Open petrvanekrobe opened 3 years ago
I think the IP thing is a good thing. I'm just doing over audio, and I think this is part of every data sheet there as well. Mentioning the IP def seems to be easy!
We can add them to the
PhysicalDescriptions.Properties
This section defines the general properties of the device type (XML node
<Properties>
). The Properties Collect currently does not have any XML
attributes. The currently defined children nodes of properties collect
are specified in table 28.
Max. static load IK Rating
Sound pressure level: 27 dB(A) at 1 m (quiet mode) 42 dB(A) at 1 m (auto mode) Sound power level: 35 dB(A) (quiet mode) 50 dB(A) (auto mode)
We want
BTU can be calculated, But petr checks
BTU can be calculated, so we will not add this.
Robe defined data: Min. distance from flammable materials: 1 m is a required information about distance from flammable materials based on surface temperature of the fixture's housing. This is defined in EN IEC 60598-2-17 part 2-17, section 17.6.4 - minimal distance from flammable materials of all outer surfaces of the device.
Robe defined data: Min. distance of illuminated objects: 18 m is a required information about distance on which the fixture could make illuminated surface warmer then 90°. This is defined in EN IEC 60598-1, part 1, section 3.2.13. Often accommodated by this picture:
Data with examples:
Minimum distances Min. distance from flammable surfaces: 1 m Min. distance to lighted object: 3 m
Total heat dissipation: 3240 BTU/hr (calculated)
Ingress protection rating: • CE: IP 67 • US: Suitable for wet location
Max. static load (Used for inground devices) • Standard tempered glass: 45kN • Antiskid tempered glass: 23kN
Cooling system • Convection • Forced air