Closed lpt2007 closed 5 years ago
Probably it will work. Basically you need bash, X and Docker on arm, and afaik they all exist e.g. in Raspian. I did not test it myself because I dont have a Raspberry Pi.
I assume docker images will have to be based on arm images, too. Most Docker images (and all of x11docker examples) are based on amd64.
If you give it a try, I'd quite appreciate your feedback!
I will gladly try if you give me how to directions.
Hi @lpt2007! Do you actually have an ARM device with docker installed and running? Should it be an aarch64, you can try:
x11docker aptman/dbhi:bionic-aarch64 gtkwave
Otherwise, please let us know what did you achieve so far.
Yes, I have docker up and running on my arm device - os raspbian (debian stretch 9.6). But I don't know what you mean with that?
x11docker aptman/dbhi:bionic-aarch64 gtkwave
Do you run raspbian with an X server / a graphical interface?
Install x11docker in raspbian. The command x11docker aptman/dbhi:bionic-aarch64 gtkwave
should download image aptman/dbhi:bionic-aarch64
and start the application gtkwave
in docker.
If you have arch32 instead of arch64, you can e.g. try to build an image with this Dockerfile:
FROM arm32v7/debian
RUN apt-get update
RUN apt-get install xterm
Run the image with x11docker imagename xterm
.
Yes I have raspbian with X server and graphical interface.
But I don't have x11docker. Command not found?
I have this cpu: pi@raspberrypi:~ $ cat /proc/cpuinfo processor : 0 model name : ARMv7 Processor rev 4 (v7l) BogoMIPS : 38.40 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4
processor : 1 model name : ARMv7 Processor rev 4 (v7l) BogoMIPS : 38.40 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4
processor : 2 model name : ARMv7 Processor rev 4 (v7l) BogoMIPS : 38.40 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4
processor : 3 model name : ARMv7 Processor rev 4 (v7l) BogoMIPS : 38.40 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4
Hardware : BCM2835 Revision : a02082 Serial : 0000000015fde596
But I don't have x11docker. Command not found?
Well, to use x11docker you need to install x11docker first. Look at installation instructions in the README.
I installed x11docker successfully.
Now I try to run program with it like you say:
x11docker aptman/dbhi:bionic-aarch64 gtkwave
And I get this error:
It looks like x11docker has an issue to run xterm. It would do that to ask for pulling the docker image. Please try to pull the image first before running x11docker:
docker pull aptman/dbhi:bionic-aarch64
However, if I understand your /proc/cpuinfo correctly, you have a 32-bit arm cpu. For that reason the image may fail anyway. In that case, try to build a 32-bit-image, e.g. with this Dockerfile:
FROM arm32v7/debian
RUN apt-get update
RUN apt-get install xterm
This might be slightly off-topic, but I hope @mviereck will agree with discussing it.
I thought that docker is not available on 32-bit systems. See https://docs.docker.com/install/linux/docker-ce/binaries/. Certainly, I have successfully used docker on several ARMv8 devices (ROCK960, Pine64, and Raspberry Pi 3 B+), but I have always used 64-bit OSs. I have had some issues with outdated kernel versions, indeed.
Hence, I wonder how is it possible to install docker on a BCM2835 device (which should be either a Raspberry Pi 2 or a Zero). @lpt2007, I'd be so glad if your could tell us some details about the context/procedure:
apt
or apt-get
? Did you add any repository to do so?docker-io
or docker-ce
?About this issue, you should try with a arm32v7/debian
based image, as suggested by @mviereck.
Hi,
Sorry for delay: I am using this model of rpi: https://www.raspberrypi.org/products/raspberry-pi-3-model-b/
It has Quad Core 1.2GHz Broadcom BCM2837 64bit CPU.
but I think raspbian software is 32bit.
I installed docker with this command:
curl -fsSL get.docker.com -o get-docker.sh && sh get-docker.sh
and add pi user to docker group
sudo usermod -aG docker pi
I also installed docker on raspberry pi 2 with no problem.
For example: send me x11docker command to start firefox.
For example: send me x11docker command to start firefox.
