search

mwganson / ThreadProfile

Create 2d thread profile for sweeping along helix in Part or Part Design workbenches
GNU Lesser General Public License v2.1
40 stars 8 forks source link

cannot find ThreadProfile icon #48

Closed Patsjemoe closed 2 years ago

Patsjemoe commented 2 years ago

Hi, I installed ThreadProfile 1.82.0, as described, restarted Freecad, but cannot find any toolbar icon to start.... please advise where to find it. regards Ludo

mwganson commented 2 years ago

You must open the workbench first in order to see the toolbar icons.

Patsjemoe commented 1 year ago

Hi Mark, I managed to see them. But doing the install by the install button (freecad 0.20) seems not to be sufficient. I had to add https://github.com/mwganson/ThreadProfile to the custom repositories section.. but there is no configure icon......have put it in the preference packs part, then open it in the workbench, and then open part design....then it shows up....it seems I have to do that every time. will test it tomorrow. thanks for your help regards Ludo

On Tue, 23 Aug 2022 at 20:21, Ludo Kustermans @.***> wrote:

Hi, Thanks for your quick reply. I assume you mean the part design ? This is open , but no icons. (see attachment) Regards Ludo

On Tue, 23 Aug 2022 at 18:26, Mark Ganson < @.***> wrote:

You must open the workbench first in order to see the toolbar icons.

— Reply to this email directly, view it on GitHub https://github.com/mwganson/ThreadProfile/issues/48#issuecomment-1224308621, or unsubscribe https://github.com/notifications/unsubscribe-auth/AMMBAJU3B4BQT4MHXDISPITV2T3TLANCNFSM57LPDF4A . You are receiving this because you authored the thread.Message ID: @.***>

Patsjemoe commented 1 year ago

Hi, Thanks for your quick reply. I assume you mean the part design ? This is open , but no icons. (see attachment) Regards Ludo

On Tue, 23 Aug 2022 at 18:26, Mark Ganson < @.***> wrote:

You must open the workbench first in order to see the toolbar icons.

— Reply to this email directly, view it on GitHub https://github.com/mwganson/ThreadProfile/issues/48#issuecomment-1224308621, or unsubscribe https://github.com/notifications/unsubscribe-auth/AMMBAJU3B4BQT4MHXDISPITV2T3TLANCNFSM57LPDF4A . You are receiving this because you authored the thread.Message ID: @.***>

mwganson commented 1 year ago

I am unable to duplicate the issue. Right click on the toolbar and ensure the Threadprofile Commands toolbar is not hidden. You should always provide your full freecad information. help -> about -> copy to clipboard. I don't know what your operating system is. My tests are on windows 10 and ubuntu inside a virtual box vm.