Can't see live preview feed, even though it was working at one point

[ayrfield2]

I had trouble with my camera a while ago, so i did a fresh install today. Initially, the camera was working - i could see the live feed. I changed a few minor settings and now i am just getting the icon of the camera with the line through it.

Preliminary Docs

I confirm that I have read the CONTRIBUTING guide before opening this issue.

I confirm that I have read the FAQ before opening this issue.

motionEyeOS Version

I am running motionEyeOS version: 20200606

Board Model

I am using the following board/model: Raspberry PI 3.

Camera

I am using the following type of camera: (choose from V4L2, MMAL, Network Camera, Fast Network Camera and Simple MJPEG Camera).

My camera model is: ZeroCam Fisheye NightVision - for PiZero & Raspberry Pi 3

Network Connection

My motionEyeOS unit is connected to the network via: WiFi

Peripherals

I am using the following peripherals that I consider relevant to this issue:

n/a

Log Files

I consider the following log files relevant to this issue:

• (attach e.g. motioneye.log)
• (attach e.g. boot.log)

motioneye.log

[starbasessd]

What specifically: " I changed a few minor settings " Please include the other 4 logs. (Under Settings, Expert Settings. motion.log, messages.log, dmesg.log, and boot.log) If you can console in, or SSH in, what is the result for: vcgencmd get_camera If you would like to reset things, you can delete the /data/etc/camera-1.conf and reboot

[ayrfield2]

Minor settings were were setting up the wifi and trying out resolutions and frame rates to see what looked good. I will try that command as soon as I get a chance.

On Sun 12 Sep 2021, 23:48 starbasessd, @.***> wrote:

What specifically: " I changed a few minor settings " Please include the other 4 logs. (Under Settings, Expert Settings. motion.log, messages.log, dmesg.log, and boot.log) If you can console in, or SSH in, what is the result for: vcgencmd get_camera If you would like to reset things, you can delete the /data/etc/camera-1.conf and reboot

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/ccrisan/motioneyeos/issues/2807#issuecomment-917724678, or unsubscribe https://github.com/notifications/unsubscribe-auth/AMV2KLBFKXE6RXVJYAD6RPTUBUU43ANCNFSM5D4Q53VQ . Triage notifications on the go with GitHub Mobile for iOS https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Android https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub.

