search

mrjackyliang / homebridge-adt-pulse

Homebridge security system platform for ADT Pulse
MIT License
36 stars 7 forks source link

ADT Pulse Night Mode in Home App vs Pulse App #32

Closed tarunprakashsingh closed 4 years ago

tarunprakashsingh commented 4 years ago

Describe the bug:

What do you think the problem relates to?

Steps to reproduce the bug:

  1. on ADT app and portal i only see arm stay or arm away. but one homekit i am seeing "home","away","night".

Expected behavior:

A clear and concise description of what you expected to happen. when selecting home,away or night via homekit. it does not trigger any automation i have setup on adt. so i am not sure what is wrong.

The Apple device you are using:

Homebridge information:

Find these 4 lines in the beginning of the logs, then replace the text inside the grave accents:

7/9/2020, 11:48:09 AM [ADT Pulse] Setting Security Panel (system-1) status from disarmed to night...
7/9/2020, 11:48:11 AM [ADT Pulse] Security Panel (system-1) changed from "disarmed / motion" to "armed night / motion".

Logs related to this bug:

Attempt to locate the bug in the logs, then replace SAMPLE TEXT inside the grave accents:

SAMPLE TEXT
mrjackyliang commented 4 years ago

It's not a bug. ADT only provides the night mode function by pressing the PIN + 3 + 3 keys on your keypad.

The platform (Icontrol, owned by Alarm.com) that ADT uses to host ADT Pulse has that feature connected already into our security systems.

No idea why, but I somehow guessed my way in to enable that feature for Homebridge users.

To use Night mode efficiently, you would need a technician to configure the sensors in your home.

tarunprakashsingh commented 4 years ago

Ok so basically it can only be used for disarming then.... cause if this is coming which i cant do by myself... thanks for helping out....

On Thu, Jul 9, 2020 at 1:04 PM Jacky Liang notifications@github.com wrote:

It's not a bug. ADT only provides the night mode function by pressing the PIN

  • 3 + 3 keys on your keypad.

The platform (Icontrol, owned by Alarm.com) that ADT uses to host ADT Pulse has that feature connected already into our security systems.

No idea why, but I somehow guessed my way in to enable that feature for Homebridge users.

To use Night mode efficiently, you would need a technician to configure the sensors in your home.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/mrjackyliang/homebridge-adt-pulse/issues/32#issuecomment-656243943, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAFTGSNU6FH7CWNAANR7GZ3R2X2C7ANCNFSM4OVXXIPA .

-- Thanks Tarun Singh

Like Us on Facebook CricketDepotOnline http://www.facebook.com/CricketDepotOnline Like Us on Facebook XTreme Cricket USA http://www.facebook.com/XtremeCricketUSA

mrjackyliang commented 4 years ago

You can use the Homebridge plugin to Arm Away, Arm Stay, Arm Night and Disarm. If you have ADT sensors, you can view those sensor statuses and set automations for them.

tarunprakashsingh commented 4 years ago

Hello Yes just figured it out... home= stay and i set automation to lock and stuff on arm night Too... Zwave devices dont show up... as mentioned in the doc too... wish there was a way to get them too.. But this is cool thanks for working on them. Thanks TS

On Thu, Jul 9, 2020 at 3:25 PM Jacky Liang notifications@github.com wrote:

You can use the Homebridge plugin to Arm Away, Arm Stay, Arm Night and Disarm. If you have ADT sensors, you can view those sensor statuses and set automations for them.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/mrjackyliang/homebridge-adt-pulse/issues/32#issuecomment-656307755, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAFTGSICAJTMP7GF2UU4HBLR2YKQ3ANCNFSM4OVXXIPA .

-- Thanks Tarun Singh

Like Us on Facebook CricketDepotOnline http://www.facebook.com/CricketDepotOnline Like Us on Facebook XTreme Cricket USA http://www.facebook.com/XtremeCricketUSA

mrjackyliang commented 4 years ago

The plugin doesn't support Z-Wave devices because of incompatibility reasons. I mentioned it in the readme despite many still continue to ask about it.

Since Homebridge is a large community, it's easy to figure out an alternative and have the Z-Wave devices work through other means.

knedd commented 4 years ago

There is an easy way to intergrate z wave devices. Get a SmartThings hub (very cheap), add all of your z wave devices and use the hombridge-SmartThings v2 plugin to connect the hub to HomeKit. Works like a charm for me.

