search

mtchang / rt-n56u

Automatically exported from code.google.com/p/rt-n56u
0 stars 0 forks source link

Port forwarding for 80 doesn't work #955

Closed GoogleCodeExporter closed 9 years ago

GoogleCodeExporter commented 9 years ago 
What steps will reproduce the problem?
1.Port forwarding configuration for port 80 has been configured properly.
2.Try to open the pages with public IP and port 80 from outside.

What is the expected output? What do you see instead?
The browser should be able to show the pages properly. But instead it shows: 
HTTP Error 504, Gateway Timeout.

What version of the product are you using? On what operating system?
Firmware version: 3.4.3.6-064    OS: Windows 7 Professional x64

Description:
When I forward port 8080 to the same local port and it works fine. I search the 
issue on internet and someone gives a solution for original firmware. Here is 
the page for reference: 
http://www.titam.ca/2012/04/setting-up-http-and-ftp-servers-behind.html. 
However I can not find option "Enable Web Access from WAN" in the custom 
firmware. Could you please add this option to make it working? Thanks.

Original issue reported on code.google.com by hudk2...@gmail.com on 25 Aug 2013 at 4:00

GoogleCodeExporter commented 9 years ago 
For clarification: Are you trying to port forward for a web server running on 
your computer or are you trying to configure your router from outside of your 
network?

Original comment by westonmy...@gmail.com on 26 Aug 2013 at 3:40

GoogleCodeExporter commented 9 years ago 
[deleted comment]
GoogleCodeExporter commented 9 years ago 
[deleted comment]
GoogleCodeExporter commented 9 years ago 
I set a web server up in my computer and I want to access this web server from 
internet with port 80. To make it work, following settings have been done.

1. Change "Port of Web Access from LAN" to 8123
2. Add port forwarding to let both port 80 and 8080 point to the same web 
server in my computer.
3. Config DDNS properly.

http://www.mydomainname.com:8080 can be opened from intranet and internet. But 
http://www.mydomainname.com can be opened only from intranet. The browser shows 
"HTTP Error 504: Gateway Timeout" when I try to open it from internet. 
According to the solution provided in 
http://www.titam.ca/2012/04/setting-up-http-and-ftp-servers-behind.html, 
"Enable Web Access from WAN" should be changed to NO. But I can not find this 
option in your custom firmware.

Original comment by hudk2...@gmail.com on 26 Aug 2013 at 10:30

GoogleCodeExporter commented 9 years ago 
The option "Enable Web Access from WAN" you can find at page 
http://my.router/Advanced_BasicFirewall_Content.asp

Original comment by Dr.Sydorenko.O on 28 Aug 2013 at 8:09

GoogleCodeExporter commented 9 years ago 
Thanks Dr.Sydorenko.O for your reply. I have tried the solution and it doesn't 
work on this firmware. Since I have changed Port of Web Access from WAN & LAN 
to 8123 and I'm also able to access router configuration UI with 
http://www.mydomainname.com:8123 from internet and intranet, the firmware 
should allow port 80 to be used for other purposes. This is a very important 
feature for me. Could you please look into this issue? Thanks a lot.

Original comment by hudk2...@gmail.com on 29 Aug 2013 at 8:37

GoogleCodeExporter commented 9 years ago 
I can not reproduce the problem.

Can your ISP disallow port 80 from Internet (some providers close ports like 
80, 25, 110, etc.)?

Original comment by Dr.Sydorenko.O on 1 Sep 2013 at 2:28

GoogleCodeExporter commented 9 years ago 
Hi Dr.Sydorenko.O, I think you are right because router configuration UI also 
can not use port 80 from internet. Please close this issue. Thanks a lot for 
your reply.

Original comment by hudk2...@gmail.com on 1 Sep 2013 at 4:55

GoogleCodeExporter commented 9 years ago

Original comment by Dr.Sydorenko.O on 2 Sep 2013 at 6:46