Closed vinch9292 closed 1 month ago
With the information you provide it is a bit complicated to help you. I advise you to reread the wiki (especially the part Configure the routing within OpenWRT) and reproduce step by step what it indicates, if you do it as it should work.
And make sure that you have checked the "Allow Ethernet Bridging" option at https://my.zerotier.com/ for your router in the member list, it is a very common mistake that is often forgotten.
thanks for the help. i did checked "Allow Ethernet Bridging" for the router, but do I also need to check AEB for external ZT clients?
but do I also need to check AEB for external ZT clients?
No. That option is only checked in the member that is going to act as a bridge, in this case the OpenWrt router.
RDP to the windows is working but still cant access the NAS. NAS was setup for intranet only, no internet connection. the idea was to remote access the NAS locally through ZT.
You may have a firewall on your NAS that only allows connections from the range of your local network. You have to allow also in that firewall the range of your Zerotier network for everything to work.
i follow the exact instruction here to setup the zerotier on router with openwrt 22.xx. I can only access and ping the router only, but not devices within the local LAN network. i had search all over the internet but still didn't find any workable solutions. please kindly help. Thanks