You need a Docker image with firefox. Steps for creation:
~/docker
.~/docker/firefox
~/docker/firefox/Dockerfile
with this content:
FROM arm32v7/debian
RUN apt-get update
RUN apt-get install -y firefox
CMD firefox
docker build -t firefox ~/docker/firefox
x11docker firefox
I get error when running docker build:
pi@raspberrypi:~ $ docker build -t firefox /home/pi/docker/firefox
Sending build context to Docker daemon 2.048kB
Step 1/4 : FROM arm32v7/debian
---> 31b88b200ce6
Step 2/4 : RUN apt-get update
---> Running in 46bec2cdcccb
Get:1 http://security-cdn.debian.org/debian-security stretch/updates InRelease [94.3 kB]
Ign:2 http://cdn-fastly.deb.debian.org/debian stretch InRelease
Get:3 http://cdn-fastly.deb.debian.org/debian stretch-updates InRelease [91.0 kB]
Get:4 http://cdn-fastly.deb.debian.org/debian stretch Release [118 kB]
Get:5 http://cdn-fastly.deb.debian.org/debian stretch Release.gpg [2434 B]
Get:6 http://security-cdn.debian.org/debian-security stretch/updates/main armhf Packages [453 kB]
Get:7 http://cdn-fastly.deb.debian.org/debian stretch-updates/main armhf Packages [5108 B]
Get:8 http://cdn-fastly.deb.debian.org/debian stretch/main armhf Packages [6919 kB]
Fetched 7682 kB in 24s (316 kB/s)
Reading package lists...
Removing intermediate container 46bec2cdcccb
---> 93997b1246f0
Step 3/4 : RUN apt-get install -y firefox
---> Running in d29e1fd6c3ff
Reading package lists...
Building dependency tree...
Reading state information...
Package firefox is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package 'firefox' has no installation candidate
The command '/bin/sh -c apt-get install -y firefox' returned a non-zero code: 100
Firefox is not named firefox
in Debian. Try iceweasel
or firefox-esr
:
Firefox is not named firefox in Debian. Try iceweasel or firefox-esr:
Oh, yes, I forgot about that. Change the Dockerfile to:
FROM arm32v7/debian
RUN apt-get update
RUN apt-get install -y firefox-esr
CMD firefox-esr
Finally a success.
I try to run kodi like this:
make folder /home/pi/docker
make sub-folder under it /home/pi/docker/kodi
make file called Dockerfile under kodi folder /home/pi/docker/kodi/Dockerfile
FROM arm32v7/debian
RUN apt-get update
RUN apt-get install -y kodi
CMD kodi
create image: docker build -t kodi /home/pi/docker/kodi
Run image with x11docker kodi
KODI started ok, but using a lot of CPU.
Can something be done about that?
KODI started ok, but using a lot of CPU. Can something be done about that?
Add option --gpu
for hardware acceleration: x11docker --gpu kodi
Finally a success.
:-) Good to know that x11docker also works on arm / Raspberry. Thank you for testing!
:-) Good to know that x11docker also works on arm / Raspberry. Thank you for testing!
Anytime.
I try to run with --gpu. I still have high cpu usage all forur cpu-s about 90%.
error:
Can you somehow provide terminal output as text instead of an image? It is hard to read, and I donT recognice the error.
Does your Raspberry have a GPU at all? If yes, there should be some files in /dev/dri
.
Please show me the output of: lspci | grep -i vga
Does your Raspberry have a GPU at all?
Yes. GPU: Broadcom VideoCore IV
Please show me the output of: lspci | grep -i vga
command not working:
pi@raspberrypi:~ $ lspci | grep -i vga
pcilib: Cannot open /proc/bus/pci
lspci: Cannot find any working access method.
Maybe arm32v7/debian is not made for rpi?
Maybe because of that kodi is taking a lot of resurces.
Can I somehow build docker image from raspbian I running right now? I try to install & run kodi on it and is working perfectly.
I am using this model of rpi: raspberrypi.org/products/raspberry-pi-3-model-b
It has Quad Core 1.2GHz Broadcom BCM2837 64bit CPU.
but I think raspbian software is 32bit.
