USB2 host and USB3 host is not working with OPI-ONE

Preliminary Docs

I confirm that I have read the CONTRIBUTING guide before opening this issue.

I confirm that I have read the FAQ before opening this issue.

motionEyeOS Version

I am running motionEyeOS version: motioneyeos-orangepione-20181129.

Board Model

I am using the OrangePi One.

Network Connection

My motionEyeOS unit is connected to the network via WiFi, and the USB2 host and USB3 host is not enabled, I cannot found my Wifi card using lsusb. I can enable USB2 and USB3 hosts using Armbian, run the armbian-config script and choosing hardware-USB2 host and USB3 host option, but not motioneyeOS.

Peripherals

I am using the following peripherals that I consider relevant to this issue:

Rtl8188EU USB WiFi adapter, but the driver is in module folder.

Log Files

I consider the following log files relevant to this issue:

[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.1 (root@ce2485dbc5a4) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05)) #1 SMP Sun Dec 2 23:18:45 UTC 2018 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=30c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Xunlong Orange Pi One [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 16 MiB at 0x000000005f000000 [ 0.000000] On node 0 totalpages: 131072 [ 0.000000] Normal zone: 1152 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 131072 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] random: get_random_bytes called from start_kernel+0xa0/0x440 with crng_init=0 [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s37068 r8192 d24372 u69632 [ 0.000000] pcpu-alloc: s37068 r8192 d24372 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129920 [ 0.000000] Kernel command line: earlyprintk console=tty1 root=/dev/mmcblk0p2 rootwait ro no_console_suspend panic=10 quiet loglevel=1 ipv6.disable=1 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 483084K/524288K available (12288K kernel code, 506K rwdata, 2644K rodata, 2048K init, 438K bss, 24820K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0x(ptrval) - 0x(ptrval) (14304 kB) .init : 0x(ptrval) - 0x(ptrval) (2048 kB) .data : 0x(ptrval) - 0x(ptrval) ( 507 kB) .bss : 0x(ptrval) - 0x(ptrval) ( 439 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000014] Switching to timer-based delay loop, resolution 41ns [ 0.000161] Console: colour dummy device 80x30 [ 0.000174] console [tty1] enabled [ 0.000216] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 0.000226] pid_max: default: 32768 minimum: 301 [ 0.000377] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000385] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.001055] CPU: Testing write buffer coherency: ok [ 0.001448] CPU0: update cpu_capacity 1024 [ 0.001455] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.001940] Setting up static identity map for 0x40200000 - 0x40200060 [ 0.002078] rcu: Hierarchical SRCU implementation. [ 0.002802] smp: Bringing up secondary CPUs ... [ 0.013485] CPU1: update cpu_capacity 1024 [ 0.013491] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.024253] CPU2: update cpu_capacity 1024 [ 0.024259] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.034952] CPU3: update cpu_capacity 1024 [ 0.034958] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.035041] smp: Brought up 1 node, 4 CPUs [ 0.035049] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.035053] CPU: All CPU(s) started in HYP mode. [ 0.035055] CPU: Virtualization extensions available. [ 0.035790] devtmpfs: initialized [ 0.041029] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.041140] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns [ 0.041156] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.041999] xor: measuring software checksum speed [ 0.089834] arm4regs : 1260.800 MB/sec [ 0.139881] 8regs : 768.800 MB/sec [ 0.189931] 32regs : 851.200 MB/sec [ 0.239977] neon : 1282.400 MB/sec [ 0.239981] xor: using function: neon (1282.400 MB/sec) [ 0.240048] pinctrl core: initialized pinctrl subsystem [ 0.240818] NET: Registered protocol family 16 [ 0.242309] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.243159] cpuidle: using governor ladder [ 0.243192] cpuidle: using governor menu [ 0.243584] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.243590] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.260115] cryptd: max_cpu_qlen set to 1000 [ 0.345417] raid6: int32x1 gen() 172 MB/s [ 0.430271] raid6: int32x1 xor() 158 MB/s [ 0.515571] raid6: