Closed wokkeltje13 closed 1 year ago
The current version doesn't have issues with 3DTouch. Check your hardware and wiring.
Think disabling the HA setting solved the issue
This issue has been automatically locked since there has not been any recent activity after it was closed. Please open a new issue for related bugs.
Did you test with a precompiled firmware?
Yes, and the problem still exists.
Bug Description
I installed a 3D Touch sensor, loaded the latest firmware (Ender3V2-422-BLTUBL-MPC-20230904) and did a factory reset. Strange thing happens after auto home that the nozzle goes up so even bed tramming is not working since the probe is not touching the bed.
I followed the procedure (https://www.webcarpenter.com/blog/162-3D-Print---How-to-calibrate-Z-offset-with-a-BLTouch-bed-leveling-probe-sensor) as described and my Z offset is -7.88. but after homing the nozzle remains to high.
I do not expect this to be a bug but probably something I did not do correct.
Printer is Ender 3V2 and I used the mount from the procedure (https://www.thingiverse.com/thing:4605354) so offset should be 1.7, so my nozzle seems to be moving 6mm to high.
Any advise?
Bug Timeline
No response
Expected behavior
No response
Actual behavior
No response
Steps to Reproduce
No response
Version of Professional Firmware
Ender3V2-422-BLTUBL-MPC-20230904
Printer model
Creality Ender 3V2
Electronics
4.2.2
Add-ons
No response
Bed Leveling
UBL Bilinear mesh
Your Slicer
None
Host Software
SD Card (headless)
Additional information & file uploads
No response