Just for clarification. ARMv8 devices, such as BCM2837, support two architectures: ARMv7 (32-bit) and ARMv8 (64-bit). Since Raspbian is meant to work in any RPi, it is compiled for ARMv7 only. That's why /proc/cpuinfo
returns BCM2835: the ARMv8 subset is hidden for Raspbian. As a result, 64-bit features are not available in RPi 3 when Raspbian is used. Also, this is why arm32v7
docker images must be used as a base.
However, should any 64-bit OS be used in the RPi 3 (such as Fedora, Arch or Alpine), images based on arm64v8
would work. Still, I wonder if arm32v7
images can be executed on a 64-bit OS.
curl -fsSL get.docker.com -o get-docker.sh && sh get-docker.sh
and add pi user to docker groupsudo usermod -aG docker pi
Thanks! I used to follow this: https://docs.docker.com/install/linux/docker-ce/debian/ But it does not have a section for Raspbian, although binaries exist: https://download.docker.com/linux/
Now I used curl -fsSL get.docker.com | sh -
and it worked like a charm.
:-) Good to know that x11docker also works on arm / Raspberry. Thank you for testing!
Do you think it'd be interesting to keep a file/table where contributors can report which platforms they tried x11docker at?
Please show me the output of: lspci | grep -i vga
command not working:
The Raspberry Pi is based on a system-on-chip (SoC), so there is probably no PCI bus at all. See https://en.wikipedia.org/wiki/File:ARMSoCBlockDiagram.svg for an example of how these devices look like.
Maybe arm32v7/debian is not made for rpi?
I think that arm32v7
and arm64v8
images have been developed precisely for RPi and single-board-computers (SBCs) in the context of IoT. So, the context fits perfectly.
However, on the one hand, the main purpose of SBCs in general, and RPis in particular, is not to execute resource hungry graphical applications. It can be done, for sure. But you should expect performance issues.
Maybe because of that kodi is taking a lot of resurces.
Kodi is probably taking a lot of resources because it needs to. If you tried kodi outside of a docker container and it works with less resources, then we should focus on the constraints that the docker container imposes. The main constraint can be GPU acceleration, as @mviereck pointed above. We should help clarify:
Can I somehow build docker image from raspbian I running right now? I try to install & run kodi on it and is working perfectly.
I'd say that the GPU is being used in raspbian, but not inside the container. If so, making some arm32v7/raspbian
won't make any difference. This is specially so because Raspbian is based on Debian. However, once we guess how to share the GPU, some files from Raspbian (such as drivers) might need to be added to the container.
@lpt2007 did you try this?
FROM arm32v7/debian
RUN apt-get update
RUN apt-get install -y firefox-esr
CMD firefox-esr
or did you try kodi directly?
FROM arm32v7/debian
RUN apt-get update
RUN apt-get install -y kodi
CMD kodi
I can successfully start kodi (and I can reproduce the performance issue), but firefox seems not to work.
We should help clarify:
- Is GPU acceleration available in Raspbian?
@lpt2007 Please show the output of: ls -l /dev/dri
This folder is shared with the container and should give it access to the GPU hardware.
However, once we guess how to share the GPU, some files from Raspbian (such as drivers) might need to be added to the container.
Add this line to the Dockerfile, it may add some drivers:
RUN apt-get install -y mesa-utils mesa-utils-extra
Do you think it'd be interesting to keep a file/table where contributors can report which platforms they tried x11docker at?
Currently I would only know of amd64 and now arm/RaspBerry. I am not sure what else could be of interest.
Please show the output of:
ls -l /dev/dri
This does not exist in 2018-11-13-raspbian-stretch
.
Currently I would only know of amd64 and now arm/RaspBerry. I am not sure what else could be of interest.
There are multiple ARM devices with different GPUs. Since x11docker is quite focused on GUI applications, I think it might be interesting to track with which distributions and boards we can enable --gpu
.
I could run tests on RPi 2 B, RPi 3 B+, PYNQ, ROCK960, Pine64 and Orange Pi Plus2.
@lpt2007 did you try this?
FROM arm32v7/debian RUN apt-get update RUN apt-get install -y firefox-esr CMD firefox-esr
I try but not working?
