search

motioneye-project / motioneyeos

A Video Surveillance OS For Single-board Computers
Other
7.85k stars 897 forks source link

Question about correct configuration for best performance #2330

Open kkwwm opened 4 years ago

kkwwm commented 4 years ago

Preliminary Docs

I confirm that I have read the CONTRIBUTING guide before opening this issue.

I confirm that I have read the FAQ before opening this issue.

motionEyeOS Version

I am running motionEyeOS version: 20190911

Board Model

Raspberry PI 3B+

Camera

4 cheap Chinese IP wifi cameras. Each of them set as "Network camera"

Network Connection

WiFi

Peripherals

I am using the following peripherals that I consider relevant to this issue:

SATA External Hard Disk

Log Files

Hello Guys! I'd like to ask about correct configuration for best performance. I'm using RB Pi 3B+. Motion detection is turn off. Continuous recording turned on. Resolution for each cam is 1280x720, frame rate set as 15fps. I have terrible lags on preview as well as on recorded movies. Real fps is maybe 0,5fps or less. Sometimes I have to wait 30 or more seconds to refresh the preview. How should I configure this set to achieve the best performance?? Is the exchange RB Pi3B+ for Pi4 or other board will improve performance?? Thank you, cheers! Konrad

starbasessd commented 4 years ago

What networking between camera and Pi? What camera are you using? Have you tried lowering resolution, either at camera or in motionEye? (800x600, or 640x480?)

On Wed, Mar 25, 2020 at 4:40 AM kkwwm notifications@github.com wrote:

Preliminary Docs

I confirm that I have read the CONTRIBUTING https://github.com/ccrisan/motioneyeos/blob/master/.github/CONTRIBUTING.md guide before opening this issue.

I confirm that I have read the FAQ https://github.com/ccrisan/motioneyeos/wiki/FAQ before opening this issue. motionEyeOS Version

I am running motionEyeOS version: 20190911 Board Model

Raspberry PI 3B+ Camera

4 cheap Chinese IP wifi cameras. Each of them set as "Network camera" Network Connection

WiFi Peripherals

I am using the following peripherals that I consider relevant to this issue:

SATA External Hard Disk Log Files

Hello Guys! I'd like to ask about correct configuration for best performance. I'm using RB Pi 3B+. Motion detection is turn off. Continuous recording turned on. Resolution for each cam is 1280x720, frame rate set as 15fps. I have terrible lags on preview as well as on recorded movies. Real fps is maybe 0,5fps or less. Sometimes I have to wait 30 or more seconds to refresh the preview. How should I configure this set to achieve the best performance?? Is the exchange RB Pi3B+ for Pi4 or other board will improve performance?? Thank you, cheers! Konrad

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/ccrisan/motioneyeos/issues/2330, or unsubscribe https://github.com/notifications/unsubscribe-auth/AEZTUHLMIEJTXTMSYM4K473RJG7PZANCNFSM4LTI536Q .

-- Thanks

Kevin Shumaker

Personal Tech Support https://kevinshumaker.wixsite.com/thethirdlevel

N38° 19' 56.52" W85° 45' 8.56"

Semper Gumby “Don't tell people how to do things. Tell them what to do and let them surprise you with their results.” - G.S. Patton, Gen. USA Ethics are what we do when no one else is looking. Quis custodiet ipsos custodes? “There is no end to the good you can do if you don’t care who gets the credit.” - C Powell You know we're sitting on four million pounds of fuel, one nuclear weapon and a thing that has 270,000 moving parts built by the lowest bidder. Makes you feel good, doesn't it?

kkwwm commented 4 years ago

Cameras are connected via WiFi to the same (wireless) network as RB with motioneye. Those are some cheap Chinese ip cameras like this: https://www.aliexpress.com/item/4000085391518.html?spm=a2g0s.9042311.0.0.28134c4dS2YCYU When I open the rtsp stream in the browser the stream is smooth and no delay. I can't lower the resolution because picture quality will be unacceptable.

jasaw commented 4 years ago

I would try these: