Motion Detection starts during IR filter transition

[RichBuck89]

Preliminary Docs I confirm that I have read the CONTRIBUTING guide before opening this issue. yes I confirm that I have read the FAQ before opening this issue. yes

motionEyeOS Version motionEyeOS 20190911 motionEyeOS dev20191031

Board Model (both having same issue) 1 x Raspberry PI 4B 1 x Rasberry PI zero w

Camera MakerFocus Raspberry Pi4 Camera IR, Raspberry Pi4 Camera Night Vision Fisheye Camera 5mp OV5647 IR-CUT LINK

Network Connection 1 x gigabit Ethernet 1 x Wireless N

Hello,

I have several cameras with the IR-CUT filter

They work great and remove the red tint during day time video. One issue I have is that the motion detection starts when switching between the IR filter randomly at dusk then again at dawn.

I've found that changing the Minimum Motion Frames helps but setting it to 90 frames is around 5-6 seconds of missing motion detection any higher it seems to work but I have to stand there and do jumping jacks for a while to get the motion detection to start... I've played around with the Light Switch Detection and it doesn't seem to do anything even at 100%.

Is there a better way of getting the IR-CUT to stop tripping the motion detection?

Sample video

Thanks, jake

[starbasessd]

Have you tried Light Switch Detection?

On Tue, Mar 24, 2020 at 1:36 PM RichBuck89 notifications@github.com wrote:

Preliminary Docs I confirm that I have read the CONTRIBUTING guide before opening this issue. yes I confirm that I have read the FAQ before opening this issue. yes

motionEyeOS Version motionEyeOS 20190911 motionEyeOS dev20191031

Board Model (both having same issue) 1 x Raspberry PI 4B 1 x Rasberry PI zero w

Camera MakerFocus Raspberry Pi4 Camera IR, Raspberry Pi4 Camera Night Vision Fisheye Camera 5mp OV5647 IR-CUT LINK https://www.amazon.com/gp/product/B07DPNDP6R/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

Network Connection 1 x gigabit Ethernet 1 x Wireless N

Hello,

I have several cameras with the IR-CUT filter https://www.amazon.com/gp/product/B07DPNDP6R/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

They work great and remove the red tint during day time video. One issue I have is that the motion detection starts when switching between the IR filter randomly.

I've found that changing the Minimum Motion Frames helps but setting it to 90 frames is around 5-6 seconds of missing motion detection any higher it seems to work but I have to stand there and do jumping jacks for a while to get the motion detection to start... I've played around with the Light Switch Detection and it doesn't seem to do anything even at 100%.

Is there a better way of getting the IR-CUT to stop tripping the motion detection?

Sample video https://drive.google.com/open?id=1cOO3jpyMCTXcfrV_5r5E6QKey-amxeQp

Thanks, jake

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/ccrisan/motioneyeos/issues/2329, or unsubscribe https://github.com/notifications/unsubscribe-auth/AEZTUHOW22KUW657WADCSQDRJDVSNANCNFSM4LS3L6RA .

-- Thanks

Kevin Shumaker

Personal Tech Support https://kevinshumaker.wixsite.com/thethirdlevel

N38° 19' 56.52" W85° 45' 8.56"

Semper Gumby “Don't tell people how to do things. Tell them what to do and let them surprise you with their results.” - G.S. Patton, Gen. USA Ethics are what we do when no one else is looking. Quis custodiet ipsos custodes? “There is no end to the good you can do if you don’t care who gets the credit.” - C Powell You know we're sitting on four million pounds of fuel, one nuclear weapon and a thing that has 270,000 moving parts built by the lowest bidder. Makes you feel good, doesn't it?

[RichBuck89]

Yes, I've set it to 100% and tried a few others as well. Doesn't seem to help.

[tefracky]

I know the topic is old, but I have the same problem. Did you find any solution? Or as a workaround, were you able to disable the ir filter from the camera?

[RichBuck89]

No I never found a solution.

On Wed, Oct 6, 2021, 1:42 AM tefracky @.***> wrote:

I know the topic is old, but I have the same problem. Did you find any solution? Or as a workaround, were you able to disable the ir filter from the camera?

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/ccrisan/motioneyeos/issues/2329#issuecomment-935585860, or unsubscribe https://github.com/notifications/unsubscribe-auth/AN4AU6FSDU3RQILFQO5IBTDUFPVWXANCNFSM4LS3L6RA . Triage notifications on the go with GitHub Mobile for iOS https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Android https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub.