PC
Ubuntu 20.04
ros noetic
I have correctly installed libFranka and Franka_ros according to the tutorial before installing Moveit.
When I follow https://moveit.ros.org/install/source/ When installing Moveit 1.0 without errors in the tutorial, I conducted the following tests on the installed Moveit:
I can control the movement of the real robotic arm in rviz, but I cannot connect to the gripper and control it.
And as long as I run
roslauch frankaself-control franka_control. launch robot_ip:=172.16.3.69 load_gripper:=true,
it will change from ready to end effector unconnected on the desk interface.
When adjusting the Planning Group to panda_hand, there will be the following error:
rhaschke
commented
5 months ago
PC Ubuntu 20.04 ros noetic I have correctly installed libFranka and Franka_ros according to the tutorial before installing Moveit. When I follow https://moveit.ros.org/install/source/ When installing Moveit 1.0 without errors in the tutorial, I conducted the following tests on the installed Moveit:
I can control the movement of the real robotic arm in rviz, but I cannot connect to the gripper and control it.
And as long as I run
When adjusting the Planning Group to panda_hand, there will be the following error:
roslauch frankaself-control franka_control. launch robot_ip:=172.16.3.69 load_gripper:=true, it will change from ready to end effector unconnected on the desk interface.