Third-party packages are now ignored in coverage reporting. This solves a few problems:
Coverage will no longer report about other people’s code (issue 876). This is true even when using --source=. with a venv in the current directory.
Coverage will no longer generate “Already imported a file that will be measured” warnings about coverage itself (issue 905).
The HTML report uses j/k to move up and down among the highlighted chunks of code. They used to highlight the current chunk, but 5.0 broke that behavior. Now the highlighting is working again.
The JSON report now includes percent_covered_display, a string with the total percentage, rounded to the same number of decimal places as the other reports’ totals.
coverage-5.5
coverage combine has a new option, --keep to keep the original data files after combining them. The default is still to delete the files after they have been combined. This was requested in issue 1108 and implemented in pull request 1110. Thanks, Éric Larivière.
When reporting missing branches in coverage report, branches aren’t reported that jump to missing lines. This adds to the long-standing behavior of not reporting branches from missing lines. Now branches are only reported if both the source and destination lines are executed. Closes both issue 1065 and issue 955.
Minor improvements to the HTML report:
The state of the line visibility selector buttons is saved in local storage so you don’t have to fiddle with them so often, fixing issue 1123.
It has a little more room for line numbers so that 4-digit numbers work well, fixing issue 1124.
Improved the error message when combining line and branch data, so that users will be more likely to understand what’s happening, closing issue 803.
coverage-5.4
The text report produced by coverage report now always outputs a TOTAL line, even if only one Python file is reported. This makes regex parsing of the output easier. Thanks, Judson Neer. This had been requested a number of times (issue 1086, issue 922, issue 732).
The skip_covered and skip_empty settings in the configuration file can now be specified in the [html] section, so that text reports and HTML reports can use separate settings. The HTML report will still use the [report] settings if there isn’t a value in the [html] section. Closes issue 1090.
Combining files on Windows across drives now works properly, fixing issue 577. Thanks, Valentin Lab.
Fix an obscure warning from deep in the _decimal module, as reported in issue 1084.
Fix: adapt to pypy3.9's decorator tracing behavior. It now traces function
decorators like CPython 3.8: both the @-line and the def-line are traced.
Fixes issue 1326_.
Debug: added pybehave to the list of :ref:cmd_debug and
:ref:cmd_run_debug options.
Fix: show an intelligible error message if --concurrency=multiprocessing
is used without a configuration file. Closes issue 1320_.
Fix: deadlocks could occur when terminating processes. Some of these
deadlocks (described in issue 1310_) are now fixed.
Fix: a signal handler was being set from multiple threads, causing an error:
"ValueError: signal only works in main thread". This is now fixed, closing
issue 1312_.
Fix: --precision on the command-line was being ignored while considering
--fail-under. This is now fixed, thanks to
Marcelo Trylesinski <pull 1317_>_.
Fix: releases no longer provide 3.11.0-alpha wheels. Coverage.py uses CPython
internal fields which are moving during the alpha phase. Fixes issue 1316_.
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.
Dependabot commands and options
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
Bumps coverage from 5.3.1 to 6.3.3.
Release notes
Sourced from coverage's releases.
Changelog
Sourced from coverage's changelog.
... (truncated)
Commits
99ab688
docs: latest samplec01fc71
build: prep for 6.3.3ce2d4ec
build: don't make wheels for pre-release Pythonsa9ecd8a
build: add markdown summary to the action3e6ff4f
chore: make upgradee5b91eb
test: skip tests that fail until CPython #92236 is fixed956f0fd
fix: fix compilation errors on latest 3.11.09097c0d
debug: incidental debug improvements in tracer.c45ba7e7
build(deps): bump docker/setup-qemu-action from 1 to 2 (#1372)9ef7d3c
build: Set permissions for GitHub actions (#1369)Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting
@dependabot rebase
.Dependabot commands and options
You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)