MotionEye OS: general settings are not displayed in web interface

[crbl1122]

I installed for test the MotionEye OS on Raspberry Pi4B. The problem I encountered is that "general settings" are not shown, only "preferences". I use Picam camera.

How can I enable and access "Advanced settings"?

Preliminary Docs

I confirm that I have read the CONTRIBUTING guide before opening this issue.

I confirm that I have read the FAQ before opening this issue.

motionEyeOS Version

I am running motionEyeOS version: (insert your version here, e.g. 20180314).

Board Model

I am using the following board/model: (insert your board model here, e.g. Raspberry PI 3B+). Raspberry PI 4 B

Camera

Picam I am using the following type of camera: (choose from V4L2, MMAL, Network Camera, Fast Network Camera and Simple MJPEG Camera).

My camera model is: (insert your camera model, e.g. Logitech C290). PiCam

Network Connection

My motionEyeOS unit is connected to the network via: (choose your network connection, e.g. WiFi, Ethernet). UTP cable

Peripherals

I am using the following peripherals that I consider relevant to this issue:

• (e.g. USB WiFi adapter)
• (e.g. External Hard Disk)

Log Files

I consider the following log files relevant to this issue:

• (attach e.g. motioneye.log)
• (attach e.g. boot.log)

[starbasessd]

A possibility: Signed in as 'user' instead of 'admin'

You don't state which version of motionEyeOS. Try re-flashing to dev20201026

[crbl1122]

I used this image: motioneyeos-raspberrypi4-20200606.img.xz

[starbasessd]

Click on the user icon on the upper-left side of the page to switch user to administrator. Use admin with no password when asked for credentials.

[starbasessd]

I really recommend dev20201026 for Pi4s, especially Pi4-4GB and Pi4-8GB...