---- booting motionEyeOS 20200606 ---- [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.83-v7 @.**) (gcc version 8.2.1 20180802 (GNU Toolchain for the A-profile Architecture 8.2-2018.11 (arm-rel-8.26))) #1 SMP Sat Jun 6 14:14:33 UTC 2020 [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 8 MiB at 0x2f800000 [ 0.000000] On node 0 totalpages: 196608 [ 0.000000] Normal zone: 1728 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:63 [ 0.000000] random: get_random_bytes called from start_kernel+0xb0/0x4b4 with crng_init=0 [ 0.000000] percpu: Embedded 16 pages/cpu s36684 r8192 d20660 u65536 [ 0.000000] pcpu-alloc: s36684 r8192 d20660 u65536 alloc=164096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 194880 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.fiq_fix_enable=1 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait ro rootflags=noload panic=10 quiet loglevel=1 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 756380K/786432K available (8192K kernel code, 655K rwdata, 2228K rodata, 1024K init, 820K bss, 21860K reserved, 8192K cma-reserved) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xb0800000 - 0xff800000 (1264 MB) lowmem : 0x80000000 - 0xb0000000 ( 768 MB) modules : 0x7f000000 - 0x80000000 ( 16 MB) .text : 0x(ptrval) - 0x(ptrval) (9184 kB) .init : 0x(ptrval) - 0x(ptrval) (1024 kB) .data : 0x(ptrval) - 0x(ptrval) ( 656 kB) .bss : 0x(ptrval) - 0x(ptrval) ( 821 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 26874 entries in 79 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000018] Switching to timer-based delay loop, resolution 52ns [ 0.000281] Console: colour dummy device 80x30 [ 0.000300] console [tty1] enabled [ 0.000341] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.000359] pid_max: default: 32768 minimum: 301 [ 0.000678] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000693] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001623] CPU: Testing write buffer coherency: ok [ 0.002084] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002735] Setting up static identity map for 0x100000 - 0x10003c [ 0.002885] rcu: Hierarchical SRCU implementation. [ 0.003679] smp: Bringing up secondary CPUs ... [ 0.004524] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.005463] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.006326] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.006449] smp: Brought up 1 node, 4 CPUs [ 0.006461] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.006467] CPU: All CPU(s) started in HYP mode. [ 0.006472] CPU: Virtualization extensions available. [ 0.007410] devtmpfs: initialized [ 0.020333] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 [ 0.020572] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.020592] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.021191] pinctrl core: initialized pinctrl subsystem [ 0.022043] NET: Registered protocol family 16 [ 0.025058] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.030708] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.030715] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.030909] Serial: AMBA PL011 UART driver [ 0.033179] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.067970] bcm2835-dma 3f007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1 [ 0.069619] SCSI subsystem initialized [ 0.069833] usbcore: registered new interface driver usbfs [ 0.069887] usbcore: registered new interface driver hub [ 0.069988] usbcore: registered new device driver usb [ 0.090126] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-11-14 15:27, variant start_x [ 0.100357] raspberrypi-firmware soc:firmware: Firmware hash is 2354eac70a98807e06bed2149bc0c5613e751c15 [ 0.111762] clocksource: Switched to clocksource arch_sys_counter [ 0.202771] VFS: Disk quotas dquot_6.6.0 [ 0.202855] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.203039] FS-Cache: Loaded [ 0.203250] CacheFiles: Loaded [ 0.213232] NET: Registered protocol family 2 [ 0.214064] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.214102] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.214210] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.214396] TCP: Hash tables configured (established 8192 bind 8192) [ 0.214533] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.214583] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.214815] NET: Registered protocol family 1 [ 0.215405] RPC: Registered named UNIX socket transport module. [ 0.215411] RPC: Registered udp transport module. [ 0.215417] RPC: Registered tcp transport module. [ 0.215423] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.216750] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available [ 0.219783] Initialise system trusted keyrings [ 0.219968] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.229698] FS-Cache: Netfs 'nfs' registered for caching [ 0.230270] NFS: Registering the id_resolver key type [ 0.230299] Key type id_resolver registered [ 0.230305] Key type id_legacy registered [ 0.230321] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.232614] Key type asymmetric registered [ 0.232623] Asymmetric key parser 'x509' registered [ 0.232672] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.232835] io scheduler noop registered [ 0.232841] io scheduler deadline registered [ 0.233024] io scheduler cfq registered (default) [ 0.233032] io scheduler mq-deadline registered [ 0.233039] io scheduler kyber registered [ 0.236106] bcm2708_fb soc:fb: FB found 1 display(s) [ 0.245064] Console: switching to colour frame buffer device 82x26 [ 0.249499] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 656x416 [ 0.251623] bcm2835-rng 3f104000.rng: hwrng registered [ 0.251998] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 0.252506] vc-sm: Videocore shared memory driver [ 0.252835] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [ 0.263501] brd: module loaded [ 0.273475] loop: module loaded [ 0.274074] Loading iSCSI transport class v2.0-870. [ 0.274764] libphy: Fixed MDIO Bus: probed [ 0.274866] usbcore: registered new interface driver lan78xx [ 0.274922] usbcore: registered new interface driver smsc95xx [ 0.274938] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 0.302790] dwc_otg 3f980000.usb: base=(ptrval) [ 0.503021] Core Release: 2.80a [ 0.503031] Setting default values for core params [ 0.503056] Finished setting default values for core params [ 0.703359] Using Buffer DMA mode [ 0.703366] Periodic Transfer Interrupt Enhancement - disabled [ 0.703372] Multiprocessor Interrupt Enhancement - disabled [ 0.703379] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 0.703397] Dedicated Tx FIFOs mode [ 0.703854] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = af904000 dma = 0xef904000 len=9024 [ 0.703880] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints Interrupt/Control Split Transaction hack enabled [ 0.703887] dwc_otg: Microframe scheduler enabled [ 0.703944] WARN::hcd_init_fiq:457: FIQ on core 1 [ 0.703955] WARN::hcd_init_fiq:458: FIQ ASM at 8067bbe4 length 36 [ 0.703968] WARN::hcd_init_fiq:497: MPHI regs_base at b0810000 [ 0.703984] dwc_otg 3f980000.usb: DWC OTG Controller [ 0.704017] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 0.704051] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000 [ 0.704098] Init: Port Power? op_state=1 [ 0.704104] Init: Power Port (0) [ 0.704355] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 0.704366] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.704375] usb usb1: Product: DWC OTG Controller [ 0.704384] usb usb1: Manufacturer: Linux 4.19.83-v7 dwc_otg_hcd [ 0.704393] usb usb1: SerialNumber: 3f980000.usb [ 0.705006] hub 1-0:1.0: USB hub found [ 0.705059] hub 1-0:1.0: 1 port detected [ 0.705620] dwc_otg: FIQ enabled [ 0.705626] dwc_otg: NAK holdoff enabled [ 0.705632] dwc_otg: FIQ split-transaction FSM enabled [ 0.705642] Module dwc_common_port init [ 0.705903] usbcore: registered new interface driver usb-storage [ 0.706076] mousedev: PS/2 mouse device common for all mice [ 0.706939] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 0.707162] bcm2835-cpufreq: min=600000 max=1200000 [ 0.707629] sdhci: Secure Digital Host Controller Interface driver [ 0.707634] sdhci: Copyright(c) Pierre Ossman [ 0.708006] mmc-bcm2835 3f300000.mmcnr: could not get clk, deferring probe [ 0.708388] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe [ 0.708518] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.710017] ledtrig-cpu: registered to indicate activity on CPUs [ 0.710204] hidraw: raw HID events driver (C) Jiri Kosina [ 0.710378] usbcore: registered new interface driver usbhid [ 0.710384] usbhid: USB HID core driver [ 0.711328] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0

[ 0.721681] [vc_sm_connected_init]: end - returning 0 [ 0.723107] Initializing XFRM netlink socket [ 0.723134] NET: Registered protocol family 17 [ 0.723249] Key type dns_resolver registered [ 0.723756] Registering SWP/SWPB emulation handler [ 0.724398] registered taskstats version 1 [ 0.724414] Loading compiled-in X.509 certificates [ 0.731615] uart-pl011 3f201000.serial: cts_event_workaround enabled [ 0.731693] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2 [ 0.733588] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 0.733598] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated [ 0.759823] sdhost: log_buf @ (ptrval) (ef907000) [ 0.797357] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 0.798942] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 0.800524] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 0.803352] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 0.807751] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 0.809061] of_cfs_init [ 0.809166] of_cfs_init: OK [ 0.809831] Waiting for root device /dev/mmcblk0p2... [ 0.874868] random: fast init done [ 0.895934] mmc0: host does not support reading read-only switch, assuming write-enable [ 0.899917] mmc0: new high speed SDXC card at address aaaa [ 0.901146] mmcblk0: mmc0:aaaa SC64G 59.5 GiB [ 0.903989] mmcblk0: p1 p2 [ 0.918078] mmc1: new high speed SDIO card at address 0001 [ 0.928641] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: noload [ 0.928691] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 0.929206] devtmpfs: mounted [ 0.931899] Indeed it is in host mode hprt0 = 00021501 [ 0.993370] Freeing unused kernel memory: 1024K [ 1.022182] Run /sbin/init as init process [ 1.141829] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 1.141978] Indeed it is in host mode hprt0 = 00001101 [ 1.382167] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [ 1.382184] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.382858] hub 1-1:1.0: USB hub found [ 1.382952] hub 1-1:1.0: 5 ports detected [ 1.701829] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 1.832044] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [ 1.832056] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.834767] smsc95xx v1.0.6 [ 1.925218] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:c6:99:c7 [ 33.020254] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 34.069319] random: smbpasswd: uninitialized urandom read (8 bytes read) [ 34.074369] random: smbpasswd: uninitialized urandom read (12 bytes read) [ 34.502295] media: Linux media interface: v0.10 [ 34.533680] videodev: Linux video capture interface: v2.00 [ 34.558758] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 34.561133] bcm2835_vc_sm_cma_probe: Videocore shared memory driver

[ 34.561669] [vc_sm_connected_init]: installed successfully [ 34.564677] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 34.569831] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 35.204716] bcm2835-v4l2: scene mode selected 0, was 0 [ 35.205073] bcm2835-v4l2: V4L2 device registered as video0 - stills mode > 1920x1200 [ 35.210094] bcm2835-v4l2: Broadcom 2835 MMAL video capture ver 0.0.2 loaded. [ 35.300563] i2c /dev entries driver [ 35.650973] udevd[359]: starting version 3.2.7 [ 35.671522] random: udevd: uninitialized urandom read (16 bytes read) [ 35.672376] random: udevd: uninitialized urandom read (16 bytes read) [ 35.672435] random: udevd: uninitialized urandom read (16 bytes read) [ 35.692905] udevd[360]: starting eudev-3.2.7 [ 35.832501] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 35.840433] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 35.842772] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 35.842808] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 35.847285] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 35.847317] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 35.852189] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 35.852214] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 35.858384] bcm2835_audio soc:audio: card created with 8 channels [ 35.950833] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 36.073368] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 36.109975] brcmfmac: F1 signature read @0x18000000=0x1541a9a6 [ 36.113601] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1 [ 36.113755] usbcore: registered new interface driver brcmfmac [ 36.296604] random: crng init done [ 36.296614] random: 2 urandom warning(s) missed due to ratelimiting [ 36.327695] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1 [ 36.327770] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available [ 36.328309] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f [ 36.683002] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 38.197553] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x5DE1 [ 44.268808] NET: Registered protocol family 10 [ 44.272457] Segment Routing with IPv6 [ 44.468986] system date is 2021-09-12 15:09:56 ---- booting motionEyeOS 20200606 ---- [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.83-v7 @.**) (gcc version 8.2.1 20180802 (GNU Toolchain for the A-profile Architecture 8.2-2018.11 (arm-rel-8.26))) #1 SMP Sat Jun 6 14:14:33 UTC 2020 [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 8 MiB at 0x2f800000 [ 0.000000] On node 0 totalpages: 196608 [ 0.000000] Normal zone: 1728 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:63 [ 0.000000] random: get_random_bytes called from start_kernel+0xb0/0x4b4 with crng_init=0 [ 0.000000] percpu: Embedded 16 pages/cpu s36684 r8192 d20660 u65536 [ 0.000000] pcpu-alloc: s36684 r8192 d20660 u65536 alloc=164096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 194880 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.fiq_fix_enable=1 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait ro rootflags=noload panic=10 quiet loglevel=1 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 756380K/786432K available (8192K kernel code, 655K rwdata, 2228K rodata, 1024K init, 820K bss, 21860K reserved, 8192K cma-reserved) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xb0800000 - 0xff800000 (1264 MB) lowmem : 0x80000000 - 0xb0000000 ( 768 MB) modules : 0x7f000000 - 0x80000000 ( 16 MB) .text : 0x(ptrval) - 0x(ptrval) (9184 kB) .init : 0x(ptrval) - 0x(ptrval) (1024 kB) .data : 0x(ptrval) - 0x(ptrval) ( 656 kB) .bss : 0x(ptrval) - 0x(ptrval) ( 821 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 26874 entries in 79 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000018] Switching to timer-based delay loop, resolution 52ns [ 0.000278] Console: colour dummy device 80x30 [ 0.000297] console [tty1] enabled [ 0.000337] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.000355] pid_max: default: 32768 minimum: 301 [ 0.000675] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000689] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001616] CPU: Testing write buffer coherency: ok [ 0.002082] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002733] Setting up static identity map for 0x100000 - 0x10003c [ 0.002881] rcu: Hierarchical SRCU implementation. [ 0.003672] smp: Bringing up secondary CPUs ... [ 0.004515] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.005455] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.006313] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.006437] smp: Brought up 1 node, 4 CPUs [ 0.006449] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.006455] CPU: All CPU(s) started in HYP mode. [ 0.006460] CPU: Virtualization extensions available. [ 0.007401] devtmpfs: initialized [ 0.020337] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 [ 0.020575] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.020595] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.021192] pinctrl core: initialized pinctrl subsystem [ 0.022048] NET: Registered protocol family 16 [ 0.025026] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.030666] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.030674] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.030872] Serial: AMBA PL011 UART driver [ 0.033137] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.067936] bcm2835-dma 3f007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1 [ 0.069581] SCSI subsystem initialized [ 0.069796] usbcore: registered new interface driver usbfs [ 0.069851] usbcore: registered new interface driver hub [ 0.069951] usbcore: registered new device driver usb [ 0.090124] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-11-14 15:27, variant start_x [ 0.100356] raspberrypi-firmware soc:firmware: Firmware hash is 2354eac70a98807e06bed2149bc0c5613e751c15 [ 0.111759] clocksource: Switched to clocksource arch_sys_counter [ 0.202914] VFS: Disk quotas dquot_6.6.0 [ 0.202998] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.203182] FS-Cache: Loaded [ 0.203389] CacheFiles: Loaded [ 0.213362] NET: Registered protocol family 2 [ 0.214193] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.214230] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.214340] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.214525] TCP: Hash tables configured (established 8192 bind 8192) [ 0.214662] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.214712] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.214943] NET: Registered protocol family 1 [ 0.215528] RPC: Registered named UNIX socket transport module. [ 0.215534] RPC: Registered udp transport module. [ 0.215540] RPC: Registered tcp transport module. [ 0.215545] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.216870] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available [ 0.219904] Initialise system trusted keyrings [ 0.220091] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.229826] FS-Cache: Netfs 'nfs' registered for caching [ 0.230381] NFS: Registering the id_resolver key type [ 0.230410] Key type id_resolver registered [ 0.230416] Key type id_legacy registered [ 0.230432] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.232737] Key type asymmetric registered [ 0.232746] Asymmetric key parser 'x509' registered [ 0.232796] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.232960] io scheduler noop registered [ 0.232967] io scheduler deadline registered [ 0.233149] io scheduler cfq registered (default) [ 0.233157] io scheduler mq-deadline registered [ 0.233164] io scheduler kyber registered [ 0.236396] bcm2708_fb soc:fb: FB found 1 display(s) [ 0.245367] Console: switching to colour frame buffer device 82x26 [ 0.249804] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 656x416 [ 0.251972] bcm2835-rng 3f104000.rng: hwrng registered [ 0.252304] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 0.252806] vc-sm: Videocore shared memory driver [ 0.253133] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [ 0.263739] brd: module loaded [ 0.273666] loop: module loaded [ 0.274257] Loading iSCSI transport class v2.0-870. [ 0.274937] libphy: Fixed MDIO Bus: probed [ 0.275038] usbcore: registered new interface driver lan78xx [ 0.275094] usbcore: registered new interface driver smsc95xx [ 0.275109] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 0.302954] dwc_otg 3f980000.usb: base=(ptrval) [ 0.503198] Core Release: 2.80a [ 0.503207] Setting default values for core params [ 0.503234] Finished setting default values for core params [ 0.703520] Using Buffer DMA mode [ 0.703527] Periodic Transfer Interrupt Enhancement - disabled [ 0.703533] Multiprocessor Interrupt Enhancement - disabled [ 0.703541] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 0.703559] Dedicated Tx FIFOs mode [ 0.704010] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = af904000 dma = 0xef904000 len=9024 [ 0.704035] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints Interrupt/Control Split Transaction hack enabled [ 0.704042] dwc_otg: Microframe scheduler enabled [ 0.704098] WARN::hcd_init_fiq:457: FIQ on core 1 [ 0.704109] WARN::hcd_init_fiq:458: FIQ ASM at 8067bbe4 length 36 [ 0.704122] WARN::hcd_init_fiq:497: MPHI regs_base at b0810000 [ 0.704138] dwc_otg 3f980000.usb: DWC OTG Controller [ 0.704170] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 0.704204] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000 [ 0.704251] Init: Port Power? op_state=1 [ 0.704256] Init: Power Port (0) [ 0.704507] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 0.704518] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.704527] usb usb1: Product: DWC OTG Controller [ 0.704536] usb usb1: Manufacturer: Linux 4.19.83-v7 dwc_otg_hcd [ 0.704545] usb usb1: SerialNumber: 3f980000.usb [ 0.705160] hub 1-0:1.0: USB hub found [ 0.705205] hub 1-0:1.0: 1 port detected [ 0.705775] dwc_otg: FIQ enabled [ 0.705781] dwc_otg: NAK holdoff enabled [ 0.705787] dwc_otg: FIQ split-transaction FSM enabled [ 0.705798] Module dwc_common_port init [ 0.706068] usbcore: registered new interface driver usb-storage [ 0.706241] mousedev: PS/2 mouse device common for all mice [ 0.707098] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 0.707331] bcm2835-cpufreq: min=600000 max=1200000 [ 0.707797] sdhci: Secure Digital Host Controller Interface driver [ 0.707803] sdhci: Copyright(c) Pierre Ossman [ 0.708175] mmc-bcm2835 3f300000.mmcnr: could not get clk, deferring probe [ 0.708553] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe [ 0.708684] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.710198] ledtrig-cpu: registered to indicate activity on CPUs [ 0.710386] hidraw: raw HID events driver (C) Jiri Kosina [ 0.710560] usbcore: registered new interface driver usbhid [ 0.710566] usbhid: USB HID core driver [ 0.711475] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0

