help!!!

[GoogleCodeExporter]

Use backtrac 5 r3 with fern wifi 1.8 alpha rt3070 usb wifi card and I have the 
following problem: when I start cookie hijackers put the check mark for passive 
mode I select wlan1 insert the password wpa2 and do start, light yellow light 
yellow in monitor mode, yellow lights flash twice and remain in status sniffing 
yellow light while the light remains red cookie detection buffer. use by 
another computer on the network in my accaunt facebook and not sniffing 
anything. Could you lend a hand? Thanks Nico P.S. sorry for my bad english

Original issue reported on code.google.com by nmand...@gmail.com on 24 Dec 2012 at 9:45

[GoogleCodeExporter]

Hi :),

The cookie hijacker currently does not support WPA, it only supports WEP and 
Open Networks (Networks without any key). Thats the reason why it is not 
detecting any packet.

Original comment by savioboy...@gmail.com on 24 Dec 2012 at 12:03

[GoogleCodeExporter]

I entered a wep key to my router and the cookie hijacker program still does not 
work. when I start cookie hijacker wlan01 put in monitor mode I select passive 
mode, insert the wep key, the first light turns yellow, the second light blinks 
four times and turns yellow, the third light remains red. I do not understand 
where wrong and how can I fix probblena. I know an operating system on which 
cookie hijacker has been tested and is working with version 1.8 and with what 
type of wireless card has been tested? There is a detailed guide on how to make 
cookie hijacker? thanks Nico

Original comment by nmand...@gmail.com on 24 Dec 2012 at 1:38

[GoogleCodeExporter]

there are some YouTube video tutorials that demonstrate how the cookie 
hijackers passive mode works, Here are some of the tutorials:

https://www.youtube.com/watch?v=Bi-8JRNpMqo

https://www.youtube.com/watch?v=lCaOeXQiTZs

Original comment by savioboy...@gmail.com on 26 Dec 2012 at 8:41

[GoogleCodeExporter]

I'm getting a doubt. It 'possible that my card alpha model GE-RT3070 is not 
compatible with cookie hijacker?

Original comment by nmand...@gmail.com on 27 Dec 2012 at 7:43

[GoogleCodeExporter]

P.S. when I close coockie hijaker I get an error window that says "Could not 
start ksmserver. Check your installation" and backtrack restarts. Could this be 
the problem?

Original comment by nmand...@gmail.com on 27 Dec 2012 at 6:37

[GoogleCodeExporter]

NO thats not the problem, infact i thought i had fixed that problem when 
shutting down cookie hijacker (i'll work on the shutdown issue) .. If the card 
is successfully placed on monitor mode when you are using it, then i don't 
think the problem is with your card. The program actually hops through the 
channels when it is working, You may sometimes have to leave the program to run 
for sometime before it gets the packets in passive mode, especially if there is 
not heavy traffic on the network.

Original comment by savioboy...@gmail.com on 27 Dec 2012 at 8:26

[GoogleCodeExporter]

the probble me raises doubts are as follows: the second led to coockie hijaker 
(sniffing status) only blinks 4 times remain yellow, while the third led 
(coockie detecnion) remains red and does not blink as in the video tutorial.
P.S. excuse my insistence but I saw that the program is very nice and I would 
love to make it work :-). regards Nico

Original comment by nmand...@gmail.com on 27 Dec 2012 at 9:43

[GoogleCodeExporter]

I hope in the operation of this software. Despite my best efforts I could not 
get it to work. I am very disappointed because I asked for help from those who 
created cookie hijackers and I was not given a valid help. I entered the world 
of Linux with enthusiasm but no one helps me .... I think I've met all the 
requirements that cookie hijackers demands. I hope that some people give me 
help in the enterprise. thanks

Original comment by nmand...@gmail.com on 3 Jan 2013 at 3:31

[GoogleCodeExporter]

The issue's tab is for reporting bugs, not all reports are fixed immediately, 
so sometimes you have to be patient.

I have worked on the program and added a channel selection option.
Try the program again using the new function to lock on a specific channel.

Original comment by saviob...@rocketmail.com on 13 Jan 2013 at 6:24

[GoogleCodeExporter]

cookie hijacker does not work.
I connect to my wifi network, I start hijaker cookies, you disconnect from my 
wifi network, I connect again back to my wifi network I start the attack, 
position it passive mode, channel 6 I put my network, I enter the password, I 
go on Start sniffing the cookie detection buffer LED remains red. We hope that 
you can solve this probblema. If you need further information let me know. 
regards Nicola

Original comment by nmand...@gmail.com on 14 Jan 2013 at 8:10

[GoogleCodeExporter]

Is the target channel using WEP or WPA Encryption?

Original comment by saviob...@rocketmail.com on 14 Jan 2013 at 10:07

[GoogleCodeExporter]

wep key and use channel 6.

Original comment by nmand...@gmail.com on 14 Jan 2013 at 12:02