search

mrbeam / OctoPrint

The Mr Beam fork of OctoPrint provides a responsive web interface for controlling a laser cutter.
http://mr-beam.org
GNU Affero General Public License v3.0
15 stars 5 forks source link

Visual progress of gco files #46

Open only1pj opened 9 years ago

only1pj commented 9 years ago

I added the greyscale image to the work area, had to resize it slightly to fit my material and clicked convert. Didnt change settings as it was first test. On clicking convert there was no confirmation it had finished. I clicked again. Nothing. Closed the page thinking it had failed. There were two .gco files in the design library.

I had removed the png file from the work area but clicked add on one of the gco files. It worked; currently burning as I type this, but the gco file which was shades of red when added, no longer shows on the work area so cannot see how far through the burn process it is.

only1pj commented 9 years ago

Convert for images appears to finish but not notify that it's done. Refresh page and accept agreement, go to library and .gco file is there.

only1pj commented 9 years ago

Latest version of octoprint

(OctoPrint: 1.2.2-319-g3516e8a Installed: Commit 3516e8a8e7d5c7dce9ed07c71f03a571e260efd5)

now rotates images but gcode image still does not show when burning.

make-ing commented 8 years ago

@only1pj: The behavior that the gcode (red shades) is not showing anymore during burning is normal. But the behavior that it's not notifying when its done is not normal. Do you still have this problem? Otherwise i will close this issue soon.