[ 0.721552] [vc_sm_connected_init]: end - returning 0 [ 0.722956] Initializing XFRM netlink socket [ 0.722982] NET: Registered protocol family 17 [ 0.723088] Key type dns_resolver registered [ 0.723592] Registering SWP/SWPB emulation handler [ 0.724234] registered taskstats version 1 [ 0.724251] Loading compiled-in X.509 certificates [ 0.731446] uart-pl011 3f201000.serial: cts_event_workaround enabled [ 0.731523] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2 [ 0.733404] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 0.733414] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated [ 0.759747] sdhost: log_buf @ (ptrval) (ef907000) [ 0.796295] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 0.797881] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 0.799466] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 0.802308] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 0.807861] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 0.809140] of_cfs_init [ 0.809232] of_cfs_init: OK [ 0.809864] Waiting for root device /dev/mmcblk0p2... [ 0.875404] random: fast init done [ 0.897811] mmc0: host does not support reading read-only switch, assuming write-enable [ 0.901840] mmc0: new high speed SDXC card at address aaaa [ 0.903045] mmcblk0: mmc0:aaaa SC64G 59.5 GiB [ 0.905747] mmcblk0: p1 p2 p3 [ 0.918468] mmc1: new high speed SDIO card at address 0001 [ 0.921924] Indeed it is in host mode hprt0 = 00021501 [ 0.928475] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: noload [ 0.928522] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 0.929041] devtmpfs: mounted [ 0.983401] Freeing unused kernel memory: 1024K [ 1.012182] Run /sbin/init as init process [ 1.131836] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 1.131985] Indeed it is in host mode hprt0 = 00001101 [ 1.372277] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [ 1.372293] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.372948] hub 1-1:1.0: USB hub found [ 1.373043] hub 1-1:1.0: 5 ports detected [ 1.701813] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 1.733756] EXT4-fs (mmcblk0p3): recovery complete [ 1.736711] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 1.832248] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [ 1.832264] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.835001] smsc95xx v1.0.6 [ 1.925307] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:c6:99:c7 [ 2.088228] media: Linux media interface: v0.10 [ 2.118559] videodev: Linux video capture interface: v2.00 [ 2.143059] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 2.145400] bcm2835_vc_sm_cma_probe: Videocore shared memory driver

