feelfreelinux
commented
2 years ago What esp chip are you running? You need one with psram to have enough memory to run the system.
Open catarrer opened 2 years ago
feelfreelinux
commented
2 years ago What esp chip are you running? You need one with psram to have enough memory to run the system.
catarrer
commented
2 years ago I am using the Adafruit Esp32 D1 mini with the ESP32-WROVER-32 module.
feelfreelinux
commented
2 years ago Are you running the prebuilt version? Looks like some PSRAM configuration error
J-Wrobel
commented
1 year ago I stumbled into something similar, used prebuilt binary from 0.3.0 release. Log and esptools chip info in attachment. log.txt chip_info.txt
Edit: I did some more reading on the issues, in particular hardware and it turns out as mentioned also above that esp32 module needs additional PSRAM to work. My module being WROOM-32D seems to not have one, hence the error of reading PSRAM ID. Guess I need a different module ordered. Ref esp23 devkits
Hi, I tried to install Euphonium on ESP32.
getting this error after flashing from serial monitor:
ELF file SHA256: 7733f97eac86787c
Re-entered core dump! Exception happened during core dump! Rebooting... ets Jun 8 2016 00:22:57
rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:2 load:0x3fff0030,len:5624 load:0x40078000,len:14344 load:0x40080400,len:3680 entry 0x40080674 [0;32mI (27) boot: ESP-IDF v4.4-367-gc29343eb94 2nd stage bootloader[0m [0;32mI (27) boot: compile time 15:16:38[0m [0;32mI (27) boot: chip revision: 1[0m [0;32mI (31) boot_comm: chip revision: 1, min. bootloader chip revision: 0[0m [0;32mI (38) boot.esp32: SPI Speed : 40MHz[0m [0;32mI (43) boot.esp32: SPI Mode : DIO[0m [0;32mI (47) boot.esp32: SPI Flash Size : 4MB[0m [0;32mI (52) boot: Enabling RNG early entropy source...[0m [0;32mI (57) boot: Partition Table:[0m [0;32mI (61) boot: ## Label Usage Type ST Offset Length[0m [0;32mI (68) boot: 0 nvs WiFi data 01 02 00009000 00004000[0m [0;32mI (76) boot: 1 otadata OTA data 01 00 0000d000 00002000[0m [0;32mI (83) boot: 2 phy_init RF data 01 01 0000f000 00001000[0m [0;32mI (91) boot: 3 storage Unknown data 01 82 00010000 0007d000[0m [0;32mI (98) boot: 4 factory factory app 00 00 00090000 000aae60[0m [0;32mI (106) boot: 5 app OTA app 00 10 00140000 00298aa0[0m [0;32mI (113) boot: End of partition table[0m [0;32mI (117) boot_comm: chip revision: 1, min. application chip revision: 0[0m [0;32mI (125) esp_image: segment 0: paddr=00140020 vaddr=3f400020 size=68024h (426020) map[0m [0;32mI (286) esp_image: segment 1: paddr=001a804c vaddr=3ffbdb60 size=07120h ( 28960) load[0m [0;32mI (297) esp_image: segment 2: paddr=001af174 vaddr=40080000 size=00ea4h ( 3748) load[0m [0;32mI (299) esp_image: segment 3: paddr=001b0020 vaddr=400d0020 size=1756cch (1529548) map[0m [0;32mI (851) esp_image: segment 4: paddr=003256f4 vaddr=40080ea4 size=1cf48h (118600) load[0m [0;32mI (900) esp_image: segment 5: paddr=00342644 vaddr=50000000 size=00010h ( 16) load[0m [0;32mI (915) boot: Loaded app from partition at offset 0x140000[0m [0;32mI (915) boot: Disabling RNG early entropy source...[0m [0;32mI (927) psram: This chip is ESP32-D0WD[0m [0;31mE (927) psram: PSRAM ID read error: 0xffffffff[0m [0;31mE (928) cpu_start: Failed to init external RAM, needed for external .bss segment[0m
abort() was called at PC 0x40081951 on core 0
Backtrace:0x40082489:0x3ffe3ba00x400968e9:0x3ffe3bc0 0x4009c365:0x3ffe3be0 0x40081951:0x3ffe3c50 0x40079418:0x3ffe3c80 |<-CORRUPTED