With the kodi Dockerfile above:
./x11docker --gpu kodi
x11docker note: Using X server option --hostdisplay
x11docker note: To allow GPU acceleration (option --gpu) with --hostdisplay,
x11docker will allow trusted cookies. That enables option --clipboard, too.
x11docker note: To allow --hostdisplay with trusted cookies,
x11docker must share host IPC namespace with container (option --hostipc)
to allow shared memory for X extension MIT-SHM.
x11docker note: To allow protection against X security leaks,
please install one or more of:
xpra, Xephyr, nxagent, weston+Xwayland, kwin_wayland+Xwayland or Xnest,
or run a second Xorg server with option --xorg.
x11docker WARNING: Option --hostdisplay with trusted cookies provides
QUITE BAD CONTAINER ISOLATION !
Keylogging and controlling host applications is possible!
It is recommended to use another X server option like --xpra or --nxagent.
x11docker WARNING: Option --hostipc degrades container isolation.
IPC namespace remapping is disabled.
x11docker WARNING: Option --gpu degrades container isolation.
Container gains access to GPU hardware.
This allows reading host window content (palinopsia leak)
and GPU rootkits (compare proof of concept: jellyfish).
/usr/lib/arm-linux-gnueabihf/kodi/kodi-xrandr: Failed to get size of gamma for output default
libEGL warning: DRI2: failed to authenticate
/usr/lib/arm-linux-gnueabihf/kodi/kodi-xrandr: Failed to get size of gamma for output default
I get the same output after adding these mesa-utils mesa-utils-extra
.
This does not exist in 2018-11-13-raspbian-stretch.
In that case I don't know how to provide GPU access at all. On amd64 this folder is the key.
There are several raspbian images on docker hub. Maybe its worth a try to change the base image in Dockerfile to FROM schachr/raspbian-stretch
libEGL warning: DRI2: failed to authenticate
This one looks interesting. It is a GPU related error. However, I've never heard of any authentication to access the GPU. X access is allowed with XAUTHORITY
cookie, and GPU access is allowed with group video
.
I also try with raspbian/stretch:
FROM raspbian/stretch
RUN apt-get update
RUN apt-get install -y kodi
CMD kodi
But kodi won't start. Here is log file: x11docker.log
This one looks interesting. It is a GPU related error. However, I've never heard of any authentication to access the GPU. X access is allowed with XAUTHORITY cookie, and GPU access is allowed with group video.
Maybe this is authentication cookie problem:
xauth list
and add cookie to container
xauth add (coockie get from command xauth list)
What that error mean:
/usr/bin/kodi: 46: /usr/bin/kodi: tvservice: not found
/usr/lib/arm-linux-gnueabihf/kodi/kodi_v7.bin: error while loading shared libraries: libbrcmGLESv2.so: cannot open shared object file: No such file or directory
/usr/bin/kodi: 60: /usr/bin/kodi: tvservice: not found
What that error mean:
It looks that kodi is missing some packages. tvserver
sounds rather harmless.
libbrcmGLESv2.so
sounds more important. GLES
(and EGL
) is always related to the GPU.
Add this line to the Dockerfile and build again, it may add some GPU drivers:
RUN apt-get install -y mesa-utils mesa-utils-extra
I try but not working?
It was failing, but I now built the image again and it seems to work. Strange... I installed firefox in the host meanwhile, so it might have something to do. I will try again with a fresh raspbian.
Maybe its worth a try to change the base image in Dockerfile to
FROM schachr/raspbian-stretch
It tried:
pi@raspberrypi:~/x11docker $ ./x11docker --user=root -i --gpu schachr/raspbian-stretch bash
x11docker note: Using X server option --hostdisplay
x11docker note: To allow GPU acceleration (option --gpu) with --hostdisplay,
x11docker will allow trusted cookies. That enables option --clipboard, too.
x11docker note: To allow --hostdisplay with trusted cookies,
x11docker must share host IPC namespace with container (option --hostipc)
to allow shared memory for X extension MIT-SHM.
x11docker note: To allow protection against X security leaks,
please install one or more of:
xpra, Xephyr, nxagent, weston+Xwayland, kwin_wayland+Xwayland or Xnest,
or run a second Xorg server with option --xorg.
x11docker WARNING: Option --hostdisplay with trusted cookies provides
QUITE BAD CONTAINER ISOLATION !