int32x2 gen() 204 MB/s [ 0.600564] raid6: int32x2 xor() 167 MB/s [ 0.685525] raid6: int32x4 gen() 226 MB/s [ 0.770705] raid6: int32x4 xor() 174 MB/s [ 0.855715] raid6: int32x8 gen() 226 MB/s [ 0.940876] raid6: int32x8 xor() 143 MB/s [ 1.025875] raid6: neonx1 gen() 494 MB/s [ 1.110992] raid6: neonx1 xor() 461 MB/s [ 1.196081] raid6: neonx2 gen() 663 MB/s [ 1.281169] raid6: neonx2 xor() 595 MB/s [ 1.366279] raid6: neonx4 gen() 799 MB/s [ 1.451336] raid6: neonx4 xor() 671 MB/s [ 1.536419] raid6: neonx8 gen() 717 MB/s [ 1.621543] raid6: neonx8 xor() 612 MB/s [ 1.621546] raid6: using algorithm neonx4 gen() 799 MB/s [ 1.621549] raid6: .... xor() 671 MB/s, rmw enabled [ 1.621553] raid6: using neon recovery algorithm [ 1.622996] SCSI subsystem initialized [ 1.623180] usbcore: registered new interface driver usbfs [ 1.623229] usbcore: registered new interface driver hub [ 1.623341] usbcore: registered new device driver usb [ 1.623477] media: Linux media interface: v0.10 [ 1.623509] videodev: Linux video capture interface: v2.00 [ 1.623644] pps_core: LinuxPPS API ver. 1 registered [ 1.623648] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 1.623665] PTP clock support registered [ 1.623840] Advanced Linux Sound Architecture Driver Initialized. [ 1.624898] clocksource: Switched to clocksource arch_sys_counter [ 1.625161] FS-Cache: Loaded [ 1.631541] NET: Registered protocol family 2 [ 1.632156] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 1.632183] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 1.632230] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 1.632289] TCP: Hash tables configured (established 4096 bind 4096) [ 1.632373] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.632404] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.632593] NET: Registered protocol family 1 [ 1.633070] RPC: Registered named UNIX socket transport module. [ 1.633075] RPC: Registered udp transport module. [ 1.633078] RPC: Registered tcp transport module. [ 1.633081] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.633929] kvm [1]: 8-bit VMID [ 1.634461] kvm [1]: vgic interrupt IRQ16 [ 1.634621] kvm [1]: Hyp mode initialized successfully [ 1.636798] Initialise system trusted keyrings [ 1.636961] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 1.642513] zbud: loaded [ 1.643978] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.644921] FS-Cache: Netfs 'nfs' registered for caching [ 1.645370] NFS: Registering the id_resolver key type [ 1.645395] Key type id_resolver registered [ 1.645399] Key type id_legacy registered [ 1.645410] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.645421] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.646388] FS-Cache: Netfs 'cifs' registered for caching [ 1.646700] Key type cifs.spnego registered [ 1.646711] Key type cifs.idmap registered [ 1.646840] fuse init (API version 7.27) [ 1.647285] SGI XFS with ACLs, security attributes, no debug enabled [ 1.653946] async_tx: api initialized (async) [ 1.653960] Key type asymmetric registered [ 1.653965] Asymmetric key parser 'x509' registered [ 1.654029] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 1.654166] io scheduler noop registered (default) [ 1.654171] io scheduler deadline registered [ 1.654350] io scheduler cfq registered [ 1.654355] io scheduler mq-deadline registered [ 1.654474] io scheduler bfq registered [ 1.655116] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO [ 1.658718] sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 1.660234] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver [ 1.664235] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 1.685851] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 37, base_baud = 1500000) is a U6_16550A [ 1.703507] sun4i-drm display-engine: bound 1100000.mixer (ops 0xc0e77d40) [ 1.703761] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops 0xc0e74fdc) [ 1.704540] sun8i-dw-hdmi 1ee0000.hdmi: Detected HDMI TX controller v1.32a with HDCP (sun8i_dw_hdmi_phy) [ 1.704858] sun8i-dw-hdmi 1ee0000.hdmi: registered DesignWare HDMI I2C bus driver [ 1.705096] sun4i-drm display-engine: bound 1ee0000.hdmi (ops 0xc0e777c4) [ 1.705104] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.705107] [drm] No driver support for vblank timestamp query. [ 1.705169] [drm] Cannot find any crtc or sizes [ 1.705561] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0 [ 1.714204] brd: module loaded [ 1.721793] loop: module loaded [ 1.737773] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 