mtavengwa / slimdx

Automatically exported from code.google.com/p/slimdx
0 stars 0 forks source link

Cannot install SlimDX under .Net 3.5 Client Profile. #378

Closed GoogleCodeExporter closed 8 years ago

GoogleCodeExporter commented 8 years ago
The SlimDX November 2008 redistributable will not install on a computer
with only the .Net 3.5 Client Profile installed.

Here's some information about the Client Profile:

http://msdn.microsoft.com/en-us/library/cc656912.aspx

Original issue reported on code.google.com by holyfuzz...@gmail.com on 7 Dec 2008 at 7:41

GoogleCodeExporter commented 8 years ago
That is because the Client Profile is a trimmed down version of the .Net 
framework. 
It is specifically designed to be _small_. However, to make it small, something 
has 
got to go. If SlimDX relies on anything that was trimmed, then what would 
happen 
when you load an run you application?

My guess is that SlimDX requires the full .Net Framework. Other than a little 
saved 
space, why not install the full framework anyway? Perhaps to build network 
downloadable games, the consumer might not have to download the full framework. 
But 
with todays disk sizes and current we access speeds, is this really still an 
issue?

Original comment by Crystal_...@hotmail.com on 15 Jan 2009 at 8:45

GoogleCodeExporter commented 8 years ago
Yes, the Client Profile is a trimmed-down version of the .Net framework, but it 
cuts
mostly server-related libraries. I do not know of any reason why SlimDX would 
need
any of those advances libraries. If for some reason it *does*, then fine, but I
haven't heard anyone actually confirm that and explain what, in particular, 
SlimDX
requires.

The Client Profile is highly preferable for the substantial subset of users who 
have
a setup that qualifies for the Client Profile. It is only a couple dozen megs, 
while
the full framework can be upwards of a couple hundred -- even on my high-speed
connection, that can take an annoying amount of time, especially if I'm at a LAN
party or something similar and I want to get the game installed quickly. And 
even in
this day and age, some users *still* have dialup, not to mention other parts of 
the
world that lack the broadband penetration of the 1st-world.

Original comment by holyfuzz...@gmail.com on 15 Jan 2009 at 1:14

GoogleCodeExporter commented 8 years ago
The fact that SlimDX will not install on a computer with only the Client 
Profile 
installed should imply that there is something else that SlimDX is using that 
is 
needed.

Also note that this only affect Windows XP. Vista forward has the .Net 
Framework 
installed by default. I wonder what support for this Client Profile will be 
going 
forward?

Original comment by Crystal_...@hotmail.com on 15 Jan 2009 at 3:52

GoogleCodeExporter commented 8 years ago
This may just be a bug in the installer in detecting what version(s) of the 
.NET 
Framework are currently installed. I don't KNOW if SlimDX runs on this profile 
or 
not. I will try and do some virtual machine tests prior to the March release to 
see 
if this can be straightened out.

Original comment by promit....@gmail.com on 18 Jan 2009 at 2:51

GoogleCodeExporter commented 8 years ago
Tagging for March.

Original comment by Mike.Popoloski on 18 Feb 2009 at 8:36

GoogleCodeExporter commented 8 years ago
I am unable to repro in XP. I created an XP SP3 setup, and installed this:
http://www.microsoft.com/downloads/details.aspx?FamilyId=8CEA6CD1-15BC-4664-B27D
-
8CEBA808B28B&displaylang=en
SlimDX installs and runs afterwards. I will try Vista but I see no reason it 
would 
fail there...

Original comment by promit....@gmail.com on 12 Mar 2009 at 1:03

GoogleCodeExporter commented 8 years ago
So, SlimDX November will install on a completely untouched out of the box Vista 
install. I dunno what to tell you...no repro.

Original comment by promit....@gmail.com on 12 Mar 2009 at 1:32

GoogleCodeExporter commented 8 years ago
Hmm...

The client profile will only be installed on WinXP machines with *NO* .Net 
Framework
already installed. On Vista or if any version of .Net is already installed, the
client profile installer will actually install the full .Net 3.5. See the chart 
in
section 1.2 of:

http://download.microsoft.com/download/5/a/a/5aa86d6c-969b-42d8-bc6b-30e02bfeccf
0/NETFXClientProfile_DeploymentGuide.htm

Is it possible that the WinXP machine you tested on had some version of .Net 
already
installed?

I will test again when I have some time. Thanks.

