5Ghz not transmitting the signal - RT-N56U_3.0.3.1v-027_full.zip

[GoogleCodeExporter]

What steps will reproduce the problem?
1. 5Ghz is not transmitting the signal
2. I was using 2.4Ghz private & guest network on when I switch on the 5Ghz i 
can see the light in the router its ON but when i search for my SSID for 5Ghz I 
cant see it.
3.

What is the expected output? What do you see instead?
Once I toggle the 5Ghz ON I should see the SSID for 5Ghz in my devices under 
wifi. but its not visible

What version of the product are you using? On what operating system?
RT-N56U_3.0.3.1v-027_full.zip 

Please describe the problem as detailed as it's possible.
If you have connection problem, then syslog file is required. (please do
attach it as a file)
Note that if there will be a poor problem description the issue status will
be changed to 'Invalid'!

I have implemented the new firmware "RT-N56U_3.0.3.1v-027_full.zip " In RT-N56U 
product. I was using 2.4Ghz private & guest network till now.when I switch on 
the 5Ghz i can see the light in the router its ON but when i search for my 5Ghz 
SSID I cant see it in the devices.

More over when the 5Ghz signal get ON there was a interception with internet 
which is already connected to 2.4Ghz wifi.

I have attached the print screen

Kindly let me know what may be the issue.

Thanks
Kanagasabai.k

Original issue reported on code.google.com by kanagasa...@gmail.com on 10 Dec 2012 at 6:54

Attachments:

• 5Ghz-network.JPG

[GoogleCodeExporter]

5GHZ works fine for me. Try changing channels. My Galaxy Nexus only sees my 
5GHZ network if I set my channel below 100.

Original comment by tiber...@gmail.com on 10 Dec 2012 at 8:08

[GoogleCodeExporter]

I am really sorry sorry for raising this issue, yes for me also I can able to 
deduct 5Ghz from my lenovo T420 laptop but I cant see in my Pantech burst 
mobile and from my desktop which has Netgear USB wifi access point.

But its fine I am really sorry to raise this issue, Please close it. This is 
false issue 

Once again i am really sorry for raising this issue with out proper analyse 
from my side.

Thanks 
sabai.K

Original comment by kanagasa...@gmail.com on 10 Dec 2012 at 8:29

[GoogleCodeExporter]

Can't confirm. It is reachable from devices. Check AP channel and make sure, 
that clients can work on this channel.

Original comment by d...@soulblader.com on 10 Dec 2012 at 9:02

• Changed state: Invalid

[GoogleCodeExporter]

Hi,

you can close this issue, I have wrongly raised it, I am really happy with
this firmware, Evey things works for me except ftp as i have discussed with
team they updated the ftp issue will be fixed in future release, So you can
close this issue.

i am sorry for troubling.

Original comment by kanagasa...@gmail.com on 10 Dec 2012 at 9:04

[GoogleCodeExporter]

Please, don't worry. That's ok! =)

Original comment by d...@soulblader.com on 10 Dec 2012 at 9:18