[ 2.145889] [vc_sm_connected_init]: installed successfully [ 2.148726] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 2.153848] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 2.787246] bcm2835-v4l2: scene mode selected 0, was 0 [ 2.787603] bcm2835-v4l2: V4L2 device registered as video0 - stills mode > 1920x1200 [ 2.792614] bcm2835-v4l2: Broadcom 2835 MMAL video capture ver 0.0.2 loaded. [ 2.881118] i2c /dev entries driver [ 3.254810] udevd[290]: starting version 3.2.7 [ 3.275283] random: udevd: uninitialized urandom read (16 bytes read) [ 3.276123] random: udevd: uninitialized urandom read (16 bytes read) [ 3.276182] random: udevd: uninitialized urandom read (16 bytes read) [ 3.298674] udevd[291]: starting eudev-3.2.7 [ 3.450134] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 3.463197] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 3.464402] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 3.464437] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 3.469234] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 3.469295] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 3.475204] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 3.475238] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 3.476787] bcm2835_audio soc:audio: card created with 8 channels [ 3.564108] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.675496] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.758986] brcmfmac: F1 signature read @0x18000000=0x1541a9a6 [ 3.762467] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1 [ 3.762621] usbcore: registered new interface driver brcmfmac [ 3.965365] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1 [ 3.965527] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available [ 3.966187] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f [ 3.967588] random: crng init done [ 3.967594] random: 2 urandom warning(s) missed due to ratelimiting [ 4.231028] brcmfmac: power management disabled [ 4.407188] brcmfmac: power management disabled [ 27.702978] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 29.105844] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x5DE1 [ 36.194571] NET: Registered protocol family 10 [ 36.198239] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 36.198938] Segment Routing with IPv6 [ 36.332209] system date is 2021-09-12 15:20:06 ---- booting motionEyeOS 20200606 ---- [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.83-v7 @.**) (gcc version 8.2.1 20180802 (GNU Toolchain for the A-profile Architecture 8.2-2018.11 (arm-rel-8.26))) #1 SMP Sat Jun 6 14:14:33 UTC 2020 [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 8 MiB at 0x2f800000 [ 0.000000] On node 0 totalpages: 196608 [ 0.000000] Normal zone: 1728 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:63 [ 0.000000] random: get_random_bytes called from start_kernel+0xb0/0x4b4 with crng_init=0 [ 0.000000] percpu: Embedded 16 pages/cpu s36684 r8192 d20660 u65536 [ 0.000000] pcpu-alloc: s36684 r8192 d20660 u65536 alloc=164096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 194880 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.fiq_fix_enable=1 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait ro rootflags=noload panic=10 quiet loglevel=1 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 756380K/786432K available (8192K kernel code, 655K rwdata, 2228K rodata, 1024K init, 820K bss, 21860K reserved, 8192K cma-reserved) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xb0800000 - 0xff800000 (1264 MB) lowmem : 0x80000000 - 0xb0000000 ( 768 MB) modules : 0x7f000000 - 0x80000000 ( 16 MB) .text : 0x(ptrval) - 0x(ptrval) (9184 kB) .init : 0x(ptrval) - 0x(ptrval) (1024 kB) .data : 0x(ptrval) - 0x(ptrval) ( 656 kB) .bss : 0x(ptrval) - 0x(ptrval) ( 821 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 26874 entries in 79 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000018] Switching to timer-based delay loop, resolution 52ns [ 0.000279] Console: colour dummy device 80x30 [ 0.000298] console [tty1] enabled [ 0.000339] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.000356] pid_max: default: 32768 minimum: 301 [ 0.000673] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000688] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001618] CPU: Testing write buffer coherency: ok [ 0.002080] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002728] Setting up static identity map for 0x100000 - 0x10003c [ 0.002878] rcu: Hierarchical SRCU implementation. [ 0.003672] smp: Bringing up secondary CPUs ... [ 0.004513] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.005455] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.006315] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.006439] smp: Brought up 1 node, 4 CPUs [ 0.006450] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.006456] CPU: All CPU(s) started in HYP mode. [ 0.006461] CPU: Virtualization extensions available. [ 0.007405] devtmpfs: initialized [ 0.020328] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 [ 0.020566] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.020585] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.021184] pinctrl core: initialized pinctrl subsystem [ 0.022036] NET: Registered protocol family 16 [ 0.025059] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.030711] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.030718] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.030910] Serial: AMBA PL011 UART driver [ 0.033175] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.067959] bcm2835-dma 3f007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1 [ 0.069610] SCSI subsystem initialized [ 0.069824] usbcore: registered new interface driver usbfs [ 0.069879] usbcore: registered new interface driver hub [ 0.069982] usbcore: registered new device driver usb [ 0.090125] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-11-14 15:27, variant start_x [ 0.100356] raspberrypi-firmware soc:firmware: Firmware hash is 2354eac70a98807e06bed2149bc0c5613e751c15 [ 0.111758] clocksource: Switched to clocksource arch_sys_counter [ 0.202905] VFS: Disk quotas dquot_6.6.0 [ 0.202989] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.203175] FS-Cache: Loaded [ 0.203384] CacheFiles: Loaded [ 0.213359] NET: Registered protocol family 2 [ 0.214188] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.214226] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.214335] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.214521] TCP: Hash tables configured (established 8192 bind 8192) [ 0.214659] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.214709] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.214940] NET: Registered protocol family 1 [ 0.215534] RPC: Registered named UNIX socket transport module. [ 0.215540] RPC: Registered udp transport module. [ 0.215546] RPC: Registered tcp transport module. [ 0.215551] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.216873] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available [ 0.219907] Initialise system trusted keyrings [ 0.220099] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.229837] FS-Cache: Netfs 'nfs' registered for caching [ 0.230408] NFS: Registering the id_resolver key type [ 0.230434] Key type id_resolver registered [ 0.230440] Key type id_legacy registered [ 0.230457] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.232837] Key type asymmetric registered [ 0.232847] Asymmetric key parser 'x509' registered [ 0.232919] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.233076] io scheduler noop registered [ 0.233083] io scheduler deadline registered [ 0.233270] io scheduler cfq registered (default) [ 0.233278] io scheduler mq-deadline registered [ 0.233285] io scheduler kyber registered [ 0.236384] bcm2708_fb soc:fb: FB found 1 display(s) [ 0.245343] Console: switching to colour frame buffer device 82x26 [ 0.249769] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 656x416 [ 0.251935] bcm2835-rng 3f104000.rng: hwrng registered [ 0.252274] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 0.252761] vc-sm: Videocore shared memory driver [ 0.253095] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [ 0.263801] brd: module loaded [ 0.273782] loop: module loaded [ 0.274378] Loading iSCSI transport class v2.0-870. [ 0.275061] libphy: Fixed MDIO Bus: probed [ 0.275163] usbcore: registered new interface driver lan78xx [ 0.275219] usbcore: registered new interface driver smsc95xx [ 0.275235] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 0.303085] dwc_otg 3f980000.usb: base=(ptrval) [ 0.503324] Core Release: 2.80a [ 0.503334] Setting default values for core params [ 0.503359] Finished setting default values for core params [ 0.703659] Using Buffer DMA mode [ 0.703666] Periodic Transfer Interrupt Enhancement - disabled [ 0.703672] Multiprocessor Interrupt Enhancement - disabled [ 0.703679] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 0.703697] Dedicated Tx FIFOs mode [ 0.704143] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = af904000 dma = 0xef904000 len=9024 [ 0.704169] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints Interrupt/Control Split Transaction hack enabled [ 0.704177] dwc_otg: Microframe scheduler enabled [ 0.704232] WARN::hcd_init_fiq:457: FIQ on core 1 [ 0.704244] WARN::hcd_init_fiq:458: FIQ ASM at 8067bbe4 length 36 [ 0.704256] WARN::hcd_init_fiq:497: MPHI regs_base at b0810000 [ 0.704272] dwc_otg 3f980000.usb: DWC OTG Controller [ 0.704305] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 0.704338] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000 [ 0.704384] Init: Port Power? op_state=1 [ 0.704390] Init: Power Port (0) [ 0.704639] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 0.704650] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.704659] usb usb1: Product: DWC OTG Controller [ 0.704668] usb usb1: Manufacturer: Linux 4.19.83-v7 dwc_otg_hcd [ 0.704677] usb usb1: SerialNumber: 3f980000.usb [ 0.705289] hub 1-0:1.0: USB hub found [ 0.705333] hub 1-0:1.0: 1 port detected [ 0.705908] dwc_otg: FIQ enabled [ 0.705914] dwc_otg: NAK holdoff enabled [ 0.705920] dwc_otg: FIQ split-transaction FSM enabled [ 0.705930] Module dwc_common_port init [ 0.706187] usbcore: registered new interface driver usb-storage [ 0.706360] mousedev: PS/2 mouse device common for all mice [ 0.707223] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 0.707446] bcm2835-cpufreq: min=600000 max=1200000 [ 0.707915] sdhci: Secure Digital Host Controller Interface driver [ 0.707920] sdhci: Copyright(c) Pierre Ossman [ 0.708297] mmc-bcm2835 3f300000.mmcnr: could not get clk, deferring probe [ 0.708676] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe [ 0.708806] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.710320] ledtrig-cpu: registered to indicate activity on CPUs [ 0.710507] hidraw: raw HID events driver (C) Jiri Kosina [ 0.710675] usbcore: registered new interface driver usbhid [ 0.710681] usbhid: USB HID core driver [ 0.711590] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0

