mruiter
commented
6 months ago The trigger is a message from the sensor itself , not something homey or the app does by itself.To make sure you can open the zwave section when you log into https://tools.developer.homey.app/Then turn on logging in the zwave section and what’s filter the log on the device id of the sensor that’s triggering .If you see the message of the motion alert then it’s the sensor itself that’s misfiring.The v1 sensors are known to give this issue when the battery is near its end Verstuurd vanaf mijn iPhoneOp 21 dec 2023 om 20:40 heeft B3rt @.***> het volgende geschreven: I have 3 v1 z-wave pir sensors using on Homey 2023 and all 3 of them give during the daylight constant motion / no motion. When it turns dark this stops and the sensors works 'normal' The lux sensor works fine and has no issues. ee3275dc-5926-4d6b-bd6a-1523861b8b6c afbeelding.png (view on web) I also have 3 v3 sensors, these work fine and have no issues.
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you are subscribed to this thread.Message ID: @.***>
I have 3 v1 z-wave pir sensors using on Homey 2023 and all 3 of them give during the daylight constant motion / no motion. When it turns dark this stops and the sensors works 'normal' The lux sensor works fine and has no issues.
ee3275dc-5926-4d6b-bd6a-1523861b8b6c
I also have 3 v3 sensors, these work fine and have no issues.