Kevin

Sent via iPhone

On Jul 9, 2020, at 3:28 PM, tarunprakashsingh notifications@github.com wrote:

 Hello Yes just figured it out... home= stay and i set automation to lock and stuff on arm night Too... Zwave devices dont show up... as mentioned in the doc too... wish there was a way to get them too.. But this is cool thanks for working on them. Thanks TS

On Thu, Jul 9, 2020 at 3:25 PM Jacky Liang notifications@github.com wrote:

You can use the Homebridge plugin to Arm Away, Arm Stay, Arm Night and Disarm. If you have ADT sensors, you can view those sensor statuses and set automations for them.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/mrjackyliang/homebridge-adt-pulse/issues/32#issuecomment-656307755, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAFTGSICAJTMP7GF2UU4HBLR2YKQ3ANCNFSM4OVXXIPA .

-- Thanks Tarun Singh

Like Us on Facebook CricketDepotOnline http://www.facebook.com/CricketDepotOnline Like Us on Facebook XTreme Cricket USA http://www.facebook.com/XtremeCricketUSA — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or unsubscribe.

tarunprakashsingh commented 4 years ago

Ok i will try that.

On Thu, Jul 9, 2020 at 3:56 PM Kevin Nedd notifications@github.com wrote:

There is an easy way to intergrate z wave devices. Get a SmartThings hub (very cheap), add all of your z wave devices and use the hombridge-SmartThings v2 plugin to connect the hub to HomeKit. Works like a charm for me.

Kevin

Sent via iPhone

On Jul 9, 2020, at 3:28 PM, tarunprakashsingh notifications@github.com wrote:

 Hello Yes just figured it out... home= stay and i set automation to lock and stuff on arm night Too... Zwave devices dont show up... as mentioned in the doc too... wish there was a way to get them too.. But this is cool thanks for working on them. Thanks TS

On Thu, Jul 9, 2020 at 3:25 PM Jacky Liang notifications@github.com wrote:

You can use the Homebridge plugin to Arm Away, Arm Stay, Arm Night and Disarm. If you have ADT sensors, you can view those sensor statuses and set automations for them.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub < https://github.com/mrjackyliang/homebridge-adt-pulse/issues/32#issuecomment-656307755 , or unsubscribe < https://github.com/notifications/unsubscribe-auth/AAFTGSICAJTMP7GF2UU4HBLR2YKQ3ANCNFSM4OVXXIPA

.

-- Thanks Tarun Singh

Like Us on Facebook CricketDepotOnline http://www.facebook.com/CricketDepotOnline Like Us on Facebook XTreme Cricket USA http://www.facebook.com/XtremeCricketUSA — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or unsubscribe.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/mrjackyliang/homebridge-adt-pulse/issues/32#issuecomment-656321240, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAFTGSPKIQQ276MF3MW4LHTR2YOILANCNFSM4OVXXIPA .

-- Thanks Tarun Singh

Like Us on Facebook CricketDepotOnline http://www.facebook.com/CricketDepotOnline Like Us on Facebook XTreme Cricket USA http://www.facebook.com/XtremeCricketUSA

tarunprakashsingh commented 4 years ago

Smartthings hub is v4? V3 is 70$ and v4 bestbuy 119$ i think... Sounds right???

On Thu, Jul 9, 2020 at 4:03 PM Tarun Singh tarunprakashsingh@gmail.com wrote:

Ok i will try that.

On Thu, Jul 9, 2020 at 3:56 PM Kevin Nedd notifications@github.com wrote:

There is an easy way to intergrate z wave devices. Get a SmartThings hub (very cheap), add all of your z wave devices and use the hombridge-SmartThings v2 plugin to connect the hub to HomeKit. Works like a charm for me.

