @ 80), (6, 20), (0 ms), DFS, AUTO-BW, PASSIVE-SCAN
    (5490 - 5730 @ 160), (6, 20), (0 ms), DFS, PASSIVE-SCAN
    (5735 - 5835 @ 80), (6, 20), (N/A), PASSIVE-SCAN
    (57240 - 63720 @ 2160), (N/A, 0), (N/A)
morrownr commented 7 months ago

Try the following:

$ git pull $ sudo sh install-driver.sh copy and post the onscreen to here.

nixxizlab commented 7 months ago

изображение I reinstalled the driver from the latest source code

nixxizlab commented 7 months ago

Came with important clarifications, I just made a hidden segment without a password and the network connected successfully, only Wi-Fi works without a password

nixxizlab commented 7 months ago

When I connected to Wi-Fi, others with a password also started working without a password. Wi-Fi adapter here: DEXP WFA-601. Everything is decided, we can close