1.739772] libphy: Fixed MDIO Bus: probed [ 1.739778] tun: Universal TUN/TAP device driver, 1.6 [ 1.740390] dwmac-sun8i 1c30000.ethernet: PTP uses main clock [ 1.740429] dwmac-sun8i 1c30000.ethernet: No regulator found [ 1.740713] dwmac-sun8i 1c30000.ethernet: Current syscon value is not the default 148000 (expect 58000) [ 1.740732] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported [ 1.740738] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported [ 1.740744] dwmac-sun8i 1c30000.ethernet: COE Type 2 [ 1.740748] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported [ 1.740754] dwmac-sun8i 1c30000.ethernet: Normal descriptors [ 1.740759] dwmac-sun8i 1c30000.ethernet: Chain mode enabled [ 1.740866] libphy: stmmac: probed [ 1.741280] dwmac-sun8i 1c30000.ethernet: Found internal PHY node [ 1.741365] libphy: mdio_mux: probed [ 1.741383] dwmac-sun8i 1c30000.ethernet: Switch mux to internal PHY [ 1.741391] dwmac-sun8i 1c30000.ethernet: Powering internal PHY [ 1.742262] libphy: mdio_mux: probed [ 1.742642] usbcore: registered new interface driver rt2800usb [ 1.742682] usbcore: registered new interface driver r8152 [ 1.742729] usbcore: registered new interface driver asix [ 1.742788] usbcore: registered new interface driver ax88179_178a [ 1.742822] usbcore: registered new interface driver cdc_ether [ 1.742855] usbcore: registered new interface driver net1080 [ 1.742887] usbcore: registered new interface driver cdc_subset [ 1.742919] usbcore: registered new interface driver zaurus [ 1.742973] usbcore: registered new interface driver cdc_ncm [ 1.742983] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.742986] ehci-platform: EHCI generic platform driver [ 1.743141] ehci-platform 1c1a000.usb: EHCI Host Controller [ 1.743168] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1 [ 1.743473] ehci-platform 1c1a000.usb: irq 26, io mem 0x01c1a000 [ 1.754909] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00 [ 1.755158] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.755166] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.755172] usb usb1: Product: EHCI Host Controller [ 1.755177] usb usb1: Manufacturer: Linux 4.19.1 ehci_hcd [ 1.755182] usb usb1: SerialNumber: 1c1a000.usb [ 1.755648] hub 1-0:1.0: USB hub found [ 1.755692] hub 1-0:1.0: 1 port detected [ 1.756236] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.756258] ohci-platform: OHCI generic platform driver [ 1.756392] ohci-platform 1c1a400.usb: Generic Platform OHCI controller [ 1.756413] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2 [ 1.756627] ohci-platform 1c1a400.usb: irq 27, io mem 0x01c1a400 [ 1.819068] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.819076] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.819081] usb usb2: Product: Generic Platform OHCI controller [ 1.819086] usb usb2: Manufacturer: Linux 4.19.1 ohci_hcd [ 1.819091] usb usb2: SerialNumber: 1c1a400.usb [ 1.819493] hub 2-0:1.0: USB hub found [ 1.819523] hub 2-0:1.0: 1 port detected [ 1.820095] usbcore: registered new interface driver cdc_acm [ 1.820099] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.820150] usbcore: registered new interface driver usblp [ 1.820187] usbcore: registered new interface driver cdc_wdm [ 1.820225] usbcore: registered new interface driver uas [ 1.820308] usbcore: registered new interface driver usb-storage [ 1.820392] usbcore: registered new interface driver ch341 [ 1.820421] usbserial: USB Serial support registered for ch341-uart [ 1.820456] usbcore: registered new interface driver cp210x [ 1.820482] usbserial: USB Serial support registered for cp210x [ 1.820530] usbcore: registered new interface driver ftdi_sio [ 1.820562] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.820669] usbcore: registered new interface driver pl2303 [ 1.820702] usbserial: USB Serial support registered for pl2303 [ 1.821465] vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller [ 1.821476] vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus number 3 [ 1.821509] vhci_hcd: created sysfs vhci_hcd.0 [ 1.821663] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.821670] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.821675] usb usb3: Product: USB/IP Virtual Host Controller [ 1.821680] usb usb3: Manufacturer: Linux 4.19.1 vhci_hcd [ 1.821685] usb usb3: SerialNumber: vhci_hcd.0 [ 1.822082] hub 3-0:1.0: USB hub found [ 1.822118] hub 3-0:1.0: 8 ports detected [ 1.822549] vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller [ 1.822558] vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus number 4 [ 1.822636] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.822747] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 1.822754] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.822759] usb usb4: Product: USB/IP Virtual Host Controller [ 1.822764] usb usb4: Manufacturer: Linux 4.19.1 vhci_hcd [ 1.822769] usb usb4: SerialNumber: vhci_hcd.0 [ 1.823090] hub 4-0:1.0: USB hub found [ 1.823120] hub 4-0:1.0: 8 ports detected [ 1.823657] usbcore: registered new device driver usbip-host [ 1.824182] mousedev: PS/2 mouse device common for all mice [ 1.824544] sun6i-rtc 1f00000.rtc: rtc core: registered rtc-sun6i as rtc0 [ 1.824550] sun6i-rtc 1f00000.rtc: RTC enabled [ 1.824618] i2c /dev entries driver [ 1.824966] IR NEC protocol handler initialized [ 1.824970] IR RC5(x/sz) protocol handler initialized [ 1.824973] IR RC6 protocol handler initialized [ 1.824975] IR JVC protocol handler initialized [ 1.824978] IR Sony protocol handler initialized [ 1.824980] IR SANYO protocol handler initialized [ 1.824983] IR Sharp protocol handler initialized [ 1.824986] IR MCE Keyboard/mouse protocol handler initialized [ 1.824988] IR XMP protocol handler initialized [ 1.825761] thermal thermal_zone0: failed to read out thermal zone (-16) [ 1.826183] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.826563] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 1.827714] sunxi-mmc 1c0f000.mmc: Linked as a consumer to regulator.2 [ 1.828068] ledtrig-cpu: registered to indicate activity on CPUs [ 1.828176] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 1.828274] hidraw: raw HID events driver (C) Jiri Kosina [ 1.828448] usbcore: registered new interface driver usbhid [ 1.828451] usbhid: USB HID core driver [ 1.834095] usbcore: registered new interface driver snd-usb-audio [ 1.835949] GACT probability NOT on [ 1.837352] xt_time: kernel timezone is -0000 [ 1.837491] wireguard: WireGuard 0.0.20181018 loaded. See www.wireguard.com for information. [ 1.837494] wireguard: Copyright (C) 2015-2018 Jason A. Donenfeld Jason@zx2c4.com. All Rights Reserved. [ 1.837634] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 1.838670] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully [ 1.838686] Initializing XFRM netlink socket [ 1.838712] IPv6: Loaded, but administratively disabled, reboot required to enable [ 1.838716] IPv6: ah6_init: can't add xfrm type [ 1.838719] IPv6: esp6_init: can't add xfrm type [ 1.838722] IPv6: ipcomp6_init: can't add xfrm type [ 1.852525] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB [ 1.885156] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.885254] mmc0: new SDHC card at address 0001 [ 1.886343] mmcblk0: mmc0:0001 ASTC 14.9 GiB [ 1.888430] mmcblk0: p1 p2 [ 1.905498] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.905860] NET: Registered protocol family 17 [ 1.905887] NET: Registered protocol family 15 [ 1.905954] Bridge firewalling registered [ 1.906287] l2tp_core: L2TP core driver, V2.0 [ 1.906291] l2tp_netlink: L2TP netlink interface [ 1.906336] 8021q: 802.1Q VLAN Support v1.8 [ 1.906390] Key type dns_resolver registered [ 1.906694] Registering SWP/SWPB emulation handler [ 1.907946] registered taskstats version 1 [ 1.907951] Loading compiled-in X.509 certificates [ 1.908875] Btrfs loaded, crc32c=crc32c-generic [ 1.909517] Key type encrypted registered [ 1.917389] sun4i-usb-phy 1c19400.phy: Linked as a consumer to regulator.4 [ 1.918190] ehci-platform 1c1b000.usb: EHCI Host Controller [ 1.918219] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 5 [ 1.918526] ehci-platform 1c1b000.usb: irq 28, io mem 0x01c1b000 [ 1.929912] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00 [ 1.930109] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.930116] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.930122] usb usb5: Product: EHCI Host Controller [ 1.930127] usb usb5: Manufacturer: Linux 4.19.1 ehci_hcd [ 1.930132] usb usb5: SerialNumber: 1c1b000.usb [ 1.930596] hub 5-0:1.0: USB hub found [ 1.930646] hub 5-0:1.0: 1 port detected [ 1.931244] ohci-platform 1c1b400.usb: Generic Platform OHCI controller [ 1.931268] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 6 [ 1.931474] ohci-platform 1c1b400.usb: irq 29, io mem 0x01c1b400 [ 1.994073] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.994081] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.994086] usb usb6: Product: Generic Platform OHCI controller [ 1.994091] usb usb6: Manufacturer: Linux 4.19.1 ohci_hcd [ 1.994096] usb usb6: SerialNumber: 1c1b400.usb [ 1.994491] hub 6-0:1.0: USB hub found [ 1.994523] hub 6-0:1.0: 1 port detected [ 1.995137] usb_phy_generic usb_phy_generic.3.auto: usb_phy_generic.3.auto supply vcc not found, using dummy regulator [ 1.995222] usb_phy_generic usb_phy_generic.3.auto: Linked as a consumer to regulator.0 [ 1.995456] musb-hdrc musb-hdrc.4.auto: MUSB HDRC host driver [ 1.995467] musb-hdrc musb-hdrc.4.auto: new USB bus registered, assigned bus number 7 [ 1.995619] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.995626] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.995631] usb usb7: Product: MUSB HDRC host driver [ 1.995637] usb usb7: Manufacturer: Linux 4.19.1 musb-hcd [ 1.995641] usb usb7: SerialNumber: musb-hdrc.4.auto [ 1.996013] hub 7-0:1.0: USB hub found [ 1.996047] hub 7-0:1.0: 1 port detected [ 1.996546] cpu cpu0: Linked as a consumer to regulator.5 [ 1.996597] cpu cpu0: Dropping the link to regulator.5 [ 1.996741] cpu cpu0: Linked as a consumer to regulator.5 [ 1.997342] core: _opp_supported_by_regulators: OPP minuV: 1320000 maxuV: 1320000, not supported by regulator [ 1.997351] cpu cpu0: _opp_add: OPP not supported by regulators (1056000000) [ 1.997439] core: _opp_supported_by_regulators: OPP minuV: 1320000 maxuV: 1320000, not supported by regulator [ 1.997446] cpu cpu0: _opp_add: OPP not supported by regulators (1104000000) [ 1.997527] core: _opp_supported_by_regulators: OPP minuV: 1320000 maxuV: 1320000, not supported by regulator [ 1.997533] cpu cpu0: _opp_add: OPP not supported by regulators (1152000000) [ 1.997604] core: _opp_supported_by_regulators: OPP minuV: 1320000 maxuV: 1320000, not supported by regulator [ 1.997610] cpu cpu0: _opp_add: OPP not supported by regulators (1200000000) [ 1.997689] core: _opp_supported_by_regulators: OPP minuV: 1340000 maxuV: 1340000, not supported by regulator [ 1.997696] cpu cpu0: _opp_add: OPP not supported by regulators (1224000000) [ 1.997782] core: _opp_supported_by_regulators: OPP minuV: 1340000 maxuV: 1340000, not supported by regulator [ 1.997788] cpu cpu0: _opp_add: OPP not supported by regulators (1248000000) [ 1.997852] core: _opp_supported_by_regulators: OPP minuV: 1340000 maxuV: 1340000, not supported by regulator [ 1.997859] cpu cpu0: _opp_add: OPP not supported by regulators (1296000000) [ 1.997946] core: _opp_supported_by_regulators: OPP minuV: 1400000 maxuV: 1400000, not supported by regulator [ 1.997953] cpu cpu0: _opp_add: OPP not supported by regulators (1344000000) [ 1.998033] core: _opp_supported_by_regulators: OPP minuV: 1400000 maxuV: 1400000, not supported by regulator [ 1.998039] cpu cpu0: _opp_add: OPP not supported by regulators (1368000000) [ 1.998306] thermal thermal_zone0: failed to read out thermal zone (-16) [ 1.998899] input: r_gpio_keys as /devices/platform/r_gpio_keys/input/input0 [ 1.999176] sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01 00:00:07 UTC (7) [ 1.999362] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.002028] cfg80211: Loaded X.509 cert 'sforshee: ' [ 2.002154] vcc3v0: disabling [ 2.002160] vcc5v0: disabling [ 2.002164] usb0-vbus: disabling [ 2.002172] ALSA device list: [ 2.002176] #0: Dummy 1 [ 2.002179] #1: Loopback 1 [ 2.003006] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.003014] cfg80211: failed to load regulatory.db [ 2.010155] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null) [ 2.010204] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 2.011205] devtmpfs: mounted [ 2.013349] Freeing unused kernel memory: 2048K [ 2.025171] Run /sbin/init as init process [ 2.577969] random: fast init done [ 2.739992] [drm] Cannot find any crtc or sizes [ 35.500085] random: crng init done [ 37.165402] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 39.063414] udevd[330]: starting version 3.2.5 [ 39.137735] udevd[331]: starting eudev-3.2.5 [ 39.391663] asoc-simple-card soc:sound: i2s-hifi <-> 1c22800.i2s mapping ok [ 39.943273] Generic PHY 0.1:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0.1:01, irq=POLL) [ 39.945560] dwmac-sun8i 1c30000.ethernet eth0: No Safety Features support found [ 39.945574] dwmac-sun8i 1c30000.ethernet eth0: No MAC Management Counters available [ 39.945583] dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW [ 42.020541] dwmac-sun8i 1c30000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 66.854432] system date is 1970-01-01 00:01:12

motioneye-project / motioneyeos