Scrambled services support ??

mouratos66 / vtuner

Automatically exported from code.google.com/p/vtuner

0 stars 0 forks source link

Scrambled services support ?? #29

Open GoogleCodeExporter opened 9 years ago

GoogleCodeExporter commented 9 years ago

Hello!

I have problem with scrambled services. I'm using vtunerd - linuxPC(skystar1),  
and vtunerc - DM8000, image 3.2.3 as client.

I can see the ECM,EMM pids, camd.socket file is also created in /tmp. ECM is 
processed, CW is out, but no picture (mgcamd, oscam). No problem with the 
phisical tuners.

Original issue reported on code.google.com by acetelec...@gmail.com on 8 Dec 2012 at 6:04

GoogleCodeExporter commented 9 years ago

.....if there is a dreambox (vtunerd.mipsel) on server side the problem is not 
there.
I think it's a skystar1 driver problem. I've tried to change the firmware also 
to an older one (dvb-ttpci-01.fw), but the problem is always there.
It should be working with newer generation S2 DVB cards? Tevii or TBS maybe ??

Original comment by acetelec...@gmail.com on 14 Dec 2012 at 4:49

GoogleCodeExporter commented 9 years ago

So, do you have it working when you have DM8000 on server side?
May be there is the problem with restricted number of filtered PIDs (On 
SkyStar1 card)?

Original comment by jpetrous on 2 Jul 2013 at 12:43

GoogleCodeExporter commented 9 years ago

Yes, no problem with dreambox at server side. I don't think it is a PID problem 
in this case, because softcam handle the ecm pids. I see the ecm<>cw traffic. 
Could it be also some dreambox driver problem I think.
I've had a success with a dm800se on the server side before, right now there is 
no success with a dm800. I get always "Tune failed" all the channels. Only 
control packages seems to be ok,

Original comment by acetelec...@gmail.com on 13 Jul 2013 at 4:38