Open alberto-escobar opened 3 years ago
Hello! I have same error with my blackpill board. I used stm32f401ccu6 controller. I try to flash the board in serial mode and with st-link programmer but also I have an error.
您好,邮件已经收到!!!!! 这是来自QQ邮箱的自动回复邮件。
Hello! I have same error with my blackpill board. I used stm32f401ccu6 controller. I try to flash the board in serial mode and with st-link programmer but also I have an error.
baseflight never supported anything other than STM32F103. Whatever you are running is not baseflight.
Hello, I am making a flight controller using a bluepill and interfacing with an FTDI board. In the past I have been able to flash and connect the board using baseflight. Now It seems I can only flash the board but I cannot connect after I have flashed it. Here is what I get when I attempt to connect to it:
15:34:37 -- Serial port successfully opened with ID: 36
15:34:47 -- No configuration received within 10 seconds, communication failed
15:34:48 -- Serial port successfully closed
Any insight would help. I have been taking the jumpers off the boot pins after flashing