[ 0.721774] [vc_sm_connected_init]: end - returning 0 [ 0.723151] Initializing XFRM netlink socket [ 0.723176] NET: Registered protocol family 17 [ 0.723286] Key type dns_resolver registered [ 0.723793] Registering SWP/SWPB emulation handler [ 0.724431] registered taskstats version 1 [ 0.724448] Loading compiled-in X.509 certificates [ 0.731642] uart-pl011 3f201000.serial: cts_event_workaround enabled [ 0.731719] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2 [ 0.733635] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 0.733646] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated [ 0.759869] sdhost: log_buf @ (ptrval) (ef907000) [ 0.799420] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 0.801003] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 0.802582] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 0.805400] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 0.807773] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 0.809066] of_cfs_init [ 0.809222] of_cfs_init: OK [ 0.809885] Waiting for root device /dev/mmcblk0p2... [ 0.877154] random: fast init done [ 0.896005] mmc0: host does not support reading read-only switch, assuming write-enable [ 0.900004] mmc0: new high speed SDXC card at address aaaa [ 0.901225] mmcblk0: mmc0:aaaa SC64G 59.5 GiB [ 0.904071] mmcblk0: p1 p2 p3 [ 0.920410] mmc1: new high speed SDIO card at address 0001 [ 0.928609] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: noload [ 0.928658] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 0.929178] devtmpfs: mounted [ 0.931899] Indeed it is in host mode hprt0 = 00021501 [ 0.993343] Freeing unused kernel memory: 1024K [ 1.022183] Run /sbin/init as init process [ 1.141829] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 1.141974] Indeed it is in host mode hprt0 = 00001101 [ 1.382293] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [ 1.382311] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.383203] hub 1-1:1.0: USB hub found [ 1.383312] hub 1-1:1.0: 5 ports detected [ 1.646315] EXT4-fs (mmcblk0p3): recovery complete [ 1.649313] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 1.701861] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 1.842221] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [ 1.842236] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.845098] smsc95xx v1.0.6 [ 1.935859] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:c6:99:c7 [ 2.004930] media: Linux media interface: v0.10 [ 2.035552] videodev: Linux video capture interface: v2.00 [ 2.060658] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 2.063071] bcm2835_vc_sm_cma_probe: Videocore shared memory driver