Keylogging and controlling host applications is possible!
It is recommended to use another X server option like --xpra or --nxagent.
x11docker WARNING: Option --hostipc degrades container isolation.
IPC namespace remapping is disabled.
x11docker WARNING: Option --gpu degrades container isolation.
Container gains access to GPU hardware.
This allows reading host window content (palinopsia leak)
and GPU rootkits (compare proof of concept: jellyfish).
'/etc/skel/./.bash_logout' -> '/fakehome/root/./.bash_logout'
'/etc/skel/./.bashrc' -> '/fakehome/root/./.bashrc'
'/etc/skel/./.profile' -> '/fakehome/root/./.profile'
root@70682431a3bd:~# apt update -y && apt install -y kodi && kodi
...
/usr/lib/arm-linux-gnueabihf/kodi/kodi-xrandr: Failed to get size of gamma for output default
libEGL warning: DRI2: failed to authenticate
This might be related: https://github.com/tipam/pi3d/issues/177
libEGL warning: DRI2: failed to authenticate
Just an idea: As there is no /dev/dri
that could be used for GPU access, try with --privileged
to allow hardware access in general. E.g. x11docker --gpu -- --privileged -- kodi
If it still fails, it is most probably a missing driver in image.
In that case I don't know how to provide GPU access at all. On amd64 this folder is the key.
Is this useful for you? https://www.balena.io/blog/raspberry-pi-gpu-for-containers/
I'm going to try https://hub.docker.com/r/resin/armv7hf-debian and https://hub.docker.com/r/balenalib/armv7hf-debian. Note that resin.io
has ben renamed to balena.io
.
Just an idea: As there is no /dev/dri that could be used for GPU access, try with --privileged to allow hardware access in general. E.g. x11docker --gpu -- --privileged -- kodi
I will try.
What that error mean:
/usr/bin/kodi: 46: /usr/bin/kodi: tvservice: not found /usr/lib/arm-linux-gnueabihf/kodi/kodi_v7.bin: error while loading shared libraries: libbrcmGLESv2.so: cannot open shared object file: No such file or directory /usr/bin/kodi: 60: /usr/bin/kodi: tvservice: not found
I can confirm this with raspbian/stretch
.
Just an idea: As there is no /dev/dri that could be used for GPU access, try with --privileged to allow hardware access in general. E.g. x11docker --gpu -- --privileged -- kodi
Not working. Same error libbrcmGLESv2.so.
Is this useful for you? https://www.balena.io/blog/raspberry-pi-gpu-for-containers/
This looks promising. I am still reading, but this is worth a test already:
x11docker --gpu -- --pid=host -- kodi
If that fails, try:
x11docker --gpu -- --privileged --pid=host -- kodi
With x11docker --gpu -- --privileged -- kodi
, where the image is https://github.com/mviereck/x11docker/issues/100#issuecomment-455897999, it works without GPU acceleration and I get libEGL warning: DRI2: failed to authenticate
. The same with x11docker --gpu -- --pid=host -- kodi
and with x11docker --gpu -- --pid=host --privileged -- kodi
.
Please try to with additional MESA installation, it might be still just a missing driver:
RUN apt-get install -y mesa-utils mesa-utils-extra
Further test runs should always include --gpu -- --pid=host --privileged --
to reduce possible sources for issues.
I add this in Dockerfile:
FROM raspbian/stretch
RUN apt-get update
RUN apt-get upgrade -y
RUN apt-get install -y kodi
RUN apt-get install libraspberrypi0 -y
CMD kodi
This command solves error libbrcmGLESv2.so.
RUN apt-get install libraspberrypi0 -y
Now with this command kodi starts ok.
x11docker --gpu -- --privileged -- kodi
CPU usage looks normal. I have HDMI-CEC control over kodi with my tv remote, but I lost my keyboard. AUDIO is working ok. How to get keyboard working under kodi?
Does it also work without --privileged
?
If audio is lost without --privileged
, add option --alsa
x11docker --gpu --alsa kodi
How to get keyboard working under kodi?
That is strange, I have no idea why the keyboard is lost yet.
I try to play movie from my network and audio sims to be ok but picture is not ok (squares on picture, choppy picture). I think is not cpu problem, because is very low when I playing movie.
