search

msr-consulting / exscalabar_server

Repository for the EXSCALABAR server.
http://www.msrconsults.com/ukmet-gh/exscalabar
0 stars 1 forks source link

TE Cooler not powering on or setting initial set point #111

Closed lo-co closed 8 years ago

lo-co commented 8 years ago

TE Cooler not setting set point at config, and nor powering on.

JustinLangridge commented 8 years ago

TE cooler is now powering on and we get back data but can not set the setpoint from the UI controls

lo-co commented 8 years ago

This is the TE Technology cooler right?

If this is functioning (on the server side) as expected, we will go ahead and close this. Raise a UI issue (if there is not one) for the setpoint.

There is a UI element for this, I will take a look and see what is going on with this.

JustinLangridge commented 8 years ago

We're getting temperatures back into the plot in the UI when all is powered up. Does this then suggest that the server side is working?

lo-co commented 8 years ago

Server side is working. Yes.

Regarding the UI side, have you tried setting the setpoint via the UI controls on the Housekeeping page?

JustinLangridge commented 8 years ago

Have tried setting set points on the UI and they don't do anything.

The setpoint initializes to 18 degrees but this probably doesn't have effect either as the TEC i controlling to 15 degrees.

We get data back in the UI though.