search

motioneye-project / motioneyeos

A Video Surveillance OS For Single-board Computers
Other
7.88k stars 902 forks source link

Can we have a more precise motion detection ? #1086

Closed Nico53220 closed 6 years ago

Nico53220 commented 7 years ago

Hello, in first thank you very much for this wonderfull and helpfull OS ;-) I just wanna ask something. Can we have a more preicise detection ? Because i have a large field of view and when something is moving, it's don't detect by the camera, maybe 0.01 or 0.05%, must be better :-)

Thank you very much . Nico from France :D

Nico53220 commented 7 years ago

Because i'm using the motion detecion at 0.1% and 1920x1080 . But when a person is moving, he is detected only before 5m, after, the detection don't works. In my opinion the frame changes is too low, in my case 0.01% or 0.05% may be better. Is it possible ?

Thank you 😉

jasaw commented 7 years ago

Have you tried adjusting the "minimum motion frames"? Try lowering it. What frame rate are you running?

jasaw commented 7 years ago

@Nico53220 Has the issue been resolved?

davimas commented 7 years ago

I have a Screensize 1600*1200 with 1,6% Treshold and Minimum Motion Frames 2 Works perfekt to 10 Meter.......

Nico53220 commented 7 years ago

@jasaw Sorry i forgot to answer but no, the probelm hasn't been resolved . I'm issuing the camera with the minimum motion frame. I think it's one frame . But like @davimas after 10 meter the motion is not detected :-( Thanks for your answers guys (thanks to you again @jasaw ).

jasaw commented 7 years ago

@Nico53220 Try turning off "Auto Noise Detection", "Despeckle Filter", and lowering the "Frame Change Threshold". If it still doesn't pick up the motion at 10m, then it's the motion detection algorithm that's the culprit. Might be worth reporting an issue in motion project at that point.

jasaw commented 6 years ago

This is really a motion software question. You might get more help if you post your question in their mailing list.