[ 2.063610] [vc_sm_connected_init]: installed successfully [ 2.066497] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 2.071652] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 2.705445] bcm2835-v4l2: scene mode selected 0, was 0 [ 2.705816] bcm2835-v4l2: V4L2 device registered as video0 - stills mode > 1920x1200 [ 2.710846] bcm2835-v4l2: Broadcom 2835 MMAL video capture ver 0.0.2 loaded. [ 2.802151] i2c /dev entries driver [ 3.170684] udevd[286]: starting version 3.2.7 [ 3.191142] random: udevd: uninitialized urandom read (16 bytes read) [ 3.191984] random: udevd: uninitialized urandom read (16 bytes read) [ 3.192045] random: udevd: uninitialized urandom read (16 bytes read) [ 3.214984] udevd[289]: starting eudev-3.2.7 [ 3.337573] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 3.344742] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 3.344773] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 3.349635] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 3.349661] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 3.356808] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 3.356834] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 3.376435] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 3.382573] bcm2835_audio soc:audio: card created with 8 channels [ 3.469546] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.599190] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.662983] brcmfmac: F1 signature read @0x18000000=0x1541a9a6 [ 3.666717] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1 [ 3.666857] usbcore: registered new interface driver brcmfmac [ 3.862982] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1 [ 3.863036] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available [ 3.863691] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f [ 3.905069] random: crng init done [ 3.905082] random: 2 urandom warning(s) missed due to ratelimiting [ 4.163881] brcmfmac: power management disabled [ 4.339770] brcmfmac: power management disabled [ 27.632927] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup ---- booting motionEyeOS 20200606 ---- [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.83-v7 @.**) (gcc version 8.2.1 20180802 (GNU Toolchain for the A-profile Architecture 8.2-2018.11 (arm-rel-8.26))) #1 SMP Sat Jun 6 14:14:33 UTC 2020 [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 8 MiB at 0x2f800000 [ 0.000000] On node 0 totalpages: 196608 [ 0.000000] Normal zone: 1728 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:63 [ 0.000000] random: get_random_bytes called from start_kernel+0xb0/0x4b4 with crng_init=0 [ 0.000000] percpu: Embedded 16 pages/cpu s36684 r8192 d20660 u65536 [ 0.000000] pcpu-alloc: s36684 r8192 d20660 u65536 alloc=164096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 194880 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.fiq_fix_enable=1 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait ro rootflags=noload panic=10 quiet loglevel=1 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 756380K/786432K available (8192K kernel code, 655K rwdata, 2228K rodata, 1024K init, 820K bss, 21860K reserved, 8192K cma-reserved) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xb0800000 - 0xff800000 (1264 MB) lowmem : 0x80000000 - 0xb0000000 ( 768 MB) modules : 0x7f000000 - 0x80000000 ( 16 MB) .text : 0x(ptrval) - 0x(ptrval) (9184 kB) .init : 0x(ptrval) - 0x(ptrval) (1024 kB) .data : 0x(ptrval) - 0x(ptrval) ( 656 kB) .bss : 0x(ptrval) - 0x(ptrval) ( 821 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 26874 entries in 79 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000018] Switching to timer-based delay loop, resolution 52ns [ 0.000278] Console: colour dummy device 80x30 [ 0.000296] console [tty1] enabled [ 0.000336] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.000352] pid_max: default: 32768 minimum: 301 [ 0.000676] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000691] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001623] CPU: Testing write buffer coherency: ok [ 0.002080] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002728] Setting up static identity map for 0x100000 - 0x10003c [ 0.002879] rcu: Hierarchical SRCU implementation. [ 0.003669] smp: Bringing up secondary CPUs ... [ 0.004511] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.005450] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.006311] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.006435] smp: Brought up 1 node, 4 CPUs [ 0.006446] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.006452] CPU: All CPU(s) started in HYP mode. [ 0.006457] CPU: Virtualization extensions available. [ 0.007399] devtmpfs: initialized [ 0.020324] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 [ 0.020563] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.020583] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.021185] pinctrl core: initialized pinctrl subsystem [ 0.022035] NET: Registered protocol family 16 [ 0.025009] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.030646] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.030653] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.030861] Serial: AMBA PL011 UART driver [ 0.033124] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.067920] bcm2835-dma 3f007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1 [ 0.069570] SCSI subsystem initialized [ 0.069784] usbcore: registered new interface driver usbfs [ 0.069839] usbcore: registered new interface driver hub [ 0.069939] usbcore: registered new device driver usb [ 0.090123] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-11-14 15:27, variant start_x [ 0.100353] raspberrypi-firmware soc:firmware: Firmware hash is 2354eac70a98807e06bed2149bc0c5613e751c15 [ 0.111757] clocksource: Switched to clocksource arch_sys_counter [ 0.202894] VFS: Disk quotas dquot_6.6.0 [ 0.202977] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.203162] FS-Cache: Loaded [ 0.203370] CacheFiles: Loaded [ 0.213338] NET: Registered protocol family 2 [ 0.214172] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.214209] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.214318] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.214504] TCP: Hash tables configured (established 8192 bind 8192) [ 0.214641] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.214691] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.214922] NET: Registered protocol family 1 [ 0.215504] RPC: Registered named UNIX socket transport module. [ 0.215510] RPC: Registered udp transport module. [ 0.215516] RPC: Registered tcp transport module. [ 0.215522] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.216846] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available [ 0.219878] Initialise system trusted keyrings [ 0.220076] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.229805] FS-Cache: Netfs 'nfs' registered for caching [ 0.230359] NFS: Registering the id_resolver key type [ 0.230389] Key type id_resolver registered [ 0.230395] Key type id_legacy registered [ 0.230411] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.232710] Key type asymmetric registered [ 0.232719] Asymmetric key parser 'x509' registered [ 0.232768] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.232931] io scheduler noop registered [ 0.232938] io scheduler deadline registered [ 0.233119] io scheduler cfq registered (default) [ 0.233127] io scheduler mq-deadline registered [ 0.233134] io scheduler kyber registered [ 0.236365] bcm2708_fb soc:fb: FB found 1 display(s) [ 0.245338] Console: switching to colour frame buffer device 82x26 [ 0.249779] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 656x416 [ 0.251952] bcm2835-rng 3f104000.rng: hwrng registered [ 0.252286] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 0.252791] vc-sm: Videocore shared memory driver [ 0.253121] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [ 0.263770] brd: module loaded [ 0.273765] loop: module loaded [ 0.274366] Loading iSCSI transport class v2.0-870. [ 0.275054] libphy: Fixed MDIO Bus: probed [ 0.275155] usbcore: registered new interface driver lan78xx [ 0.275211] usbcore: registered new interface driver smsc95xx [ 0.275226] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 0.303078] dwc_otg 3f980000.usb: base=(ptrval) [ 0.503303] Core Release: 2.80a [ 0.503312] Setting default values for core params [ 0.503338] Finished setting default values for core params [ 0.703642] Using Buffer DMA mode [ 0.703649] Periodic Transfer Interrupt Enhancement - disabled [ 0.703655] Multiprocessor Interrupt Enhancement - disabled [ 0.703662] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 0.703681] Dedicated Tx FIFOs mode [ 0.704109] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = af904000 dma = 0xef904000 len=9024 [ 0.704135] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints Interrupt/Control Split Transaction hack enabled [ 0.704142] dwc_otg: Microframe scheduler enabled [ 0.704199] WARN::hcd_init_fiq:457: FIQ on core 1 [ 0.704210] WARN::hcd_init_fiq:458: FIQ ASM at 8067bbe4 length 36 [ 0.704222] WARN::hcd_init_fiq:497: MPHI regs_base at b0810000 [ 0.704238] dwc_otg 3f980000.usb: DWC OTG Controller [ 0.704272] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 0.704305] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000 [ 0.704353] Init: Port Power? op_state=1 [ 0.704358] Init: Power Port (0) [ 0.704609] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 0.704621] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.704630] usb usb1: Product: DWC OTG Controller [ 0.704639] usb usb1: Manufacturer: Linux 4.19.83-v7 dwc_otg_hcd [ 0.704648] usb usb1: SerialNumber: 3f980000.usb [ 0.705257] hub 1-0:1.0: USB hub found [ 0.705309] hub 1-0:1.0: 1 port detected [ 0.705879] dwc_otg: FIQ enabled [ 0.705885] dwc_otg: NAK holdoff enabled [ 0.705890] dwc_otg: FIQ split-transaction FSM enabled [ 0.705903] Module dwc_common_port init [ 0.706158] usbcore: registered new interface driver usb-storage [ 0.706330] mousedev: PS/2 mouse device common for all mice [ 0.707192] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 0.707416] bcm2835-cpufreq: min=600000 max=1200000 [ 0.707881] sdhci: Secure Digital Host Controller Interface driver [ 0.707886] sdhci: Copyright(c) Pierre Ossman [ 0.708262] mmc-bcm2835 3f300000.mmcnr: could not get clk, deferring probe [ 0.708641] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe [ 0.708772] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.710298] ledtrig-cpu: registered to indicate activity on CPUs [ 0.710484] hidraw: raw HID events driver (C) Jiri Kosina [ 0.710655] usbcore: registered new interface driver usbhid [ 0.710661] usbhid: USB HID core driver [ 0.711613] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0

