search

msowenks / siphon

Automatically exported from code.google.com/p/siphon
0 stars 0 forks source link

No receive audio #61

Closed GoogleCodeExporter closed 9 years ago

GoogleCodeExporter commented 9 years ago 
What steps will reproduce the problem?
After I installed  beta 7, I was able to receive audio without issue. I 
made successful calls for a couple of hours without issue. Eventually the 
phone registration timed out and re-registered. After that I was no longer 
able to receive audio. I'm sniffing packets and not seeing anything out of 
the ordinary. In fact, I'm seeing rtp behind my access point going to the 
correct port. The phone is in a bad state. A reboot and port change on the 
phone had no effect. I'll power it down and let it rest a while. Have you 
seen this issue before?

What version of the product are you using? On what operating system?
Siphon beta 7, iphone 3G firmware 2.1 over wifi

Please provide any additional information below.

Original issue reported on code.google.com by surfs_u...@yahoo.com on 14 Oct 2008 at 2:58

GoogleCodeExporter commented 9 years ago 
Could you try do define proxy server parameters with the same value as server
parameters, i.e. <server sip provider> ?

Original comment by samuelv0...@gmail.com on 14 Oct 2008 at 9:08

GoogleCodeExporter commented 9 years ago 
That didn't work. My phone won't register with those parameters. I have 
"server" set 
to use the Domain of the user. Proxy server is set as my sbc.

Original comment by surfs_u...@yahoo.com on 15 Oct 2008 at 1:06

GoogleCodeExporter commented 9 years ago 
I grabbed the logs from phone and see the following error:

12:13:41.435 sip_transport_ Error setting SO_RCVBUF: No buffer space available 
[120055]
 12:13:41.435 sip_transport_ Error setting SO_SNDBUF: No buffer space available 
[120055]

I assume this is my problem. Have you seen this before?

Original comment by surfs_u...@yahoo.com on 17 Oct 2008 at 4:26

GoogleCodeExporter commented 9 years ago 
No these messages are not your problem.
It's weird because your system worked at beginning.
What is your provider ?
Could you post here or send me your  log file ?

Original comment by samuelv0...@gmail.com on 17 Oct 2008 at 11:33

GoogleCodeExporter commented 9 years ago 
Log file attached.

Original comment by surfs_u...@yahoo.com on 18 Oct 2008 at 5:31

Attachments:

GoogleCodeExporter commented 9 years ago 
Could you give the result with beta 8 ?

Original comment by samuelv0...@gmail.com on 18 Oct 2008 at 7:43

GoogleCodeExporter commented 9 years ago 
same problem. logs is attached.

Original comment by surfs_u...@yahoo.com on 19 Oct 2008 at 7:26

Attachments:

GoogleCodeExporter commented 9 years ago 
I mis-installed beta 8. After a re-install, the issue has been resolved

Original comment by surfs_u...@yahoo.com on 24 Oct 2008 at 3:02

GoogleCodeExporter commented 9 years ago 
Siphon beta 8

Original comment by samuelv0...@gmail.com on 11 Nov 2008 at 4:39