search

mrcodetastic / ESP32-HUB75-MatrixPanel-DMA

An Adafruit GFX Compatible Library for the ESP32, ESP32-S2, ESP32-S3 to drive HUB75 LED matrix panels using DMA for high refresh rates. Supports panel chaining.
MIT License
970 stars 211 forks source link

Need help with 1/8 scan P5 64x32 outdoor RGB LED matrix #698

Open sagarsapkota1 opened 10 hours ago

sagarsapkota1 commented 10 hours ago

I have found a demo code for ESP32 and that works very well for indoor P5 - 64x32 display(1/16 scan), but the same code does not work for outdoor P5- 64x32- 1/8Scan display. I have attached the entire code with all the libraries files.

If anyone has worked with outdoor 1/8s display, please help. SimpleTestShapes.zip

IMG20241115122522

nur476 commented 9 hours ago

Hello, I am facing with the same issue.

I have P5 OUTDOOR Panel 64x32 1/8 - Chips on it SM16208 and RUL5158. Supplier sent this also: scan

I am wondering that these panel can be used with this library?

I tested Four_Scan_Panel example without any change and it shows this: IMG_7749

*Sorry, for the test shown above picture, FOUR_SCAN_16PX_HIGH tested. with 32PX nothing good also.

and test with 1_Simple_Test_Shapes without any change shows:

IMG_7748

I think with some guidance it is possible to make it work. Am I right?

Any help will be appreciated.

board707 commented 1 hour ago

@sagarsapkota1 Please find all types of chips on the rear side of the panel and list it types here.