[ 0.721660] [vc_sm_connected_init]: end - returning 0 [ 0.723070] Initializing XFRM netlink socket [ 0.723095] NET: Registered protocol family 17 [ 0.723210] Key type dns_resolver registered [ 0.723717] Registering SWP/SWPB emulation handler [ 0.724358] registered taskstats version 1 [ 0.724374] Loading compiled-in X.509 certificates [ 0.731575] uart-pl011 3f201000.serial: cts_event_workaround enabled [ 0.731650] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2 [ 0.733553] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 0.733564] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated [ 0.759788] sdhost: log_buf @ (ptrval) (ef907000) [ 0.796336] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 0.797921] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 0.799504] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 0.802346] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 0.807715] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 0.809021] of_cfs_init [ 0.809175] of_cfs_init: OK [ 0.809849] Waiting for root device /dev/mmcblk0p2... [ 0.873905] random: fast init done [ 0.895275] mmc0: host does not support reading read-only switch, assuming write-enable [ 0.899434] mmc0: new high speed SDXC card at address aaaa [ 0.900631] mmcblk0: mmc0:aa

[starbasessd]

Adjusting the resolution and frame rate to something that motionEye/motion/ffmpeg and your camera can't agree on as well as the frame rate can cause the gray screen. In that case, try setting the resolution to 640x480 and frames to 5fps and then slowly move it back up from there.

[ayrfield2]

I tried resetting the resolution and no improvement. I also tried SSH-ing in and running the command but there was no response. Maybe I'm just not familiar with the protocol but it looked like there was no response to any commands. I couldn't even navigate directories.

On Tue 14 Sep 2021, 14:36 starbasessd, @.***> wrote:

Adjusting the resolution and frame rate to something that motionEye/motion/ffmpeg and your camera can't agree on as well as the frame rate can cause the gray screen. In that case, try setting the resolution to 640x480 and frames to 5fps and then slowly move it back up from there.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/ccrisan/motioneyeos/issues/2807#issuecomment-919157861, or unsubscribe https://github.com/notifications/unsubscribe-auth/AMV2KLEO77MC7R3SAP655M3UB5FUFANCNFSM5D4Q53VQ . Triage notifications on the go with GitHub Mobile for iOS https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Android https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub.

[starbasessd]

Sounds like a candidate for a re-install from scratch.

[ayrfield2]

This was just freshly installed over the weekend. I'll try spin it up again but I would be concerned that the same problem could crop up if I don't know what caused it in the first place.

On Wed 15 Sep 2021, 13:30 starbasessd, @.***> wrote:

Sounds like a candidate for a re-install from scratch.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/ccrisan/motioneyeos/issues/2807#issuecomment-919976237, or unsubscribe https://github.com/notifications/unsubscribe-auth/AMV2KLCZCVOUPJLIFO6GBVTUCCGWXANCNFSM5D4Q53VQ . Triage notifications on the go with GitHub Mobile for iOS https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Android https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub.

[starbasessd]

Understood, however, making random changes that you can't document makes it hard to figure out what 'broke' in your setup. I try to reproduce other's issues here in my environment. We just discovered an obscure bug after the user documented specifically what he was naming his cameras. I was then able to reproduce the issue. When you re-image, please make one change at a time, so we can see where it breaks. It may be helpful to do a back up at each stage/step so you don't have to rebuild from scratch every time. At the point of breakage, if you can save the 5 log files (boot.log, motion.log, motioneye.log, messages and dmesg, then zip and attach them to your report, it would be tremendously helpful, too. (They are found under Settings, Expert Settings)

[realdeadbeef]

I've just installed MotionEyeOS and as soon as I load the web UI it has the picture of a camera with a line through it, I have a NoIR cam connected and when I remove the camera in the ui it just breaks and says that I need to refresh. Then the UI goes down and i can't access the interface

[starbasessd]

@realdeadbeef Please open a new issue with your specifics, board, OS version, camera, etc. so we can help you.