Any idea?
x11docker --gpu --alsa kodi
No kodi won't start without --privileged
No kodi won't start without --privileged
It does not start at all? That's odd, because your previous image based on arm32v7/debian
did run without --privileged
.
I try to play movie from my network and audio sims to be ok but picture is not ok (squares on picture, choppy picture). I think is not cpu problem, because is very low when I playing movie.
Can you compare with kodi directly installed on the RaspBerry (not in Docker image)? Just to clarify if the issue is related to Docker. It might be as well a general network issue.
$ x11docker --gpu -i --user=root -- --pid=host --privileged -- <image> bash
It is based on Jessie, so kodi is not available.
root@ad30d9a3384c:~# kodi
/usr/lib/arm-linux-gnueabihf/kodi/kodi-xrandr: Failed to get size of gamma for output default
libEGL warning: DRI2: failed to authenticate
libEGL warning: DRI2: failed to open swrast (search paths /usr/lib/arm-linux-gnueabihf/dri:${ORIGIN}/dri:/usr/lib/dri)
terminate called after throwing an instance of 'std::logic_error'
what(): basic_string::_M_construct null not valid
Aborted (core dumped)
Crash report available at /fakehome/root/kodi_crashlog-20190120_232325.log
root@ad30d9a3384c:~# apt install libraspberrypi0 -y
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package libraspberrypi0
kodi
is available, but it does not work. libraspberrypi0
is not available.
/usr/bin/kodi: 1: /usr/bin/kodi: fbset: not found
/usr/bin/kodi: 46: /usr/bin/kodi: tvservice: not found
/usr/bin/kodi: 60: /usr/bin/kodi: tvservice: not found
Both kodi
and libraspberrypi0
are available.
It complains about fbset
and tvservice
, but it works.
/usr/lib/arm-linux-gnueabihf/kodi/kodi-xrandr: Failed to get size of gamma for output default
libEGL warning: DRI2: failed to authenticate
kodi
is available, and it does work. libraspberrypi0
is not available.
root@0358016a4b96:~# kodi
/usr/lib/arm-linux-gnueabihf/kodi/kodi-xrandr: Failed to get size of gamma for output default
libEGL warning: DRI2: failed to authenticate
/usr/lib/arm-linux-gnueabihf/kodi/kodi-xrandr: Failed to get size of gamma for output default
kodi
is available, and it does work. libraspberrypi0
is not available.
Little update. I could install libraspberrypi0
on armv7/debian
:
Add these to /etc/apt/sources.list
:
deb http://archive.raspbian.org/raspbian stretch main contrib non-free rpi firmware
deb http://archive.raspberrypi.org/debian stretch main
Then:
apt install -y wget gnupg
wget https://archive.raspbian.org/raspbian.public.key -O - | apt-key add -
wget http://archive.raspberrypi.org/debian/raspberrypi.gpg.key -O - | apt-key add -
apt update -y
apt install -y libraspberrypi0
However, kodi is still using the CPU. I tried adding the packages mentioned in hypriot/x11-on-HypriotOS#2 too. Still the same. I think I am missing some command to reload something after the packages are installed.
However, kodi is still using the CPU. On my solution cpu is ok.
But I can't get rid of choppy video:
I run this command:
x11docker --gpu --homedir /home/pi/docker/raspbian/ -- --privileged -- kodi-new
But I can't get rid of choppy video:
Maybe you have missed my comment above: Can you compare with kodi directly installed on the RaspBerry (not in Docker image)? Just to clarify if the issue is related to Docker. It might be as well a general network issue.
If network transfer in general is an issue, x11docker can't do anything about it. If the choppy video only appears within docker, but not with a native kodi installation, we can look for a better docker setup.
Maybe you have missed my comment above: Can you compare with kodi directly installed on the RaspBerry (not in Docker image)? Just to clarify if the issue is related to Docker. It might be as well a general network issue.
Directly runs ok.
Directly runs ok.
ok. I have no idea yet for a different command setup. But maybe installing some X video libraries helps. Add this line to the Dockerfile and build again:
RUN apt-get install -y libxv1 libxvmc1
Is this working on arm cpu like raspberry pi?