classicrocker883
commented
2 months ago rename the firmware file. you can also make sure the file is the correct size. what chip is on the board?
Open juansimon2000 opened 2 months ago
classicrocker883
commented
2 months ago rename the firmware file. you can also make sure the file is the correct size. what chip is on the board?
mriscoc
commented
2 months ago Hi, this is not a general printer support forum. Many problems can be easily solved by reading the firmware Wiki please check the calibration guide.
This Issue Queue is for firmware bug reports and development-related issues, and we prefer not to handle user-support questions here. For best results getting help with configuration and troubleshooting, please use the following resources:
Enhanced support in Patreon: https://www.patreon.com/mriscoc
Free community support:
Did you test with a precompiled firmware?
Yes, and the problem still exists.
Bug Description
mi problema es que cuando descargo el firmware mas reciente y lo coloco en la impresora no lo reconoce (inicia normalmente como si no tuviera el firmware en la trajeta sd). probe con otras verciones del firmware y con esas si funcionan pero con la vercion de placa 4.2.2 no anda. espero que entiendan mi problema. gracias
Bug Timeline
el error es nuevo
Expected behavior
esperaba que el firmware se suba normalmente a la impresora
Actual behavior
no se subio el firmware
Steps to Reproduce
primer paso: subi el firmware a la tarjeta sd formateada en fat32 a 4096 bytes segundo paso: expulse la tarjeta sd de la pc tercer paso: coloque la tarjeta sd en mi impresor cuarto paso: encendi la impresora
Version of Professional Firmware
no poseo el firmware instalado en la impresora
Printer model
Ender 3V2
Electronics
4.2.2
LCD/Controller
No response
Other add-ons
No response
Bed Leveling
MBL Manual Bed Leveling
Your Slicer
Cura
Host Software
None
Additional information & file uploads
No response