Kevin

Sent via iPhone

On Jul 9, 2020, at 3:28 PM, tarunprakashsingh notifications@github.com wrote:

 Hello Yes just figured it out... home= stay and i set automation to lock and stuff on arm night Too... Zwave devices dont show up... as mentioned in the doc too... wish there was a way to get them too.. But this is cool thanks for working on them. Thanks TS

On Thu, Jul 9, 2020 at 3:25 PM Jacky Liang notifications@github.com wrote:

You can use the Homebridge plugin to Arm Away, Arm Stay, Arm Night and Disarm. If you have ADT sensors, you can view those sensor statuses and set automations for them.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub < https://github.com/mrjackyliang/homebridge-adt-pulse/issues/32#issuecomment-656307755 , or unsubscribe < https://github.com/notifications/unsubscribe-auth/AAFTGSICAJTMP7GF2UU4HBLR2YKQ3ANCNFSM4OVXXIPA

.

-- Thanks Tarun Singh

Like Us on Facebook CricketDepotOnline http://www.facebook.com/CricketDepotOnline Like Us on Facebook XTreme Cricket USA http://www.facebook.com/XtremeCricketUSA — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or unsubscribe.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/mrjackyliang/homebridge-adt-pulse/issues/32#issuecomment-656321240, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAFTGSPKIQQ276MF3MW4LHTR2YOILANCNFSM4OVXXIPA .

-- Thanks Tarun Singh

Like Us on Facebook CricketDepotOnline http://www.facebook.com/CricketDepotOnline Like Us on Facebook XTreme Cricket USA http://www.facebook.com/XtremeCricketUSA

-- Thanks Tarun Singh

Like Us on Facebook CricketDepotOnline http://www.facebook.com/CricketDepotOnline Like Us on Facebook XTreme Cricket USA http://www.facebook.com/XtremeCricketUSA

knedd commented 4 years ago

I have V3 and it works fine.

Kevin

Sent from my iPad

On Jul 9, 2020, at 4:14 PM, tarunprakashsingh notifications@github.com wrote:

 Smartthings hub is v4? V3 is 70$ and v4 bestbuy 119$ i think... Sounds right???

On Thu, Jul 9, 2020 at 4:03 PM Tarun Singh tarunprakashsingh@gmail.com wrote:

Ok i will try that.

On Thu, Jul 9, 2020 at 3:56 PM Kevin Nedd notifications@github.com wrote:

There is an easy way to intergrate z wave devices. Get a SmartThings hub (very cheap), add all of your z wave devices and use the hombridge-SmartThings v2 plugin to connect the hub to HomeKit. Works like a charm for me.

Kevin

Sent via iPhone

On Jul 9, 2020, at 3:28 PM, tarunprakashsingh notifications@github.com wrote:

 Hello Yes just figured it out... home= stay and i set automation to lock and stuff on arm night Too... Zwave devices dont show up... as mentioned in the doc too... wish there was a way to get them too.. But this is cool thanks for working on them. Thanks TS

On Thu, Jul 9, 2020 at 3:25 PM Jacky Liang notifications@github.com wrote:

You can use the Homebridge plugin to Arm Away, Arm Stay, Arm Night and Disarm. If you have ADT sensors, you can view those sensor statuses and set automations for them.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub < https://github.com/mrjackyliang/homebridge-adt-pulse/issues/32#issuecomment-656307755 , or unsubscribe < https://github.com/notifications/unsubscribe-auth/AAFTGSICAJTMP7GF2UU4HBLR2YKQ3ANCNFSM4OVXXIPA

.

-- Thanks Tarun Singh

Like Us on Facebook CricketDepotOnline http://www.facebook.com/CricketDepotOnline Like Us on Facebook XTreme Cricket USA http://www.facebook.com/XtremeCricketUSA — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or unsubscribe.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/mrjackyliang/homebridge-adt-pulse/issues/32#issuecomment-656321240, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAFTGSPKIQQ276MF3MW4LHTR2YOILANCNFSM4OVXXIPA .

-- Thanks Tarun Singh

Like Us on Facebook CricketDepotOnline http://www.facebook.com/CricketDepotOnline Like Us on Facebook XTreme Cricket USA http://www.facebook.com/XtremeCricketUSA

-- Thanks Tarun Singh

Like Us on Facebook CricketDepotOnline http://www.facebook.com/CricketDepotOnline Like Us on Facebook XTreme Cricket USA http://www.facebook.com/XtremeCricketUSA — You are receiving this because you commented. Reply to this email directly, view it on GitHub, or unsubscribe.

github-actions[bot] commented 8 months ago

This issue is now locked and considered resolved. If you have questions or inquiries, you may start a new issue.