Feature request: Separate DHCP server for VPN & ipsec

[GoogleCodeExporter]

What steps will reproduce the problem?

Not really a "problem" per say. I just like to have my VPN clients to log on a 
different subnet than my LAN.

What is the expected output? What do you see instead?

Basically I find it useful to "isolate" my VPN client say in 10.x.x.x subnet 
and have the rest of my network in the 192.168.x.x subnet.

What version of the product are you using? On what operating system?

Latest "full" build vers. 3.4.3.6-064

Please describe the problem as detailed as it's possible.

Right now in the web interface, when you set up the "built-in" PPTP VPN server 
you only have the option to distribute addresses in the same IP range as your 
LAN. 

Also, I know it's already been pointed out, but it would be awesome to add 
ipsec capability in one of the next firmwares since LT2P on itself is totally 
unencrypted making it worthless and insecure to use unless you route your L2TP 
traffic inside an SSH tunnel.

Right now I'm sticking to my old (and not so secure either) PPTP server :)

Cheers! You guys did an awesome job anyway with that firmware. 

Original issue reported on code.google.com by fharbou...@gmail.com on 14 Aug 2013 at 1:21

[GoogleCodeExporter]

In next release of the firmware you may use "Allocate subnet for VPN tunnel".
You can compile the firmware yourself: 
https://code.google.com/p/rt-n56u/wiki/HowToMakeFirmware.

Original comment by Dr.Sydorenko.O on 15 Aug 2013 at 10:57

[GoogleCodeExporter]

Original comment by Dr.Sydorenko.O on 1 Sep 2013 at 1:54

• Changed state: Fixed