Original comment by holyfuzz...@gmail.com on 12 Mar 2009 at 2:00

GoogleCodeExporter commented 8 years ago
Hate to resurrect an old issue... but I finally got around to testing again and 
have
been able to repro the issue.

My test platform is a clean install of WinXP SP3 on MS Virtual PC. I installed 
the
Client Profile using the installer found at the following link:

http://www.microsoft.com/downloads/details.aspx?FamilyId=8CEA6CD1-15BC-4664-B27D
-8CEBA808B28B&displaylang=en

Then I attempted to install SlimDX. Attached is a screenshot showing that the 
client
profile is indeed installed (and I can confirm by running an application 
compiled for
it) along with the error message generated by the SlimDX installer.

This is by no means a show-stopping issue, though it would be nice because a 
lot of
my users run WinXP w/o .Net installed and it takes quite a long time to 
download and
install the full version. But again, don't kill yourself over this one. ;-)

Just FYI, I'm not sure how you check for the existence of the full .Net 
framework in
the installer, but to check specifically for the client profile, you can check 
for
the existence of this registry path:

HKLM\SOFTWARE\Microsoft\NET Framework Setup\DotNetClient\v3.5

Thanks for all the hard work!

Original comment by holyfuzz...@gmail.com on 24 Jun 2009 at 1:19

GoogleCodeExporter commented 8 years ago
I think I forgot to attach the screenshot...

Original comment by holyfuzz...@gmail.com on 24 Jun 2009 at 1:21

Attachments:

GoogleCodeExporter commented 8 years ago
I think I found the problem...

Looking in Redist.wxs, it looks like these lines check for the .Net framework:

    <Condition Message="This application requires .NET Framework 2.0 or later. Please
install the .NET Framework then run this installer again.">
      <![CDATA[Installed OR NETFRAMEWORK20 OR NETFRAMEWORK35]]>
    </Condition>

According to http://wix.sourceforge.net/manual-wix3/wixnetfxextension.htm it 
looks
like you should simply be able to add add a NETFRAMEWORK35_CLIENT condition to 
those
above.

I'm not familiar with WiX, nor do I have the proper tools installed to compile 
it
myself, so I haven't tested this.

Original comment by holyfuzz...@gmail.com on 24 Jun 2009 at 2:10

GoogleCodeExporter commented 8 years ago
Re-opening for testing.

Original comment by promit....@gmail.com on 24 Jun 2009 at 2:46

GoogleCodeExporter commented 8 years ago
I agree with you that the problem is just the check for the .NET framework 
version, 
but of course I have to go through the whole VM song and dance, along with an 
installer build, to make sure. Le sigh.

Original comment by promit....@gmail.com on 24 Jun 2009 at 2:51

GoogleCodeExporter commented 8 years ago
If I send you a testing installer build in the next day or two, can you check 
to see 
if it works?

Original comment by promit....@gmail.com on 6 Jul 2009 at 7:50

GoogleCodeExporter commented 8 years ago
"If I send you a testing installer build in the next day or two, can you check 
to see 
if it works?"

- Of course!

Original comment by holyfuzz...@gmail.com on 6 Jul 2009 at 7:53

GoogleCodeExporter commented 8 years ago
Okay, this is a straight repack of the March redist with the new attribute 
added in. 
(NOT current code.) Let me know what happens.

Original comment by promit....@gmail.com on 6 Jul 2009 at 9:34

GoogleCodeExporter commented 8 years ago
Surprisingly it still does not work. Exact same error message.

Perhaps you need the NETFRAMEWORK35_CLIENT_SP_LEVEL flag as well? (Probably 
not, but
I don't have any other ideas.)

Original comment by holyfuzz...@gmail.com on 6 Jul 2009 at 9:50

GoogleCodeExporter commented 8 years ago
Okay, let's try this again. I think I missed an important line before.

Original comment by promit....@gmail.com on 7 Jul 2009 at 2:52

Attachments:

GoogleCodeExporter commented 8 years ago
It works! Thanks so much. This will make installing my game a much faster 
experience
for many users.

(This installer is simply the March 09 release repackaged, correct?)

Original comment by holyfuzz...@gmail.com on 7 Jul 2009 at 2:59

GoogleCodeExporter commented 8 years ago
Right, that's a straight repack of the Mar09 tag, with SP1 patches. Good thing 
I tag 
all the releases.

Original comment by promit....@gmail.com on 7 Jul 2009 at 3:22