Router interface not accesible from WAN

[GoogleCodeExporter]

What steps will reproduce the problem?
1. Install Firmware: 3.4.3.6-068 
2. Go to Administration - System
3. Notice that there is no "Enable Web Access from WAN?"
4. Also router is not accesible from WAN

What is the expected output? What do you see instead?
I should see setting in menu and router should be accesible from WAN.
No setting appear and router is not accesible from WAN.

What version of the product are you using? On what operating system?
Firmware: 3.4.3.6-068 ; win 8

Please describe the problem as detailed as it's possible.
If you have connection problem, then syslog file is required. (please do
attach it as a file)
Note that if there will be a poor problem description the issue status will
be changed to 'Invalid'!

I also have ddns active, and runing. (VPN works)

Original issue reported on code.google.com by radu.d.s...@gmail.com on 20 Sep 2013 at 6:26

[GoogleCodeExporter]

you should find the settings for wan access here:

Advanced Settings -> Firewall -General

Original comment by chi0...@gmail.com on 20 Sep 2013 at 1:21

[GoogleCodeExporter]

Thanks for the reply.  Indeed,  they are there. 
In the meantime I also found that you can make it visible to WAN with Port 
Forwarding. It works in the same way. 

Thanks again. 

Original comment by radu.d.s...@gmail.com on 20 Sep 2013 at 7:17

[GoogleCodeExporter]

https://code.google.com/p/rt-n56u/wiki/CommonTips#Connect_to_router`s_WEB-interf
ace_using_SSH-tunnel

Original comment by Dr.Sydorenko.O on 21 Sep 2013 at 11:09

[GoogleCodeExporter]

Original comment by Dr.Sydorenko.O on 28 Oct 2013 at 9:19

• Changed state: Done